MIL-DTL-32480/5 Fitting, Adapter, 45 Degrees Elbow, Hydraulic and Pneumatic, Flareless Male to ORFS Bulkhead
A-A-2622 - Adapters, Pipe to Hose, Straight or Reducing
This commercial item description covers either straight or reducing adapters, to connect hose-threaded ends to pipe-threaded ends. Adapters covered by this commercial item description are intended for applications involving air, oil, gas, and water. They are to be used in connecting units having one type of thread to units having another type of thread.
A-A-2921 - Coupling Assemblies And Menders, Hose
This commercial item description (CID) covers the general requirements for coupling assemblies and menders, hose. Coupling assemblies and menders, hose covered by this CID are intended for commercial/industrial applications.
A-A-50434 - Patch Repair Emergency Water Activated Damage Control
A-A-50461 - Nozzles; Garden Hose (For 5/8- And 3/4-Inch Hose)
This commercial item description (CID) covers three different twist type flow control adjustable nozzles for use on 5/8 and 3/4-inch garden hose.
A-A-50494 - Exhaust Head, Steam
This description covers exhaust heads made of cast iron or steel, for moisture and oil entrapment and discharge of exhaust steam into the atmosphere.
A-A-50604 - Expansion Joint, Sleeved, (Non-Flanged), Fire-Retardant, With Retaining Clamps
A-A-50605 - Expansion Joint, Tfe Fluorocarbon Resin, Corrugated With Ductile Iron Flanges
A-A-50632 - Strainer, Simplex, Continuous Self-Cleaning
This commercial item description covers continuous self-cleaning simplex strainers.
A-A-52403 - Mender, Hose, Low Pressure
This CID covers requirements for hose menders made from metal tubing 3 inches long and beaded on both ends. The repair hose is used in low pressure applications with suitable hose clamps to complete the repair.
A-A-52405 - Tee, Hose (Low Pressure)
This commercial item description (CID) covers requirements for hose tees constructed either of corrosion resisting steel or of anodized aluminum alloy.
A-A-52484 - Coupler, Automotive Air Brake Line: Quick-Disconnect
This CID covers requirements for a quick-disconnect air brake line coupler half with a replaceable preformed packing designed for use on pneumatic hose where rapid coupling and uncoupling is required, and on vehicles where a low-pressure, quick- disconnect connection for air brake lines is needed.
A-A-52506 - Clamps, Hose
This CID covers metal hose clamps that are used for holding flexible ducts, or hose on to a male fitting. These hose clamps are generally used on coolant, fuel, oil, vacuum, and emission systems. The selection of type and size of hose clamps for a specific application involves factors, such as torque, vibration, and pressure requirements (see 7.4).
A-A-59000 - Strainers, Sediment, Pipeline, Self-Cleaning (Manual Or Automated)
This commercial item description covers both manual and automated self-cleaning pipeline sediment strainers.
AN2555 - Nozzle And Aircraft Fueling
AN286 - Fittings, Lubricator, Pressure&Grip, Type Pt (See Ms15006)
AN287 - Fittings & Lubricator, Pressure&Grip, Type D
AN290 - Cup & Grease
AN295 - Cup - Oil
AN4022 - Nipple Assembly - Priming System Jet
AN4023 - Elbow Assembly & Priming System Jet
AN4024 - Tee Assembly & Priming System Jet
AN4049 - Connection - Straight (4 Bolt Flange) Engine Oil (Use Ms28748)
AN4053 - Connection & Engine Oil 45 Deg. (4 Bolt Flanges) (Supersedes Usaf Dwg 4489739) (S/S By Ms&28749)
AN4111 - Connection - Engine Oil 90 Deg. (4 Bolt Flange)
AN4160 - Flange & Oil Connection, 3 Bolt
AN4161 - Flange & Oil Connection, 4 Bolt
AN4162 - Flange & Hose Connection
AN6027 - Coupling Half, Quick Disconnect
AN6220 - Coupling Half & Hydraulic Self Sealing (Bulkhead Fitting End)
AN6221 - Coupling Half & Hydraulic Self Sealing (Gasket Seal Fitting)
AN6222 - Coupling Half & Hydraulic Self Sealing (Swivel Type)
AN6223 - Flange - Hydraulic Self Sealing Coupling
AN6224 - Nut & Hydraulic Self Sealing Coupling
AN6241 - Coupling Assembly & Hydraulic Self Sealing (Gasket Seal And Bulkhead Fitting End)
AN6242 - Coupling Assembly & Hydraulic Self Sealing (Gasket Seal And Bulkhead Fitting End With Flange)
AN6243 - Coupling Assembly & Hydraulic Self Sealing (Gasket Seal And Universal Fitting End)
AN6271 - Hose Assembly & Hydraulic And Pneumatic, Detachable End Fitting Type, Swivel Fittings, For An&H&24 Hose (S/S By Ms28741)
AN6285 - Adapter, Air Pressure Gage (S/S By Sae-As5166 And Sae-As5167)
AN6289 - Nut, Tube (S/S By Sae-As5179)
AN6532 - Connector, Hose, Quick Disconnect, Female, Anti, G Suit (Use Ms 27755)
AN7023 - Connector-Vacuum Hose
AN737 - Clamp, Hose, Aircraft (Ss/ By Nas1924)
AN741 - Clamp & Tube
AN748 - Clamp-Hose (S/S By An737)
AN756 - Flange, Swivel Fitting, Flanged (S/S By Ms20756)
AN757 - Connector, Hose, Flanged, Fixed (S/S By Ms20757)
AN758 - Elbow - Hose, Flanged, Swivel , 45 Deg. (S/S By Ms20758
AN759 - Elbow & Hose, Flanged, Swivel, 90 Deg. (S/S By Ms&20759)
AN760 - Connector & Flared Tube, Flanged, Fixed(S/S By Ms&20759)
AN761 - Elbow & Flared Tube, Flanged, Swivel, 45 Deg. (S/S By Ms&20759)
AN762 - Elbow & Flared Tube, Flanged, Swivel, 90 Deg. (S/S By Ms&20759)
AN763 - Gasket - Swivel Fitting, Flanged
AN774 - Bolt - Flared Tube Fitting End Universal
AN775 - Bolt - Fluid Passage
AN776 - Connector, Multiple Fluid Pressure Line 90 Deg. (S/S By Sae-As5162)
AN777 - Connector, Multiple Fluid Pressure Line, 75 Deg. (S/S By Sae-As5163)
AN778 - Connector, Multiple Fluid Pressure Line, 45 Deg. (S/S By Sae-As5164)
AN779 - Connector, Multiple Fluid Pressure Line, Straight (S/S By Sae-As5165)
AN780 - Nipple, Union
AN781 - Nipple - Electrical Terminal (Use Ms 25171)
AN782 - Fitting End&Hydraulic And Pneumatic Hose Swivel, Detachable For An&H&24 Hose (S/S By Ms28740)
AN783 - Tee, Flared Tube, Internal Thread On Side (S/S By Sae-As1031)
AN784 - Tee, Flared Tube, Internal Thread On Run (S/S By Sae-As1032)
AN785 - Coupling, Union, Brazing
AN786 - Coupling-Airspeed Tube Union (Brazing)
AN790 - Elbow, Union
AN791 - Elbow, Union, 45 Degree
AN792 - Fitting Assembly & Hose Swivel Detachable (See Ms28740)
AN795 - Tee, Union
AN800 - Cone, Union
AN801 - Connection, Straight Flanged Hose (Supersedes Usaf Dwg 44D17541
AN8019 - Tee And Flyer'S Relief Tube
AN802 - Connection, 45 Deg. Flanged Hose, (Supersedes Usaf Dwg 44D17545)
AN803 - Connection, 90 Deg. Flanged Hose (Supersedes Usaf Dwg 17548)
AN804 - Tee, Flared, Tube With Bulkhead On Run (S/S By Sae-As1033)
AN805 - Nut, Union
AN806 - Plug Flared Tube (S/S By Sae-As5168)
AN807 - Adapter, Straight, Tube To Hose
AN814 - Plug & Bleeder - Screw Thread (S/S By Sae-As5169)
AN815 - Union - Flared Tube
AN816 - Adapter, Straight, Pipe To Tube (S/S By Sae-As5194)
AN817 - Nut, Tube Coupling, Long (S/S By Sae-As5206)
AN818 - Nut, Tube Coupling, Short
AN819 - Sleeve, Coupling (S/S By Ms20819)
AN821 - Elbow Flared Tube, 90 Degrees (S/S By Sae-As1034)
AN822 - Elbow - Flared Tube And Pipe Thread, 90Deg. (S/S By Ms20822)
AN823 - Elbow - Flared Tube And Pipe Thread, 45 Deg. (Use Ms 20823)
AN824 - Tee - Flared Tube (S/S By Sae-As1035)
AN825 - Tee - Flared Tube With Pipe Thread On Side (Use Ms 20825)
AN826 - Tee - Flared Tube With Pipe Thread On Run (Use Ms 20826)
AN827 - Cross, Flared Tube (S/S By Sae-As1036)
AN832 - Union, Flared Tube, 3/8 Bulkhead & Universal (S/S By Sae-As5406)
AN833 - Elbow Flared Tube And Bulkhead Universal, 90 Degrees (S/S By Sae-As1038)
AN834 - Tee, Bulkhead And Universal Flared Tube (S/S By Sae-As1039)
AN837 - Elbow, Flared Tube And Universal, 45 Degrees (S/S By Sae-As1040)
AN838 - Elbow, Tube To Hose, 90 Degrees
AN839 - Elbow, Tube To Hose, 45 Degrees
AN840 - Adapter, Straight, Pipe To Hose
AN841 - Adapter - Hose To Flared Tube
AN842 - Elbow - Pipe To Hose, 90 Degrees
AN844 - Elbow - Pipe To Hose, 45 Degrees
AN846 - Elbow, Hose, 45 Degrees
AN848 - Elbow, Hose, 90 Degrees
AN849 - Nipple, Hose
AN860 - Flange & Tube Reinforcing
AN866 - Flange & Straight Threads & Riveting
AN867 - Flange & Pipe Thread Welding
AN868 - Flange And Straight Threads And Welding
AN869 - Flange And Straight Threads And Riveting
AN870 - Flange And Straight Threads And Welding
AN871 - Flange And Straight Thread Boss Welding (S/S By Sae-As5227)
AN872 - Flange & Circular Formation Light Mounting
AN876 - Collar And Tubing End Hose Connection
AN891 - Cross & Primer And Gauge
AN892 - Elbow And Hose, Oil Drain
AN893 - Bushing Screw Thread Reducer (S/S By Sae-As5172)
AN894 - Bushing, Screw Thread, Expander (S/S By Sae-As5173)
AN906 - Plug & Sq. Hd. Drilled For Locking & Tapped
AN907 - Plug And Square Head, Drilled For Locking
AN908 - Plug - Square Head, Drilled For Locking
AN909 - Plug & Square Head, Drilled For Locking
AN910 - Coupling, Pipe
AN911 - Nipple, Pipe
AN912 - Bushing, Pipe
AN913 - Plug, Square Head Pipe Thread (Use Ms-20913)
AN914 - Elbow, Pipe, Internal And External Thread, 90 Degrees
AN915 - Elbow, Pipe, 45 Degrees
AN916 - Elbow, Pipe, Internal Thread, 90 Degrees
AN917 - Tee, Pipe
AN917/2 - Tee, Pipe
AN918 - Cross, Pipe
AN919 - Reducer - External Thread Flared Tube (See Notice 3 For Replacement Information)
AN924 - Nut, Tube, Bulkhead And Universal Fitting
AN926 - Tee - Internal Screw Thread (S/S By An938)
AN927 - Elbow - Internal Screw Thread (S/S By An939)
AN928 - Elbow - Internal Screw Thread 45 Deg. (S/S By An941)
AN929 - Cap Insert, Assembly, Pressure Seal, Flared Tube Fitting
AN932 - Plug, Pipe, Countersink Hex Head (Use Ms 27769
AN933 - Plug, Pipe, Hex Head (S/S By Sae-As4862)
AN937 - Cross, Tube, Internal Thread (S/S By Sae-As5193)
AN938 - Tee, Tube, Internal Thread (S/S By Sae-As5192)
AN939 - Elbow, Tube, Internal Thread, 90 Degrees (S/S By Sae-As5190)
AN941 - Elbow, Tube, Internal Thread, 45 Deg. (S/S By Sae-As5191)
AN944 - Fitting-Lubricator, Aircraft Pressure Grip, Type Nft (Use Ms-15001 And Ms-15002
ANA-BUL-431 - Air Force-Navy Aeronautical Bulletin Fittings, Flared, Classification Of Defects
This Bulletin, when called out in a specification or in a procurements document, establishes a classification of commonly occurring defense applicable to flared fluid fittings.
AND10050 - Bosses, Standard Dimensions For Gasket Seal Straight Thread
AND10052 - Bosses - Standard Dimensions For External Pipe Thread (S/S By Sae-As5201)
AND10053 - Boss, Pipe-Thread, Internal-Standard Diensions For
AND10056 - Fitting End, Standard Dimensions For Flared Tube Connection And Gasket Seal (S/S By Ms33656)
AND10057 - Fitting End, Standard Dimensions For Bulkhead Flared Tube Connections (S/S By Ms33657)
AND10058 - Fitting End - Hose Connection, Standard Dimensions For (S/S By Ms33658)
AND10059 - Fittings - Styles Of Pipe Threaded, Flared Tube And Hose
AND10060 - Tubing End, Hose Connection, Standard Dimensions For (S/S By Ms33660)
AND10061 - Tubing End, Standard Dimensions For Flared (S/S By Ms33584)
AND10070 - Adapter - Oxygen Filler (S/S By An6027)
AND10071 - Boss And Installations - Air Connection (An6287)
AND10077 - Fitting End, Standard Dimensions For Taper Pipe Thread (For Use On An Standard Parts) (S/S By Ms33677)
AND10078 - Tubing End, Standard Dimensions For Double Flare (S/S By Ms33583)
AND10086 - Fitting Installation - Flared Tube And Hose, Swivel (S/S By Ms33786)
AND10089 - Fitting End, Design Standard For Cone Connection
AWWA-C110 - Ductile Iron And Gray Iron Fittings, 3 Inch Through 48 Inch For Water And Other Liquids
This standard covers 3-48in. gray-iron and/or ductile-iron fittings to be used with gray-iron or ductile-iron pipe for water and other liquids.
AWWA-C153 - Ductile-Iron Compact Fittings, 3 In. Through 16 In., For Water And Other Liquids
This standard covers 3-in. through 16-in. ductile-iron compact fittings to be used with ductile-iron pipe or pipe made of other materials with similar outside diameters for conveying water and other liquids.
AWWA-C207 - Steel Pipe Flanges For Waterworks Service-Sizes 4 Inches Through 144 Inches
This standard covers two types of flanges that may be used interchangeably if the dimensions given in the standard are used.
AWWA-C208 - Steel Water Pipe Fittings, Dimensions For Fabricated
This standard provides overall dimensions for fabricating steel water pipe fittings for sizes 6 in. through 144 in. (150 mm through 3,600 mm)* for water transmission and distribution facilities.
AWWA-C209 - Tape, Cold-Applied, Coatings For The Exterior Of Special Sections, Connections, And Fittings For Steel Water Pipelines
AWWA-C800 - Valves And Fittings, Underground Service Line
CGA-V6 - Liquid, Standard Bulk Refrigerated Transfer Connections
CISPI301 - Pipe, Soil, Hubless Cast Iron, And Fittings For Sanitary And Storm Drain, Waste, And Vent Piping Applications
This standard covers the pipe and fittings, as listed in the following tables.
CISPI310 - Coupling For Use In Connection With Hubless Cast Iron Soil Pipe And Fittings For Sanitary And Storm Drain, Waste, And Vent Piping Applications, Specification For
This specification covers the coupling assembly identified in the following tables.
FED-STD-263 - Tube Fittings, Copper And Copper Alloy, Wrought Or Cast Solder Ends
GGG-C-2794 - Cups, Oil, Lubricating, And Oilers, Self-Feeding, General Specification For
This specification covers oil cups used for lubrication wearing parts of mechanical equipment.
L-F-1546 - Fittings, Plastic Pipe (Adapters, Couplings, Elbows, And Tees For Polyethylene Pipe) (S/S By Astm-D2609)
L-P-1221 - Pipe And Fittings, Plastic, Rigid (Styrene-Rubber, Drain) (S/S By Astm-D2852)
This specification covers styrene-rubber plastic pipe, socket fittings and threaded adapters which are resistant to the action of organic matter, alkalies and acids normally existing in ground and surface water drainage systems.
MIL-A-11610 - Adapter, Line, Filling, 1-Ton Container, M1
This specification covers a filling line adapter for use on three types of 1-ton containers.
MIL-A-16726 - Adapter, Pipe, Flanged To Thread (Use Ansi B16.5, Ansi B16.24 And Ww-N-351)
MIL-A-16728 - Adapter, Pipe, Brass, Flanged To Threaded (S/S By Mil-A-16726)
MIL-A-16729 - Adapters, Tee, 12 Inch, Black Steel Pipe
MIL-A-16730 - Adapters, Pipe, Black Steel, Flanged 90 Degree Elbow (S/S By Mil-F-3268)
MIL-A-16731 - Adapters, Reducing, Pipe, Black Steel, Flanged To Butt-Welding (S/S By Mil-F-3268)
MIL-B-16542 - Bronze For Screw Pipe Fitting, Castings (Use Qq-L-225)
MIL-B-20235 - Bushings, Pipe (For Shipboard Use) (Use Ww-P-471)
MIL-C-10387 - Couplings, Clamp, Pipe; With Bolts And Synthetic-Rubber Gaskets For Grooved-End Pipe (S/S By A-A-52598)
MIL-C-10387 - Couplings, Clamp, Pipe; With Bolts And Synthetic-Rubber Gaskets For Grooved-End Pipe (S/S By A-A-52598)
This specification covers clamp-type couplings, with for grooved-end pipe, used with fuel.
MIL-C-11418 - Clamps, Leak Repair, Pipe Coupling: For Use Over Grooved-Type Couplings
This specification is approved for use by all Departments and Agencies of the Department of Defense.
MIL-C-11514 - Clamp, Hose, 3/4-Inch I.D., For 5/16-Inch I.D. Oxyacetylene Hose
MIL-C-11569 - Clamps, Hose, Water, Universal 3/8- To 1-Inch And 1- To 3-Inch (S/S By Sae-J536 Or Ww-C-440)
This specification covers two sizes of adjustable, band-type hose clamps.
MIL-C-11760 - Clamps, Hose, Pneumatic, For Universal Couplings (S/S By Sae-J536)
MIL-C-12386/1 - Clamp, Repair, Pipe; With Gasoline-Resistant Gasket; Type I, Split Application
MIL-C-12386/2 - Clamp, Repair, Pipe; With Gasoline-Resistant Gasket; Type Ii, Pinhole Application
MIL-C-1258 - Cups, Oil, Lubricating, And Oilers, Self-Feeding (S/S By Ggg-C-2794)
This specification covers oil cups used for lubricating wearing parts of mechanical equipment.
MIL-C-16247 - Coupling, Clamp, Pipe, Bolted (For Plain End Pipe)
MIL-C-19179 - Coupling Assembly, Quick-Disconnect, Fuel (S/S By Mil-C-24788)
MIL-C-22263/1 - Coupling, Type I, Rolled Bead Connecting Fluid Line, Flexible, Maximum Envelope And Weight (See Notice 3 For Replacement Information)
MIL-C-22263/2 - Coupling, Type Ii, Swaged Ferrule Connecting Fluid Line, Flexible, Maximum Envelope And Weight (S/S By Mil-Dtl-22263)
MIL-C-22263/3 - Swage End Ferrule, Variable Cavity (S/S By Mil-Dtl-22263)
MIL-C-23303 - Closure, Hinged
MIL-C-23465 - Connection, Flexible; Pipe Loops, For Steam To Main And Auxiliary Turbines (Sizes 4 And 6 Inches Ips)
MIL-C-24237 - Coupling, Quick-Disconnect For Abrasive Blasting Hose
MIL-C-24356 - Coupling, Segmented And Split Clamps Reattachable, 2-1/2-, 4-, 6- And 7-Inch, For Refueling-At-Sea Hose
This specification covers 2-1/2-, 4-, 6- and 7-inch segmented, reattachable couplings and split clamps intended for use on 2-1/2-, 4-, 6- and 7-inch hose meeting the requirements of MIL-B-22240, and primarily intended for use in, but not limited to, refueling-at-sea.
MIL-C-24516 - Couplings And Adapters, Fire Hose, Quarter Turn (S/S By Ww-C-621)
MIL-C-25014 - Coupling, Flexible, Fuel Line, 125 Psi
MIL-C-25531/1 - Coupling Half, Quick Disconnect, Pneumatic Starter, External, Low Pressure, Direct Release (S/S By Mil-Dtl-25531)
MIL-C-26516 - Cap, Lubrication Fitting, Protective
This specification covers a reusable, nonmetallic type of cap for use in protecting lubrication fittings during sand blasting and painting operations.
MIL-C-27487 - Coupling Halves, Quick-Disconnect, Cam-Locking Type (S/S By A-A-59326)
MIL-C-28522 - Coupling Adapter, Quick Disconnect (S/S By Mil-C-27487)
MIL-C-3486 - Couplings And Coupling Halves-Quick Disconnect, Air Hose, Bowes Type (S/S By A-A-50431)
This specification covers quick-acting and self-locking couplings, coupling halves and fittings for use on pneumatic hose where rapid coupling and uncoupling are required.
MIL-C-38178 - Coupling Assemble, Quick Disconnect, Fuel Grk-12/S32R-2 (S/S By Mil-C-38479)
MIL-C-38179 - Coupling Assembly, Quick Disconnect, Fuel Gru-13/E
MIL-C-38404 - Couplings, Hose, Reattachable Screw-On (S/S By Sae-As38404)
This specification covers screw-on type reattachable couplings for hoses conforming to MIL-H-6615, MIL-H-26521, as specified (see 6.2).
MIL-C-38405 - Coupling, Hose, Reattachable Clamp-On (Use Mil-H-26894)
MIL-C-4109 - Coupling Halves, Low Pressure, Air Hose, Quick-Disconnect (S/S By A-A-59439)
MIL-C-52545 - Coupling, Hose, Reusable, Hydraulic, Oil Suction 2 Bolt Clamp On, General Specification For
MIL-C-52545/1 - Couplings, Hose, Reusable, Hydraulic Oil Suction, 2 Bolt Clamp On, Straight
MIL-C-52545/2 - Coupling, Hose, Reusable, Hydraulic Oil Suction, 2 Bolt Clamp On, 45 Degrees Elbow
MIL-C-52545/3 - Couplings, Hose, Reusable, Hydraulic Oil Suction, 2 Bolt Clamp On, 90 Degrees Elbow
MIL-C-52705 - Couplings: Hose, Steam
This specification covers steam hose couplings for conveyance of saturated and superheated steam. The working pressure of the couplings shall be at least 250 psig (pounds per square gauge) at a temperature of 450 Degrees F.
MIL-C-53071 - Coupling Assemblies, Quick-Disconnect, Sexless Type (S/S By A-A-59377)
This specification covers the requirements for procurement of quick-disconnect coupling assemblies sexless type, used to provide a positive seal disconnect between components of an aircraft fuel servicing system.
MIL-C-5502 - Couplings, Aircraft Hydraulic Self-Sealing ( ) Canceled, Use Mil-C-25427 (Asg)( )
MIL-C-62005 - Coupling, Automotive Air Brake Lines: Quick-Disconnect (S/S By A-A-52484)
This specification covers self-locking coupling halves designated for use on pneumatic hose where rapid coupling and uncoupling is required.
MIL-C-62166 - Coupling Assembly, Quick Disconnect Duo-Male Ends With Check Valves
MIL-C-81337 - Coupling Assembly, Self-Sealing, Quick Disconnect, Hydraulic (Waterbased Hydraulic Fluid)
MIL-C-83390 - Connector, Hose, Quick Acting, Male, Anti-G Garment
This specification covers one type of quick-acting, male connector for the hose of an anti-g garment. The connector is designated MXU-636/P.
MIL-D-82036 - Dampner, Pressure Fluid (For Water-Hammer)
MIL-DTL-1213 - Cups, Grease
This specification covers general requirements for cups, grease used as containers to distribute lubricant material to moving metal parts in order to reduce friction.
MIL-DTL-17813 - Expansion Joints, Pipe, Metallic Bellows, General Specification For
This specification covers metallic bellows expansion joints used to absorb dimensional movement in piping systems. This movement may be caused by thermal expansion, contraction, or adjacent structural movements.
MIL-DTL-18182 - Union, Pipe, Forged Steel, Threaded, Water-Oil-Gas (2,000, 3,000 And 6,000 Lb/In2)
This specification covers forged steel threaded pipe unions having ground joint union seats adaptable for severe conditions.
MIL-DTL-22263 - Coupling Fuel Line, Flexible, 125 Psi General Specification For
This specification covers flexible couplings for joining variable ferrule type tubing in military aircraft fuel systems.
MIL-DTL-23467 - Fitting And Flanges, Wrought Seamless, Butt And Socket Welding, Austenitic Corrosion-Resistant Steel
This specification covers the requirements for austenitic, corrosion-resistant steel, butt and socket welding, fittings and flanges, including bosses, nozzles and other weld attachments; and tube and pipe with bosses, nozzles and other welded attachments.
MIL-DTL-23508 - Fittings And Flanges, Wrought, Seamless, Butt And Socket Welding, Nickel-Chromium-Iron Alloy (Uns N06600)
This specification covers the requirements for nickel-chromium-alloy butt and socket welding fittings, and flanges, including bosses, nozzles and other welded attachments: and tube and pipe with bosses, nozzles and other welded attachments.
MIL-DTL-23509 - Fittings And Flanges, Wrought, Seamless Butt And Socket Welding, Nickel-Copper Alloy (Uns N04400)
This specification covers the requirements for nickel-copper alloy butt and socket welding, fittings and flanges, including bosses, nozzles and other welded attachments; and tube and pipe with bosses, nozzles and other welded attachments.
MIL-DTL-24339 - Fittings And Flanges, Wrought, Seamless, Butt And Socket Welding Carbon Steel
This specification covers the requirements for carbon steel butt and socket welding fittings and flanges, including bosses, nozzles and other welded attachments; and tube and pipe with bosses, nozzles and other welded attachments.
MIL-DTL-24342 - Fitting And Flanges, Wrought Seamless, Butt And Socket Welding, 70-30 Copper-Nickel Alloy (Uns C71500)
This specification covers the requirements for copper-nickel alloy butt and socket welded fittings and flanges, including bosses, nozzles and other welded attachments; and tube and pipe bosses, nozzles and other welded attachments.
MIL-DTL-24788 - Coupling Assembly, Semi-Dry-Break, Quick-Disconnect Fuel With Or Without Continuity Switch
This specification covers the requirements for acquisition of a semi-dry-break, quick-disconnect fuel coupling assembly, with or without continuity switch used in connecting fueling nozzles to aircraft refueling hoses and refueling pantographs in aircraft refueling systems.
MIL-DTL-25427 - Coupling Assembly, Hydraulic, Self-Sealing, Quick Disconnect, General Specification For
This specification covers the detail requirements for aircraft hydraulic self-sealing quick disconnect couplings, for use in types I and II hydraulic systems (-65 Degrees F to +275 Degrees F temperature range) as defined by SAE-AS5440.
MIL-DTL-25531 - Coupling Half, Quick Disconnect, Pneumatic Starter, External, Low Pressure
This specification covers the general requirements for quick-disconnect external low pressure half couplings for a pneumatic starter, with primary and secondary methods of release and, automatic pressure lock with self-closing valves.
MIL-DTL-25677 - Adapter, Cap, And Nozzle, Pressure Lubricating Oil Servicing, Aircraft, General Specification For
This specification covers the requirements for an adapter, cap, and nozzle, pressure lubricating oil servicing, aircraft, for ground servicing of aircraft turbine engines.
MIL-DTL-27272 - Fittings, Polytrafluoroethylene Hose, High-Temperature, Medium-Pressure, General Specification For
This specification covers the requirements for fittings for medium-pressure and high-temperature applications with polytetrafluoroethylene (PTFE) hose conforming to MIL-DTL-27267 and MIL-DTL-25579 (see 3.1 and 6.1).
MIL-DTL-38726 - Adapter Assembly, Reusable, Flexible Hose, Low Pressure
This specification covers a reusable, swivel nut type adapter assembly for use with low-pressure hose assemblies.
MIL-DTL-5070 - Adapter, Hose To Tube, Pipe And Flange, Reusable - Hydraulic, Fuel, And Oil Lines, General Specification For
This specification covers general requirements for adapter, hose to tube, pipe, and flange, reusable - hydraulic, fuel, and oil lines.
MIL-DTL-51073 - Coupling Halves, Quick Disconnect
This specification covers coupling halves for quick release of an individual's mask from a vehicle filter unit.
MIL-DTL-51234 - Coupling Assembly, Quick Disconnect, Plain And Self-Sealing
This specification covers three types of quick disconnect couplings.
MIL-DTL-52525 - Fittings, Hose, Hydraulic, Reusable, Field-Attachable And Clamp-Halves, To Mate With Sae-J517 Type Hoses, General Specification For
This specification covers fittings, hose, reusable, field attachable and clamp-halves, to mate with SAE-J517 type hoses, general specification for. The connectors are reusable, field-attachable, hydraulic, 37 Degrees flare and 4-bolt split-flange hose fittings, and 4-bolt split-flange clamp-halves, for use with wire reinforced hydraulic hose in accordance with MIL-DTL-52471.
MIL-DTL-52525/1 - Fittings, Hose, Screw-On To 37 Degrees Flare Female Swivel, Straight, Sae-J516 Type, For Assembly With Sae-J517, Type 100R2 Hose
MIL-DTL-52525/10 - Fittings, Hose, Screw-On To 4-Bolt Split-Flange, Straight
MIL-DTL-52525/11 - Fittings, Hose, Screw-On To 4-Bolt Split-Flange, 45 Degrees Bent Tube
MIL-DTL-52525/12 - Fittings, Hose, Screw On To Split-Flange 90 Degrees Bent
MIL-DTL-52525/13 - Fittings, Hose, Crimp Type, Split-Flange Straight
MIL-DTL-52525/14 - Fittings, Hose Crimp Type, Split-Flange, 45 Degree Bent
MIL-DTL-52525/15 - Fittings, Hose, Screw-On To 4-Bolt Split-Flange, 90 Degree Bent Tube
MIL-DTL-52525/16 - Fittings, Clamp-Halves, For 4-Bolt Split-Flange, Sae-J518, Type Split-Flange Clamp (Sfc)
MIL-DTL-52525/17 - Fittings, Clamp-Halves, Flange To Port, For 4-Bolt Split-Flange
MIL-DTL-52525/2 - Fittings, Hose, Screw-On To 37 Degrees Flare Female Swivel, 45 Degrees Bent Tube
MIL-DTL-52525/23 - Fittings, Hose, Clamp-On To 4-Bolt Split-Flange, Straight, Type 100R10 (S/S By Mil-Dtl-52525/43)
MIL-DTL-52525/24 - Fittings, Hose, Clamp-On To 4-Bolt Split-Flange, 45 Degree Bent Tube, Type 100R10 (S/S By Mil-Dtl-52525/44)
MIL-DTL-52525/25 - Fittings, Hose, Clamp-On To 4-Bolt Split-Flange, 90 Degrees Bent Tube, Short Drop, Type 100R10 (S/S By Mil-Dtl-52525/45)
MIL-DTL-52525/3 - Fittings, Hose, Screw-On To 37 Degrees Flare Female Swivel, 90 Degrees Bent Tube, Short Drop
MIL-DTL-52525/31 - Fittings, Hose, Screw-On To 37 Degrees Flare Female Swivel
MIL-DTL-52525/34 - Fittings, Hose, Screw-On To 4-Bolt Split-Flange, Straight
MIL-DTL-52525/35 - Fittings, Hose, Screw-On To 4-Bolt Split-Flange, 45 Degrees Bent Tube
MIL-DTL-52525/36 - Fittings, Hose, Crimp Type, Split-Flange 90 Degrees, Bent Tube
MIL-DTL-52525/37 - Fittings, Hose, Screw-On To 37 Degrees Flare Female Swivel, Straight
MIL-DTL-52525/38 - Fittings, Hose, Screw-On To 37 Degrees Flare Female Swivel, 45 Degrees Bent Tube
MIL-DTL-52525/39 - Fittings, Hose, Screw-On To 37 Degrees Flare Female Swivel, 90 Degrees Bent Tube
MIL-DTL-52525/4 - Fittings, Hose, Screw-On To 37 Degrees Flare Female Swivel, 90 Degrees Bent Tube, Long Drop
MIL-DTL-52525/40 - Fittings, Hose, Crimp Type, Split-Flange, Straight
MIL-DTL-52525/41 - Fittings, Hose, Crimp Type, Split-Flange, 45 Degrees Bent Tube
MIL-DTL-52525/42 - Fittings, Hose, Crimp Type, Split-Flange 90 Degrees Bent
MIL-DTL-52525/5 - Fittings, Hose, Screw-On To 37 Degrees Flare Female Swivel, Straight
MIL-DTL-52525/6 - Fittings,Hose, Screw-On To 37 Degrees Flare Female Swivel, 45 Degrees Tube
MIL-DTL-52525/7 - Fittings, Hose, Screw-On To 37 Degrees Flare Female Swivel, 90 Degrees Bent Tube, Short Drop
MIL-DTL-52525/8 - Fittings, Hose, Screw-On To 37 Degrees Flare Female Swivel, 90 Degrees Bent Tube, Long Drop
MIL-DTL-52525/9 - Fittings, Hose, Screw-On To 37 Degrees Flare Female Swivel, Straight
MIL-DTL-52618 - Fittings, Pipe, Aluminum-Alloy Threaded, 150-Pound, General Specification For
This specification covers aluminum-alloy threaded pipe fittings, 150-pound class.
MIL-DTL-52618/1 - Fittings, Pipe, Aluminum-Alloy Threaded, 150-Pound, 90-Degree Elbows, Tees, Crosses, 45-Degree Elbows And Couplings (Straight Sizes)
MIL-DTL-52618/2 - Fittings, Pipe, Aluminum-Alloy Threaded 150-Pound, Reducers And Close And Open Pattern Return Bends (Straight Sizes)
MIL-DTL-52618/3 - Fittings, Pipe, Aluminum-Alloy Threaded, 150-Pound, 90-Degree Elbows (Reducing Sizes)
MIL-DTL-52618/4 - Fittings, Pipe, Aluminum-Alloy Threaded, 150-Pound, Tees (Reducing Sizes)
MIL-DTL-52618/5 - Fittings, Pipe, Aluminum-Alloy Threaded, 150-Pound, 90-Degree And 45-Degree Street Elbows
MIL-DTL-52618/6 - Fittings, Pipe, Aluminum-Alloy Threaded, 150-Pound, Caps
MIL-DTL-52618/7 - Fittings, Pipe, Aluminum-Alloy Threaded, 150-Pound, Square Head And Square Socket Plugs
MIL-DTL-52618/8 - Fittings, Pipe, Aluminum-Alloy Threaded, 150-Pound, Outside Head, Inside Head, And Face Bushings
MIL-DTL-52618/9 - Fittings, Pipe, Aluminum-Alloy Threaded, 150-Pound, Crosses (Reducing Sizes)
MIL-DTL-5513 - Swivel Joint, Hydraulic
This specification establishes the requirements for hydraulic swivel joints (see 6.1).
MIL-DTL-6001 - Fitting; Aircraft, Solder Type, Tube
This specification covers the general requirements for fittings, aircraft, solder type, tube.
MIL-DTL-83296 - Fittings, Corrosion Resistant Steel, High Temperature, High Pressure (3000 Psi), Hydraulic And Pneumatic, General Specification For
This specification covers the requirements for fittings, corrosion resistant steel, high temperature, high pressure (3000 psi), hydraulic and pneumatic. These fittings are for use with MIL-DTL-83798 hose, conductive polytetrafluoroethylene (PTFE) smooth bore tube (see 6.1).
MIL-DTL-83798 - Fitting, Rubber Hose, Lightweight, Medium Pressure, General Specification For
This specification covers the requirements for fitting, rubber hose, lightweight, medium pressure. These are field attachable fluid fittings for use with a lightweight, medium pressure, rubber hose with operating limits of -65 degrees F to 250 degrees F and 200 to 1000 psig.
MIL-DTL-83798/1 - Fittings, Rubber Hose, Lightweight, Medium Pressure, Flared, Swivel Nut, Straight
MIL-DTL-83798/2 - Fittings, Rubber Hose, Lightweight, Medium Pressure, Flared, Swivel Nut, 45 Degrees
MIL-DTL-83798/3 - Fittings, Rubber Hose, Lightweight, Medium Pressure, Flared, Swivel Nut, 90 Degrees
MIL-DTL-83798/4 - Fittings, Rubber Hose, Lightweight, Medium Pressure, Flareless, Swivel Nut, Straight
MIL-DTL-83798/5 - Fittings, Rubber Hose, Lightweight, Medium Pressure, Flareless, Swivel Nut, 45 Degrees
MIL-DTL-83798/6 - Fittings, Rubber Hose, Lightweight, Medium Pressure, Flareless, Swivel Nut, 90 Degrees
MIL-DTL-83798/7 - Fittings, Rubber Hose, Lightweight, Medium Pressure, Swivel Flange, Straight
MIL-DTL-83798/8 - Fittings, Rubber Hose, Lightweight, Medium Pressure, Swivel Flange, 45 Degrees
MIL-DTL-83798/9 - Fittings, Rubber Hose, Lightweight, Medium Pressure, Swivel Flange, 90 Degrees
MIL-DTL-85061 - Coupling, Fuel Line, Flexible, 125 Psi
This specification covers flexible couplings for joining tubing with SAE-AS5131 style A beaded ends for use in aircraft fuel and vent systems (see 6.1).
MIL-DTL-8783 - Clamp, Hose, Flat Band 500 Degrees F, General Specification For
This specification covers flat band, T-bolt latch clamps and flat band, quick-release latch clamps used in various aircraft installations of duct, hose and flex tubing.
MIL-DTL-8789 - Fitting End, Attachable, Hydraulic, High Pressure (3,000 Psi), General Specification For
This specification covers the requirements for fitting end, attachable, hydraulic pressure (3000 psi).
MIL-E-15330 - Expansion Joint, Pipe, Nonmetallic, Fire-Retardant (S/S By Astm-F1123, A-A-50604, A-A-50605)
This specification covers the construction and material requirements for fire-retardant, nonmetallic expansion joints.
MIL-E-17750 - Elbow, Pipe With Union Tailpiece, Non-Throttling Type, For Gravity-Flow Hot Water Radiators
MIL-E-17814 - Expansion Joints, Pipe, Slip-Type, Packed
This specification covers guided packed slip-type expansion joints used to absorb only axial movement in piping systems. This movement may be caused by thermal expansion, contraction or other factors.
MIL-E-18435 - Exhaust Head, Pipe (S/S By A-A-50494)
This specification covers cast iron and steel exhaust heads for moisture and oil entrainment and discharge of exhaust steam into the atmosphere.
MIL-E-23616 - Expansion Joint, Non Flanged Synthetic Rubber, Fire Retardant, 0-150 Psi Oil Or Water Service (2 Inch To 12 Inch Nominal Pipe Size) (S/S By Mil-E-15330)
MIL-F-1181 - Fittings, Pipe, Bronze, (Threaded) (S/S By Ww-P-460)
MIL-F-1183 - Fittings, Pipe, Cast Bronze, Silver-Brazing, General Specification For
This specification covers pipe fittings of cast bronze with at least one end for silver-brazing into steam, air, oil or water piping systems.
MIL-F-1183/1 - Fittings, Pipe, Cast Bronze, Silver Brazing; Bend, Pipe, Return
MIL-F-1183/10 - Fitting, Pipe, Cast Bronze, Silver-Brazing; Union, Pipe
MIL-F-1183/11 - Fitting, Pipe, Cast Bronze, Silver-Brazing; Union Elbow, Pipe And Union Tee, Pipe
MIL-F-1183/12 - Fittings, Pipe, Cast Bronze, Silver-Brazing; With Flanged Ends(S)
MIL-F-1183/2 - Fittings, Pipe, Cast Bronze, Silver-Brazing; Cap, Pipe
MIL-F-1183/3 - Fitting, Pipe, Cast Bronze, Silver Brazing; Coupling, Pipe
MIL-F-1183/4 - Fittings, Pipe, Cast Bronze, Silver-Brazing; Cross, Pipe
MIL-F-1183/5 - Fittings, Pipe, Cast Bronze, Silver-Brazing; Elbow, Pipe
MIL-F-1183/6 - Fittings, Pipe, Cast Bronze, Silver-Brazing; Lateral, Pipe
MIL-F-1183/7 - Fitting, Pipe, Cast Bronze,Silver-Brazing; Plug, Pipe
MIL-F-1183/8 - Fitting, Pipe, Cast Bronze, Silver-Brazing; Reducer, Pipe
MIL-F-1183/9 - Fittings, Pipe, Cast Bronze, Silver-Brazing; Tee, Pipe
MIL-F-1184 - Fittings, Pipe, Brass Or Bronze (Threaded) 125-Pound (S/S By Ww-P-460)
MIL-F-1224 - Fittings, Tube, Brass Or Bronze, 45 Degree Flared (S/S By Sae-J512)
MIL-F-15049 - Fitting, Tube, Brass Or Copper, 45 Degree Flared 230557
MIL-F-16735 - Fitting, Pipe Rapid-Action-Coupling, 6-Inch
MIL-F-17823 - Flanges, Pipe, Carbon Steel, 300 Psi, W.S.P. (Navy)
MIL-F-18032 - Fitting, Pipe, Butt Welding, Ferrous Metal (Use Ansi B16.9 And Ansi B16.28)
MIL-F-18180 - Flanges And Flanged Fittings, Pipe, Steel, Classes 150, 300, 400, 600, 900, 1500 And 2500, General Specification For (S/S By Asme-B16.5)
This specification covers cast, forged, and deep drawn plate steel pipe flanges and cast and forged flanaged fittings in the pressure-temperature ratings of class 250,300, 400, 600, 900, 1500 and 2500. Reducing flanges without hubs and blind flanges may be manufactured from steel plate.
MIL-F-18180/1 - Flanges And Flanged Fittings, Pipe, Steel, Classes 150, 300, 400, 600, 900, 1500 And 2500, Welding Neck Flanges (S/S By Asme-B16.5)
MIL-F-18180/10 - Flanges & Flanged Fitting, Pipe, Steel, Classes 150, 300, 4008 600, 9008 1500 & 2500, Straight & Reducing Sizes Tees (S/S By Asme-B16.5)
MIL-F-18180/11 - Flanges & Flanged Fittings, Pipe, Steel, Classes 150, 300, 400, 600, 900, 1500 & 2500 Straight & Reducing Size Base Tees (S/S By Asme-B16.5)
MIL-F-18180/12 - Flanges & Flanged Fittings, Pipe, Steel, Classes 150, 300, 400, 600, 900, 1500 & 2500, Straight & Reducing Size, Side Outlet Tees (S/S By Asme-B16.5)
MIL-F-18180/13 - Flanges & Flanged Fittings, Pipe, Steel, Classes 150, 300, 400, 600, 900, 1500 & 2500, Straight & Reducing Sizes Crosses (S/S By Asme-B16.5)
MIL-F-18180/14 - Flanges & Flanged Fittings, Pipe, Steel, Classes 150, 300, 400, 600, 900, 1500 & 2500, Straight & Reducing Size, Side Outlet Crosses (S/S By Asme-B16.5)
MIL-F-18180/15 - Flanges & Flanged Fittings, Pipe, Steel, Classes 150, 300, 400, 600, 900, 1500 & 2500, 45 Deg., Straight & Reducing Sizes Laterals (S/S By Asme-B16.5)
MIL-F-18180/16 - Flanges & Flanged Fittings, Pipe, Steel, Classes 150, 300, 400, 600, 900, 1500 & 2500, Concentric Reducers (S/S By Asme-B16.5)
MIL-F-18180/17 - Flanges & Flanged Fittings, Pipe, Steel, Classes 150, 300, 400, 600, 900, 1500 & 2500, Eccentric Reducers (S/S By Asme-B16.5)
MIL-F-18180/18 - Flanges & Flanged Fittings, Pipe, Steel, Classes 150, 300, 400, 600, 900, 1500 & 2500, Straight & Reducing Size, True Wyes (Y) (S/S By Asme-B16.5)
MIL-F-18180/2 - Flanges And Flanged Fittings, Pipe, Steel, Classes 150, 300, 400, 600, 900, 1500 And 2500, Socket Welding Flanges (S/S By Asme-B16.5)
MIL-F-18180/3 - Flanges And Flanged Fittings, Pipe, Steel, Classes 150, 300, 400, 600, 900 1500, And 2500; Slip-On Welding Flanges (S/S By Asme-B16.5)
MIL-F-18180/4 - Flanges And Flanged Fittings, Pipe, Steel, Classes 150, 300, 400, 600, 900, 1500 And 2500, Lapped Flanges (S/S By Asme-B16.5)
MIL-F-18180/5 - Flanges And Flanged Fittings, Pipe, Steel, Classes 150, 300, 400, 600, 900, 1500 And 2500 Threaded Flanges (S/S By Asme-B16.5)
MIL-F-18180/6 - Flanges And Flanged Fittings, Pipe, Steel, Classes 150, 300, 400, 600, 900, 1500 And 2500, Blind Flanges (S/S By Asme-B16.5)
MIL-F-18180/7 - Flanges And Flanged Fittings, Pipe, Steel, Classes 150, 300, 400, 600, 900, 1500 And 2500, 45 And 90 Degree, Straight And Reducing Size Elbows (S/S By Asme-B16.5)
MIL-F-18180/8 - Flanges & Flanged Fittings, Pipe, Steel, Classes 150, 300, 400, 600, 900, 1500 & 2500, 90 Deg., Straight & Reducing Sizes Base Elbows (S/S By Asme-B16.5)
MIL-F-18180/9 - Flanges & Flanged Fittings, Pipe, Steel, Classes 150, 300, 400, 600, 900, 1500 & 2500, 90 Degree, Straight & Reducing Size, Side Outlet Elbows (S/S By Asme-B16.5)
MIL-F-18280 - Fittings, Flareless Tube, Fluid Connection (S/S By Sae-As18280)
This specification establishes the requirements for flareless tube connection fittings, nuts and sleeves for use in fluid systems (see 6.1).
MIL-F-18287 - Fittings, Hose End, Detachable (For Self Sealing Fuel Hose)
MIL-F-18866 - Fitting, Hydraulic Tube, Flared, 37 Degree And Flareless, Steel (Use Sae-J514)
This specification covers 37 degree flared and flareless steel tube fittings, 1500 and 3000 pounds per square inch (psi) maximum design pressure, -65 Deg to 250 Deg Fahrenheit temperature range, for use in hydraulic or air systems.
MIL-F-19488 - Fittings, Hose, Water, And Steam (Other Than Flexible, Metallic) (S/S By Ww-C-621, Mil-C-52404 And Mil-S-12165)
This specification covers hose fittings for attaching to various hoses.
MIL-F-19607 - Fitting, Hose, Reusable, Medium And High Pressure (Use Mil-H-24135)
MIL-F-20236 - Fittings, Tube And Pipe, Butt Welding, 300 Ps1 And 775 Deg F Maximum (S/S By Ansi/Asme-B16.9)
MIL-F-20668 - Flange, Iron (Malleable)
MIL-F-20670 - Flanges, Pipe, Carbon Steel, 150 P.S.I., W.S.P. (For Naval Shipboard Use)(No S/S Document)
This specification covers carbon steel pipe flanges, 150 pounds per square inch (P.S.I.), W.S.P.
MIL-F-20672 - Fitting, Pipe, Aluminum Alloy (Threaded) 125 Pound
MIL-F-21467 - Fittings, Flareless, Fluid Connection (Shipboard Use) (S/S By Mil-F-18866)
MIL-F-24202 - Fitting, Butt Welding, Seamless Or Welded, 70-30 Copper-Nickel Alloy 700 Psi, 200 Degrees Fahrenheit
This specification covers 70-30 copper-nickel alloy seamless or welded butt-welding fittings in sizes 1/2 inch up to and including 16 inch iron pipe size (i.p.s.).
MIL-F-24227 - Fittings And Flanges, Cast Bronze, Silver, Brazing Suitable For Ultrasonic Inspection
This specification covers tube fittings and flanges of cast bronze with ends for silver-brazing into a piping system, suitable for ultrasonic inspection.
MIL-F-24787 - Fittings, End, Reusable For Flexible Hose Assemblies, General Specification For
This specification covers the requirements for reusable end fittings, elbow (90 Degrees) fittings and 180 Degrees return fittings for use with flexible rubber hose in low, medium and high pressure shipboard piping systems.
MIL-F-24787/1 - Fittings, End, Type F, Fl And Ffl, Flange, Reusable For Flexible Hose Assemblies
This specification covers reusable flanged end fittings for use with wire or synthetic fiber reinforced rubber hose.
MIL-F-24787/2 - Fittings, End, Type A, 37 Degrees Flare, Reusable For Flexible Hose Assemblies
This specification covers reusable SAE 37 degrees flare end fittings for use with wire or synthetic fiber reinforced rubber hose.
MIL-F-24787/3 - Fittings, End, Types C And Cl, O-Ring Seal Union, Reusable For Flexible Hose Assemblies
This specification covers reusable O-ring seal union end fittings for use with wire or synthetic fiber reinforced rubber hose.
MIL-F-24787/4 - Fittings, End, Types E And El, Split Clamp, Reusable, With Types Sc (Split Clamp), Tf Tailpiece Female And Tm Tailpiece Male For Flexible Hose Assemblies
This specification covers reusable split clamp end fittings, and adapters for use with wire or synthetic fiber reinforced rubber hose.
MIL-F-24787/5 - Fittings, End, Type D, Hose To Hose 90 Degrees Elbow, Reusable For Flexible Hose Assemblies
This specification covers reusable hose to hose 90 degrees elbow fittings for use with wire or synthetic fiber reinforced rubber hose.
MIL-F-24787/6 - Fittings, End, Type U, 180 Degrees, Return, Hose To Hose, Reusable For Flexible Hose Assemblies
This specification covers reusable 180 degrees return fittings for use with wire or synthetic fiber reinforced rubber hose.
MIL-F-24787/7 - Fittings, End, Types B And Bl, Gasket Seal Union, Reusable For Flexible Hose Assemblies
This specification covers reusable gasket seal union end fittings for use with wire or synthetic fiber reinforced rubber hose.
MIL-F-27417 - Fitting, Rocket Engine, Fluid Connection
MIL-F-2808 - Fitting, Air Hose, Salvage, 1 1/4 Inch
MIL-F-2864 - Floater, Hose, Nonmetallic
MIL-F-3268 - Fittings; Pipe, Steel, Special (For Tanker Unloading Installations) (S/S By A-A-50581)
This specification covers special fabricated steel pipe spool pieces and 90-degree elbows for use in tanker unloading operations.
MIL-F-3541 - Fittings, Lubrication, General Specification For (S/S By Sae-As35411)
This specification covers threaded lubrication fittings to be used for admitting and retaining lubricants supplied by pressure lubricating equipment.
MIL-F-45911 - Fittings, Automotive Tube, Spherical Sleeve (Compression) Type, Brass (See Notice 1 For Replacement Information)
MIL-F-45968 - Fittings, Automotive Tube, Brass, Inverted Flare (With Steel Nut) (See Notice 1 For Replacement Information)
MIL-F-52525/18 - Fitting, Wire Reinforced Hydraulic Hose And Clamp Halves: Adapter, Tube To Hose, Field Attachable (Reusable), 37 Degrees Flare Female Swivel To Screw On, Straight, Type E, For Use With Type 100Rx 4-Spiral-Light-Wire Reinforce Hose
MIL-F-52525/19 - Fittings, Wire Reinforced Hydraulic Hose And Clam-Halves: Field Attachable (Reusable), Clamp-On To 4-Bolt Split-Flange, Straight, Type A, Adapter, For Use With Type 100R1 Single Wire Braid Hose
MIL-F-52525/20 - Fittings, Wire Reinforced Hydraulic Hose And Clamp-Halves: Field Attachable (Reusable), Clamp-On To 4-Bolt Split-Flange, 45 Degrees, Bent Tube, Type A, Elbow, For Use With Type 100R1 Single Wire Braid Hose
MIL-F-52525/21 - Fittings, Wire Reinforced Hydraulic Hose And Clamp-Halves: Field Attachable (Reusable), Clamp-On To 4-Bolt Split-Flange, 90 Degrees, Shore Drop, Type A, Elbow, For Use With Type 100R1 Single Wire Braid Hose
MIL-F-52525/22 - Fittings, Wire Reinforced Hydraulic Hose And Clamp-Halves: Field Attachable (Reusable), Clamp-On To 4-Bolt Split-Flange, 90 Degrees Bent Tube, Long Drop, Type A, Elbow, For Use With Type 100R1 Single Wire Braid Hose
MIL-F-52525/26 - Fittings, Wire Reinforced Hydraulic Hose And Clamp-Halves: Field Attachable (Reusable), Clamp-On To 4-Bolt Split-Flange, 90 Degrees Bent Tube, Long Drop, Type C, Elbow, For Use With Type 100R10 4-Spiral Wrap Hose
MIL-F-52525/27 - Fittings, Wire Reinforced Hydraulic Hose And Clamp-Halves: Field Attachable (Reusable), Clamp-On To 4-Bolt Split-Flange, Straight, Type B, Adapter, For Use With Type 100R2 Double Wire Braid Hose (S/S By Mil-F-52525/10 Now Mil-Dtl-52525/10)
MIL-F-52525/28 - Fittings, Wire Reinforced Hydraulic Hose And Clamp-Halves: Field Attachable (Reusable), Clamp-On To 4-Bolt Split-Flange, 45 Degrees Bent Tube Type B, Elbow, For Use With Type 100R2 Double Wire Braid Hose (S/S By Mil-F-52525/11 Now Mil-Dtl-52525/11)
MIL-F-52525/29 - Fittings, Wire Reinforced Hydraulic Hose And Clamp-Halves: Field Attachable (Reuseable), Clamp-On To 4-Bolt Split-Flange, 90 Degrees Bent Tube, Short Drop, Type B, Elbow, For Use With Type 100R2 Double Braid Hose (S/S By Mil-F-52525/12)
MIL-F-52525/30 - Fittings, Wire Reinforced Hydraulic Hose And Clamp-Halves: Field Attachable (Reusable), Clamp-On To 4-Bolt Split-Flange, 90 Degrees, Bent Tube, Long Drop, Type B, Elbow, For Use With Type 100R2 Double Braid Hose
MIL-F-5506 - Fitting, Method Of Testing Tube
MIL-F-5509 - Fitting, Flared Tube, Fluid Connection (See Notice 2 For Additional Superseding Information)
This specification establishes the requirements for flared tube, pipe threaded and beaded type fluid connection fittings for use in all types of fluid systems. (see 6.1)
MIL-F-83798/10 - Fitting, Rubber Hose, Lightweight, Medium Pressure (Nipple Subassembly, Flared, Swivel Nut, Straight)
MIL-F-83798/11 - Fitting, Rubber Hose, Lightweight, Medium Pressure, (Nipple Subassembly, Flared, Swivel Nut, 45 Degrees)
MIL-F-83798/12 - Fitting, Rubber Hose, Lightweight, Medium Pressure (Nipple Subassembly, Flareless, Swivel Nut, 90 Degrees)
MIL-F-83798/13 - Fitting, Rubber Hose, Lightweight, Medium Pressure (Nipple Subassembly, Flareless, Swivel Nut, Straight)
MIL-F-83798/14 - Fitting, Rubber Hose, Lightweight, Medium Pressure, (Nipple Subassembly, Flareless Swivel Nut, 45 Degrees)
MIL-F-83798/15 - Fitting, Rubber Hose, Lightweight, Medium Pressure, (Nipple Subassembly, Swivel Nut, 90 Degrees)
MIL-F-83798/16 - Fitting, Rubber Hose, Lightweight, Medium Pressure (Nipple Subassembly, Swivel Flange Straight)
MIL-F-83798/17 - Fitting, Rubber Hose, Lightweight, Medium Pressure, (Nipple Subassembly, Swivel Flange, 45 Degrees)
MIL-F-83798/18 - Fitting, Rubber Hose, Lightweight, Medium Pressure, (Nipple Subassembly, Swivel Flange, 90 Degrees)
MIL-F-83798/19 - Fitting, Rubber Hose, Lightweight, Medium Pressure, (Nipple, Flared, Swivel Nut, Straight)
MIL-F-83798/20 - Fitting, Rubber Hose, Lightweight, Medium Pressure, (Nipple, Flared, Swivel Nut, 45 Degrees)
MIL-F-83798/21 - Fitting, Rubber Hose, Lightweight, Medium Pressure, (Nipple, Flared, Swivel Nut, 90 Degrees)
MIL-F-83798/22 - Fitting, Rubber Hose, Lightweight, Medium Pressure, (Nipple Flareless, Swivel Nut, Straight)
MIL-F-83798/23 - Fitting, Rubber Hose, Lightweight, Medium Pressure, (Nipple, Flared, Swivel Nut, 45 Degrees)
MIL-F-83798/24 - Fitting, Rubber Hose, Lightweight, Medium Pressure, (Nipple, Flareless, Swivel Nut, 90 Degrees)
MIL-F-83798/25 - Fitting, Rubber Hose, Lightweight, Medium Pressure, (Nipple, Swivel Flange, Straight)
MIL-F-83798/26 - Fitting, Rubber Hose, Lightweight, Medium Pressure, (Nipple, Swivel Flange, 45 Degrees)
MIL-F-83798/27 - Fitting, Rubber Hose, Lightweight, Medium Pressure, (Nipple, Swivel Flange, 90 Degrees)
MIL-F-83798/28 - Fitting, Rubber Hose, Lightweight, Medium Pressure, (Socket)
MIL-F-83798/29 - Fitting, Rubber Hose, Lightweight, Medium Pressure, (Sleeve Insert)
MIL-F-85421 - Fittings, Tube, Fluid Systems, Separable, Beam Seal, 3000/4000 Psi, General Specification For (S/S By Sae-As85421)
This specification covers the design requirements and test procedures for separable beam seal fittings which includes end fittings, fitting bodies, and boss fittings for use in aerospace fluid systems.
MIL-F-85421/10 - Fitting, Adapter, Beam Seal, 3000/4000 Psi, Male To Flareless (S/S By Sae-As85421/10)
MIL-F-85421/11 - Fitting, Union, Beam Seal, 3000/4000 Psi, Male Ends (S/S By Sae-As85421/11)
MIL-F-85421/12 - Fitting, Elbow, 90 Deg., Beam Seal, 3000/4000 Psi, Male To Male (S/S By Sae-As85421/12)
MIL-F-85421/13 - Fitting, Elbow, 90 Deg., Beam Seal, 3000/4000 Psi, Bulkhead, Male Ends (S/S By Sae-As85421/13)
MIL-F-85421/14 - Fitting, Elbow, 90 Deg., Beam Seal, 3000/4000 Psi, Male To Female (S/S By Sae-As85421/14)
MIL-F-85421/15 - Fitting, Elbow, 45 Deg., Beam Seal, 3000/4000 Psi, Bulkhead, Male Ends (S/S By Sae-As85421/15)
MIL-F-85421/16 - Fitting, Tee, Beam Seal, 3000/4000 Psi, Bulkhead On Run, Male Ends (S/S By Sae-As85421/16)
MIL-F-85421/17 - Fitting, Tee, Beam Seal, 3000/4000 Psi, Bulkhead On Branch, Male Ends (S/S By Sae-As85421/17)
MIL-F-85421/3 - Fitting, Tee, Reducer, Beam Seal, 3000/4000 Psi, 3 Male Ends (S/S By Sae-As85421/3)
MIL-F-85421/4 - Fitting, Tee, Reducer And Non-Reducer, Beam Seal, 3000/4000 Psi, Male On Run, Swivel Nut On Branch (S/S By Sae-As85421/4)
MIL-F-85421/5 - Fitting, Tee, Reducer And Non-Reducer, Beam Seal, 3000/4000 Psi, Male On Run And Branch, Swivel Nut On Run (S/S By Sae-As85421/5)
MIL-F-85720 - Fitting, Tube, Fluid Systems, Separable, High Pressure, Dynamic Beam Seal, General Specification For (S/S By Sae-As85720)
MIL-F-85720/1 - Fittings, Tube, Fluid Systems, Separable, High Pressure, Dynamic Beam Seal, Design Standard For Male End (S/S By Sae-As85720/1)
MIL-F-8839 - Fittings, Lubrication Drive Type
This specification covers drive-type lubrication fittings for maintenance use only and is not intended for new design.
MIL-G-15383 - Guns, Lubricating, Pressure, Hand-Operated, And Fittings (Shipboard Use) (S/S By Mil-F-3541)
MIL-H-62165/3 - Hose Fittings, Reusable, For Non Metallic Thermoplastic Hose
MIL-I-24063 - Insert Sets, Sound Isolation For Risic Risic-1 Flexible Connectors
This specification covers elastomeric inserts used with rubber insert sound isolation coupling (RISIC-1) flexible connectors.
MIL-I-24783 - Isolator, Ring Type, Pressure, For Shipboard Sewage Service
This specification covers the requirements for ring and flanged spool type isolators, installed between pipe flanges, to isolate pressure and vacuum gauges from clogging by sediment and solids in shipboard sewage systems.
MIL-J-26870 - Joint, Swivel, Aircraft Fuel
This specification covers aircraft fuel swivel joints.
MIL-J-2948 - Joint, Steel, Flexible (For Temporary Pipe Connections
MIL-M-11726 - Manifold, Air Line; One To Seven Outlets
MIL-M-27386 - Manifold Assemblies, Hose-Line: Fueling: 4-Inch, Quick-Coupling Type
MIL-M-28608 - Mender, Hose
MIL-M-52107 - Manifold, Fuel, Bulk Transfer, Quick Disconnect Cam-Locking Connections (Use Mil-M-82002)
MIL-N-17752 - Nozzle, Spray, Water Cooling
MIL-N-22602 - Nozzle, Abrasive Blast, Venturi Type
This specification covers abrasive blast nozzles of the venturi type.
MIL-N-25087 - Nipple, Emergency Oxygen Cylinder Valve, Breakoff (S/S By Mil-V-7560)
MIL-N-25556 - Nozzle, Fill And Vent, Fuming Nitric Acid Servicing
MIL-N-7364 - Nozzle, Oil Servicing, Pistol Grip, Non Drip, Type A&3A
MIL-P-10388 - Pipe Fittings: One Or More Ends Grooved (S/S By A-A-52592)
This specification covers grooved - and combination - type pipe fittings.
MIL-P-14351 - Pipeline Barrel, Cleaner Trap: Incoming And Outgoing
MIL-P-15742 - Plug, Plastic (Heat-Exchanger Tube) (S/S By A-A-59949)
This specification covers heat-exchanger-tube plugs which are driven into both ends of leaking condenser or other heat-exchanger-tubes to prevent contamination of the fluid surrounding the tubes.
MIL-P-18174 - Pipe Fitting, Steel, Threaded 2000, 3000, & 6000 Pound, Wog Use Ansi B16.11
MIL-P-18178 - Pipe Bends, Fabricated (For Shore Use)
MIL-P-18501 - Pipe And Fittings, Steel, Lightweight, Spiral And Longitudinal Welded Seam
MIL-P-18901 - Plug, Protective And Preservative, Plastic (For Internal Threads)
MIL-P-22011 - Pipe Fitting, Plastic, Rigid, Unplasticized, High Impact, Polyvinylchloride
MIL-P-54001 - Plug, Pipe, Magnetic, Headless, Iron, Steel Or Aluminum Alloy (S/S By A-A-59432)
MIL-PRF-12386 - Clamp, Repair, Pipe: With Fuel-Resistant Gasket
This specification covers two types of clamps one for split application and the other for pinhole application over damaged petroleum pipelines.
MIL-PRF-13789 - Strainers, Sediment: Pipeline, Basket Type
This specification covers single element basket-type sediment strainers from 0.75 to 12.00-inch nominal pipe size, for the removal of foreign material from fuel and oil service lines.
MIL-PRF-20042 - Flange, Pipe , Bronze (Silver Brazing)
This specification covers 50, 100, 150, 250, and 400 pound silver brazing bronze pipe flanges for use with water, oil, gas, or steam service not to exceed 425 degrees Fahrenheit ( F).
MIL-PRF-25676 - Adapter, Pressure Lubricating Oil Servicing, Aircraft (S/S By Mil-Dtl-25677)
This specification covers an adapter installed in an aircraft turbine engine lubricating oil system as a connection for ground servicing with pressure lubricating oil servicing equipment, using synthetic lubricating and preservative oil.
MIL-R-11521 - Ring, Expansion, Hose, Brass (S/S By A-A-55535)
MIL-R-17882 - Repair Kits, Metallic Pipe And General Purpose, Damage Control
This specification covers repair kits for metallic pipe and general purpose damage control use.
MIL-S-10385 - Sandtrap Assembly (For Portable 6-Inch Petroleum Pipeline)
This specification covers a sandtrap assembly for use in portable pipeline pumping station manifolds.
MIL-S-12165 - Strainer, Suction, Fire Hose, And Strainers, Suction, Hose
This specification covers firehose and water hose strainers to be attached to the intake end of a suction hose.
MIL-S-15573 - Strainers, Sediment, Pipeline (For Gasoline Service)
MIL-S-16293 - Strainers, Sediment: Pipeline, Water, Air, Gas, Oil Or Steam (S/S By Ww-S-2739)
This specification covers removable basket-and-screen-strainers of various sizes for use in water, air, gas, oil, or steam pipe lines, as specified (see 6.2 and 6.4), to remove dirt, scale particles, and other foreign matter.
MIL-S-17635 - Separators And Purifiers, Steam, Pipeline And Receiver
MIL-S-17849 - Strainers, Sediment, Pipeline, Duplex (With And Without Magnet)
This specification covers duplex strainers for use in lubricating, diesel, fuel oil and sea water cooling systems.
MIL-S-19901 - Spool Pieces (For Submarine Fuel Loading Line)
MIL-S-21427 - Strainer, Assemblies, Main Steam, High Pressure (Sizes 4 Inches And Above)
This specification covers high pressure steam strainer assemblies in sizes 4 inches and above intended primarily for main steam systems, for protection of power equipment and throttle valves from dirt, sediment, pipe scale and foreign objects.
MIL-S-22833 - Strainers, Sediment, Refrigerant 12
This specification covers noncleanable, screen-type, straight-through strainers for use with refrigerant 12 (dichlorodifluoromethane).
MIL-S-27661 - Strainer, Sediment, Jet Fuel Unit, 600 Gpm
MIL-S-28678 - Strainer, Steam, Bronze Body, 250 Psi, Silver Brazed Socket Connection (See Notice 1 For Replacement Information)
MIL-S-2953 - Strainers, Steam (Sizes 3 Inches And Below)
This specification covers basket-type steam strainers in sizes 3 inch and below.
MIL-S-416 - Strainer, Well, Water, Wire-Wound
This specification covers 10-foot long, wire-wound, telescopic type strainers used in connection with water-well construction.
MIL-STD-1330 - Precision Cleaning And Testing Of Shipboard Oxygen, Helium, Helium-Oxygen, Nitrogen, And Hydrogen Systems
This standard provides the requirements for precision cleaning and testing of oxygen or oxygen-enriched systems and components; oxygen generating plants including nitrogen, hydrogen, and demineralized water support systems and components; and helium, helium-oxygen, and hydrogen life support systems and components. Each activity will implement the applicable requirements of this document through a locally prepared and approved procedure. Activities subject to additional quality assurance requirements such as NAVSEA SS800-AG-MAN-010/P-9290 or NAVSEA SS521-AA-MAN-010 will obtain procedure approval from the applicable certifying activity.
MIL-STD-1330-SUP-2 - Precision Cleaning and Testing of Shipboard Oxygen, Helium, Helium-Oxygen, Nitrogen, and Hydrogen Systems
This standard provides the requirements for precision cleaning and testing of oxygen or oxygen-enriched systems and components; oxygen generating plants including nitrogen, hydrogen, and demineralized water support systems and components; and helium, helium-oxygen, and hydrogen life support systems and components. Each activity will implement the applicable requirements of this document through a locally prepared and approved procedure. Activities subject to additional quality assurance requirements such as NAVSEA SS800-AG-MAN-010/P-9290 or NAVSEA SS521-AA-MAN-010 will obtain procedure approval from the applicable certifying activity.
MIL-STD-1514 - Fittings, Tetrafluoroethylene Hose High Temperature, High Pressure (3000 Psi) Hydraulic And Pneumatic Classification Of Defects
This standard covers the classification of defects for fittings covered by MIL-F-83296.
MIL-STD-1655 - Fittings, Flareless, Classification Of Defects Of (S/S By Mil-Hdbk-1655)
This standard establishes a classification of commonly occurring defects applicable to the flareless fitting drawings specified in MIL-F-18280.
MIL-STD-419 - Cleaning, Protecting, And Testing Piping, Tubing, And Fittings For Hydraulic Power Transmission Equipment
This standard covers the requirements governing the basic methods of cleaning and protecting nonferrous and ferrous metal and alloyed pipe, tubing, and fittings prior to installation and after hydraulic tests in hydraulic power transmission applications. This standard is applicable to hydraulic components used in systems filled with either petroleum oil, synthetic poly-alpha-olephin (PAO) fluid, phosphate ester type fluid, or water based fluid.
MIL-STD-438 - Schedule Of Piping, Valves, Fittings, & Associated Piping Components For Submarines Service
MIL-STD-777 - Schedule Of Piping, Valves, Fittings, And Associated Piping Components For Naval Surface Ships
This standard covers requirements for basic piping system components on Navy surface ships. It is not the intention herein to include every conceivable component, valve, or fitting that might be used in the piping system of a surface ship. The requirements invoked herein are not desirable goals but are minimum acceptable standards.
MIL-STD-845 - Fitting, Tetrafluoroethylene Hose High Temperature, Medium Pressure Classification Of Defects
This standard covers the classification of defects for fittings covered by MIL-P-27272.
MIL-T-18112 - Traps, Steam, Bucket, Float, Impulse And Return, And Air Vents, Float And Thermostatic (Use Ww-T-696)
MIL-T-21092 - Trap, Air And Water, Ball Float (150 Psig Working Pressure) (S/S By Ww-T-696)
This specification covers a single type of cylindrical, elliptical, or ball float trap.
MIL-T-2118 - Trap, Steam, Angle, Thermostatic
This specification covers the requirements for thermostatic steam traps for services up to 100 pounds per square inch (lb/in)
MIL-T-22064 - Towing Assembly, Helicopter (Load Measuring And Release System For Towing By Helicopter)
MIL-T-960 - Traps, Steam, Intermittent Discharge And Continuous Flow, Naval Shipboard
This specification covers steam traps for use in draining condensate from steam systems.
MIL-U-18181 - Union, Pipe, Flanged, Iron (125, 250, And 300 Psi Working Steam Pressure)
MIL-U-18183 - Union, Pipe, Flanged, Steel
MIL-U-18249 - Unions, Pipe, Bronze Or Naval Brass, Threaded Pipe Connection, 250-Pounds Wsp (Navy )Use Ww-U-516(
MIL-U-18250 - Union, Pipe, Steel Or Malleable Iron, Threaded Pipe Connections, 300 Pound Wp (S/S By Ansi B16.39)
MIL-V-23219 - Valve Manifolds, High Pressure Air Reducing
This specification covers the design, construction, test and operating requirements for high pressure air reducing valve manifolds for the ASROC launcher.
MS14303 - Pipe Fittings, Steel, Threaded, Pressure Class 2000, 3000, And 6000 Pound Wog
MS14304 - Coupling, Caps, Plugs, & Bushings, Pipe Threaded, Pressure Class 3000 & 6000
MS14305 - Fittings, Pipe, Brass Or Bronze, Threaded (Tees, Crosses, 45-Degrees Elbows, And Couplings), Class 125
MS14306 - Fittings, Pipe, Brass Or Bronze, Threaded (Reducers, Close And Open Return Bends, And 45-Degrees Y-Branches), Class 125
MS14307 - Elbows, Pipe, Brass Or Bronze, Threaded, 45-Degrees, Street, Class 125
MS14308 - Elbows, Pipe, Brass Or Bronze, Threaded, 90-Degrees, Reducing, Class 125
MS14309 - Tees, Pipe, Brass Or Bronze, Threaded, Reducing, Class 125
MS14310 - Caps, Pipe, Brass Or Bronze, Threaded, Class 125
MS14311 - Fittings, Pipe, Brass Or Bronze, Threaded (90-Degrees Elbows, Tees, Crosses, 45-Degrees Elbows, And Coupling), Class 250
MS14312 - Elbows, Pipe, Brass Or Bronze, Threaded, 90-Degrees, Reducing, Class 250
MS14313 - Tees, Pipe, Brass Or Bronze, Threaded, Reducing, Class 250
MS14314 - Plugs, Pipe, Brass Or Bronze, Threaded (Square Head And Square Socket), Classes 250 And 125
MS14315 - Bushings, Pipe, Brass Or Bronze, Threaded (Outside Head, Inside Head, And Face) Class 250
MS15000 - Fittings, Lubrication-Hydraulic, Acceptable Tip Designs (S/S By Sae-As15000)
MS15001 - Fittings, Lubrication (Hydraulic) Surface Check, 1/4-28 Taper Threads, Steel, Type I (S/S By Sae-As15001)
MS15002 - Fittings, Lubrication (Hydraulic) Surface Check, Straight Threads, Steel, Type Ii (S/S By Sae-As15002)
MS15003 - Fittings, Lubrication (Hydraulic) Surface Check, 1/8 Pipe Threads, Steel Type Iii (S/S By Sae-As15003)
MS15004 - Fittings, Lubrication (Hydraulic) Surface Check, 1/4-28 Taper Threads, Nickel-Copper Alloy, Type Iv (S/S By Sae-As15004)
MS15005 - Fittings, Lubrication, Throat Or Surface Check, 1/8 Pipe Threads, Nickel-Copper Alloy, Type V (S/S By Sae-As15005)
MS15006 - Fittings, Lubrication (Hydraulic) Leakproof, 1/8 Pipe Threads, Steel, Type Vi (S/S By Sae-As15006)
MS15011 - Fittings, Hose, Welding And Cutting, Oxygen Andacetylene (S/S By Cga-E1)
MS15182 - Nut, Coupling (For Pressed Metal Lavatory)
MS15720 - Fittings, Lubrication (Hydraulic) Throat Or Surface Check, 1/4-28 Taper Threads, Corrosion Resistant Steel, Type Vii (S/S By Sae-As15720)
MS15721 - Fitting, Lubrication (Hydraulic) Throat Or Surface Check, 1/8 Pipe Threads, Corrosion Resistant Steel, Type Viii (S/S By Sae-As15721)
MS16051 - Coupling, Ground Cooling, Combat Type Aircraft
MS16142 - Boss, Gasket Seal Straight Thread Tube Fitting, Standard Dimensions For (S/S By Sae-J1926/1 And Iso725)
MS16267 - Elbows, Tube, 90 Degree, Flareless Typestraight Thread (See Mil-F-21467)
MS16722 - Boss, Pipe
MS17242 - Strainer, Sediment Refrigerant-12
MS17319 - Bushing - Screw, Plain (Mil-S-8879 Thread)
MS17833 - Connector, Pneumatic Starter Duct, Flanged, Male
MS17834 - Adapter, Pneumatic Starter Duct Nipple And Flange, Male
MS17835 - Connector, Pneumatic Starter Duct, Flange, Female
MS17836 - Connector, Pneumatic Starter, Duct, Double Ended
MS18039 - Adapter - For Connection Of Coupling Per Mil-C-25531B (Asg) To Class Ii End Fitting Per Mil-C-25531 (Asg)
MS18040 - Adapter - For Connection Of Coupling Per Mil-C-25531 To Ms17833
MS18073 - Elbow, 90 Deg. Swivel Flange, Hose Fitting Ams 5639 Cres Steel
MS18074 - Elbow, 45 Deg. Swivel Flange, Hose Fitting Ams 5639 Cres Steel
MS18075 - Nipple, Swivel Flange, Hose Fitting Ams 5639 Cres Steel
MS18076 - Flange, Swivel, Hose Fitting Ams 5639 Cres Steel
MS18077 - Elbow, 90 Deg. Swivel Nut, Hose Fitting Ams 5639 Cres Steel
MS18078 - Elbow, 45 Deg.Swivel Nut, Hose Fitting Ams 5639 Cres Steel
MS18079 - Nut, Wire Retained, Swivel Safety Wire Holes, Hose Fitting Ams 5639 Cres Steel
MS18080 - Nut, Wire Retained, Swivel, Safety Wire Holes Hose Fitting Ams 5639 Cres Steel
MS18081 - Nipple, Hose Fitting Ams 5639 Cres Steel
MS18082 - Socket, Hose Fitting, Ams 5639 Cres Steel
MS18083 - Wire, Retaining, Swivel Nut, Ams5637
MS18084 - Design Standard For Assembly Of Tetrafluoroethylene Hose Fittings
MS18085 - Fitting End-Tetrafluoroethylene Hose, Medium Pressure, Swivel Nut, Corrosion Resistant Steel
MS18086 - Fitting End-Tetrafluoroethylene Hose, Medium Pressure, 45 Deg. Swivel Nut, Corrosion Resistant Steel
MS18087 - Fitting End-Tetrafluoroethylene Hose, Medium Pressure, 90 Deg. Swivel Nut, Corrosion Resistant Steel
MS18088 - Fitting End- Tetrafluoroethylene Hose Medium Pressure, Swivel Flange Corrosion Resistant Steel
MS18089 - Fitting End-Tetrafluoroethylene Hose, Medium Pressure, 45 Deg. Swivel Flange, Corrosion Resistant Steel
MS18090 - Fitting End-Tetrafluoroethylene Hose, Medium Pressure, 90 Deg. Swivel Flange, Corrosion Resistant Steel
MS18229 - Plug For O Ring Gasket
MS18285 - Flexibility And Stress Intensification Factors (S/S By Ansi-B31.1)
MS18301 - High Pressure Drain Orifice Plates And Strainers
MS18307 - Laterals, Forged Steel Socket Welding 3000 Psi At 1000 Degree F (Max.) Steam Service
MS18308 - Alloy Steel Socket Welding Flanges And Flanged Nipples, 1/4 Inch And 3/8 Inch, 600 Pounds Per Square Inch At 850 Degrees F (Maximum)
MS20756 - Flange, Swivel, Retaining
MS20757 - Connector, Fixed Flange, To Hose
MS20758 - Elbow, Hose, Flanged, Swivel, 45 Degree
MS20759 - Elbow, Hose, Flanged Swivel, 90 Degrees
MS20760 - Adapter, Straight, Flange To Tube
MS20761 - Elbow, Flared Tube, Flanged, Swivel, 45 Degrees
MS20762 - Elbow, Flared Tube, Flanged, Swivel, 90 Degrees
MS20819 - Sleeve, Flared Tube Fitting (See Notice 3 For Replacement Information)
MS20822 - Elbow, Flared Tube & Pipe Threads, 90 Deg. (S/S By Sae-As5195)
MS20823 - Elbow, 45 Deg. Pipe To Flared (S/S By Sae-As5196)
MS20825 - Tee, Pipe To Tube, Pipe Thread On Side (S/S By Sae-As5197)
MS20826 - Tee, Pipe To Tube, Pipe Thread On Run (S/S By Sae-As5198)
MS20913 - Plug, Pipe (S/S By Sae-As4863)
MS21336 - Plugs, Pipe, Iron Or Steel.
MS21337 - Plugs, Pipe, Aluminum.
MS21338 - Plugs, Pipe, Magnetic, Aluminum.
MS21339 - Plugs, Pipe, Magnetic, Iron Or Steel.
MS21343 - Boss Spacing-Hydraulic Design Standard For
MS21344 - Fitting - Installation Of Flared Tube, Straight Threaded Connectors, Design Standard For
MS21345 - Fitting, Installation Of Universal Elbow
MS21900 - Adapter, Flareless Tube To A Flared Tube (S/S By Sae-As21900)
MS21901 - Adapter, Flareless Tube For 3/8 Bulkhead And Universal To An Flared Tube (S/S By Ms21923)
MS21902 - Union, Flareless Tube (S/S By Sae-As21902)
MS21903 - Union, Flareless Tube, 3/8 Bulkhead And Universal (S/S By Sae-As21924)
MS21904 - Elbow, Flareless Tube, 90 Deg. (S/S By Sae-As21904)
MS21905 - Tee, Flareless Tube (S/S By Sae-As21905)
MS21906 - Cross, Flareless Tube (S/S By Sae-As21906)
MS21907 - Elbow, Bulkhead Universal, 45 Deg., Flareless Tube (S/S By Sae-As21907)
MS21908 - Elbow, Bulkhead Universal 90 Deg., Flareless Tube (S/S By Sae-As21908)
MS21909 - Tee, Bulkhead And Universal, Flareless Tube (S/S By Sae-As21909)
MS21910 - Tee, Bulkhead, Flareless Tube, Internal Thread On Side (S/S By Sae-As21910)
MS21911 - Tee, Bulkhead, Flareless Tube, Internal Thread On Run (S/S By Sae-As21911)
MS21912 - Tee, Flareless Tube With Bulkhead On Run (S/S By Sae-As21912)
MS21913 - Plug, Flareless Tube (S/S By Sae-As21913)
MS21914 - Cap, Pressure Seal, Flareless Tube Fitting (S/S By Sae-As21914)
MS21915 - Adapter, Straight, Tube To Boss (S/S By Sae-As21915)
MS21916 - Reducer, External Thread, Flareless Tube (S/S By Sae-As21916)
MS21917 - Nut, Sleeve Coupling, Flareless H
MS21918 - Sleeve - Coupling, Flareless
MS21920 - Clamp, Hose (Flat Band, 500 Deg. F) (S/S By Mil-Dtl-8783/1)
MS21921 - Nut, Sleeve Coupling, Flareless (S/S By Sae-As21921)
MS21922 - Sleeve, Coupling, Flareless (S/S By Sae-As21922)
MS21923 - Adapter, Flareless Tube, Bulkhead And Universal To Flared Tube (S/S By Sae-As21923)
MS21924 - Union, Flareless Tube, Bulkhead And Universal (S/S By Sae-As21924)
MS21925 - Elbow, 90 Degree Universal, Flareless Tube, High Profile (Asg) (S/S By Sae-As21925)
MS21926 - Elbow, 90 Deg. Universal, Flareless Tube, Low Profile (S/S By Sae-As21926)
MS21932 - Fitting End, Bolt Cluster Fitting, Single Port
MS21933 - Fitting End, Bolt Cluster Fitting, Single Port Through, Flareless
MS21934 - Fitting End, Bolt Cluster Fitting, Double Port
MS21935 - Fitting End, Bolt Cluster Fitting, Double Port, Through, Flareless (S/S By Sae-As21935)
MS21936 - Contour And Mounting End, Cluster Fitting Body, Semifinished (S/S By Sae-As21936)
MS21937 - Nut, Cluster Fitting, Retainer (Asg) (S/S By Sae-As21937)
MS21938 - Bolt, Cluster Fitting, Single Port Flareless (S/S By Sae-As21938)
MS21939 - Bolt, Cluster Fitting, Single Port, Through, Flareless (S/S By Sae-As21939)
MS21940 - Bolt, Cluster Fitting, Double Port, Flareless (S/S By Sae-As21940)
MS21941 - Bolt, Cluster Fitting, Double Port, Through, Flareless (S/S By Sae-As21941)
MS21942 - Body, Cluster Fitting, One Way, Flareless (S/S By Sae-As21942)
MS21943 - Body, Cluster Fitting, Two Way, 90 Deg., Flareless (S/S By Sae-As21943)
MS21944 - Body, Cluster Fitting, Two Way, 180 Deg., Flareless (S/S By Sae-As21944)
MS21945 - Body, Cluster Fitting, Three-Way, Flareless (S/S By Sae-As21945)
MS21946 - Body, Cluster Fitting, One-Way, Internal Boss
MS21947 - Fitting End, Bolt Cluster Fitting Single Port Through, Flare
MS21948 - Fitting End, Bolt Cluster Fitting Double Port Through, Flare
MS21949 - Bolt-Cluster Fitting, Single Port-Flare
MS21950 - Bolt, Cluster Fitting Single Port Through-Flare
MS21951 - Bolt-Cluster Fitting Double Port-Flare
MS21952 - Bolt, Cluster Double Port Through, Flare
MS21953 - Body, Cluster Fitting One -Way, Flare
MS21954 - Body, Cluster Fitting, Two-Way 90 Deg., Flare
MS21955 - Body, Cluster Fitting, Two-Way 180 Deg., Flare
MS21956 - Body, Cluster Fitting Three Way, Flare
MS21957 - Coupling, Quick-Disconnect, Low-Pressure Air Connection, Bulkhead Fitting End, 1/4 Tube Size
MS21958 - Body, Cluster Fitting, Two-Way, 180 Degrees, Internal Boss
MS21959 - Body,Cluster Fitting, Two-Way, 90 Degrees, Internal Boss
MS21960 - Body, Cluster Fitting, Three-Way, Internal Boss
MS22064 - Clamp - Hose
MS24333 - Coupling Assembly, Hydraulic, Self-Sealing, Quick Disconnect, Flared Fitting To Internal Thread Boss
MS24334 - Coupling Assembly, Hydraulic, Self-Sealing, Flareless Fitting To Internal Thread Boss
MS24335 - Flange, Bulkhead Mounting, Hydraulic, Self-Sealing Coupling
MS24385 - Fitting End, Flared Tube Connection, Precision Type, Standard Dimensions (S/S By Sae-As4395)
MS24386 - Fitting End, Bulkhead Flared Tube Connection Precision Type, Standard Dimensions (S/S By Sae-As4396)
MS24387 - Bolt, Fluid Passage, Precision Type
MS24388 - Tee, Flared Tube, Internal Thread On Side, Precision Type (S/S By Sae-As1031)
MS24389 - Tee, Tube, Internal Thread On Run, Precision Type (S/S By Sae-As1032)
MS24390 - Tee, Flared Tube With Bulkhead On Run - Precision Type (S/S By Sae-As1033)
MS24391 - Plug - Bleeder, Tube Precision Type (S/S By Sae-As5169)
MS24392 - Nipple, Tube, Precision Type (See Notice 2 For Replacement Information)
MS24393 - Nipple, Tube, 3/8 Bulkhead, Precision Type (S/S By Sae-As5406)
MS24394 - Elbow, Tube, Bulkhead, 90 Deg., Precision Type (S/S By Sae-As1038)
MS24395 - Tee, Tube, Bulkhead, Precision Type (S/S By Sae-As1039)
MS24396 - Elbow, Tube, Bulkhead, 45 Degrees, Precision Type (S/S By Sae-As1040)
MS24397 - Reducer, Boss, Precision Type (S/S By Sae-As5172)
MS24398 - Adapter, Straight, Tube To Boss, Precision Type (S/S By Sae-As5173)
MS24399 - Reducer, Tube, Precision Type (See Notice 2 For Replacement Information)
MS24401 - Elbow, Tube, 90 Degrees, Precision Type (S/S By Sae-As1034)
MS24402 - Tee, Tube, Precision Type (S/S By Sae-As1035)
MS24403 - Cross, Tube, Precision Type (S/S By Sae-As1036)
MS24404 - Plug, Tube, Precision Type (S/S By Sae-As5168)
MS24405 - Adapter, Flareless Tube To Flared Tube Precision Type (S/S By Sae-As24405)
MS24475 - Nozzle, Pressure Lubricating Oil Servicing, Locking (Asg) (S/S By Mil-Dtl-25677/3)
MS24476 - Adapter, Pressure Lubricating Oil Servicing, Aircraft (S/S By Mil-Dtl-25677/1)
MS24480 - Cap - Lubrication Fitting, Protective, Pressure Servicing Adapter (S/S By Mil-Dtl-25677/2)
MS24487 - Nipple, Tube, 37 Deg To 45 Deg. Seat (S/S By Sae-As933)
MS24518 - Elbow, Pipe To Hose, 45 Degrees Low Pressure (S/S By Sae-J1231)
MS24519 - Elbow, Pipe To Hose: 90 Deg. Low Pressure (S/S By Sae-J1231)
MS24520 - Mender, Hose (Low Pressure) (S/S By A-A-52403)
MS24521 - Tee, Hose (Low Pressure) (S/S By A-A-52405)
MS24522 - Adapter, Pipe To Hose, Straight Low Pressure (S/S By Sae-J1231)
MS24529 - Cap, Lubrication Fitting, Protective
MS24587 - Adapter Assembly, Straight, Hose To Tube, Reusable, Hydraulic, Fuel And Oil Lines
MS24588 - Nipple, Adapter, Hose To Tube, Reusable, Hydraulic, Fuel And Oil Lines, 3/16 Through 3/4 Inch Tubing Sizes
MS24589 - Nipple, Adapter, Hose To Tube, Reusable, Hydraulic, Fuel And Oil Lines, 1 Through 2 Inches Tubing Sizes
MS24590 - Socket, Adapter, Hose To Tube, Reusable, Hydraulic, Fuel And Oil Lines, 3/16 Through 3/4 Inch Tubing Sizes
MS24591 - Socket, Adapter, Hose To Tube, Reusable, Hydraulic, Fuel And Oil Lines, 1 Through 2 Inches Tubing Sizes
MS24592 - Nut, Tube Coupling - Hose To Hose Reusable, Hydraulic, Pneumatic, Fuel And Oil Lines
MS24651 - Elbow, Tube-90 Deg., Bulkhead, Flareless, Tube, Universal To Flared Tube (S/S By Sae-As24651)
MS24652 - Elbow, Tube - 90 Deg., Bulkhead, Flared Tube, Universal To Flareless Tube (S/S By Sae-As24652)
MS24653 - Elbow, Tube - 45, Bulkhead, Flared Tube Universal To Flareless Tube
MS24654 - Elbow, Tube - 45 Deg., Bulkhead, Flareless Tube Universal To Flared Tube (S/S By Sae-As24654)
MS24688 - Sleeve-Retaining, Coupling, Pressure Fuel Servicing
MS25159 - Air Inlet, Axial, Generator
MS26541 - Cartridge, Corrosion Inhibitor Drain
MS26549 - Nipple, Quick Disconnect, 2-1/2 Inch, Pressure Fuel Servicing, Flange Type
MS26550 - Coupling, Quick Disconnect, 2-1/2 Inch Pressure Fuel Servicing, Nozzle To Hose
MS26552 - Nipple, Quick Disconnect, 2-1/2 Inch, Pressure Fuel Servicing, Open Flow, Wrench Type
MS26553 - Nipple, Quick Disconnect, 2-1/2 Inch Pressure Fuel Servicing With Check Valve, Wrench Type
MS27019 - Coupling Assembly, Quick Disconnect, Cam-Locking Type (S/S By A-A-59326)
MS27020 - Coupling Half, Quick Disconnect, Cam-Locking Type, Male, Internal Pipe Thread, Type I (S/S By A-A-59326/1)
MS27021 - Coupling Half, Quick Disconnect, Cam-Locking Type (S/S By A-A-59326/2)
MS27022 - Coupling Half, Quick Disconnect Cam-Locking Type, Male External Pipe Thread, Type Iii (S/S By A-A-59326/3)
MS27023 - Coupling Half, Quick Disconnect, Cam-Locking Type, Male, Flanged, Type Iv (S/S By A-A-59326/4)
MS27024 - Coupling Half, Quick Disconnect, Cam-Locking Type, Female, Internal Pipe Thread, Type V (S/S By A-A-59326/5)
MS27025 - Coupling Half, Quick Disconnect, Cam-Locking Type, Female, Hose Shank, Type Vi (S/S By A-A-59326/6)
MS27026 - Coupling Half, Quick Disconnect, Cam-Locking Type, Female, External Pipe Thread, Type Vii (S/S By A-A-59326/7)
MS27027 - Coupling Half, Quick Disconnect, Cam-Locking Type, Female, Flanged, Type Viii (S/S By A-A-59326/8)
MS27028 - Coupling Half, Quick Disconnect, Cam-Locking Type, Cap, Dust, Type Ix (S/S By A-A-59326/10)
MS27029 - Coupling Half, Quick Disconnect, Cam-Locking Type, Plug, Dust, Type X (S/S By A-A-59326/11)
MS27030 - Gasket-Coupling Half, Quick Disconnect, Cam-Locking Type (S/S By A-A-59326)
MS27031 - Coupling Half, Quick Disconnect, Cam-Locking Type, Drilling Template (S/S By A-A-59326)
MS27053 - Adapter Assembly, Flared, Straight, Tube To Hose - With Swivel Nut
MS27054 - Adapter Assembly, Straight, Swivel Flange To Hose
MS27055 - Adapter Assembly, Flared, 45 Degrees Elbow, Tube To Hose - With Swivel Nut
MS27056 - Adapter Assembly, 45 Degrees Elbow, Swivel Flange To Hose
MS27057 - Adapter Assembly, Flared, 90 Degrees Elbow, Tube To Hose - With Swivel Nut
MS27058 - Adapter Assembly, 90 Degrees Elbow, Swivel Flange To Hose
MS27059 - Adapter Assembly, Flared, 45 Degrees Forged Elbow, Tube To Hose - With Swivel Nut
MS27060 - Adapter Assembly, Flared, 90 Degrees Forged Elbow, Tube To Hose-With Swivel Nut
MS27061 - Nipple Subassembly, Flared, Straight - With Swivel Nut
MS27062 - Nipple Subassembly, Straight, Swivel Flange
MS27063 - Elbow Subassembly, Flared, 45 Degrees, Swivel Nut
MS27064 - Elbow Subassembly, Swivel Flange, 45 Degrees
MS27065 - Elbow Subassembly, Flared, 90 Degrees, Swivel Nut
MS27066 - Elbow Subassembly, Swivel Flange, 90 Degrees
MS27067 - Elbow Subassembly, Flared, 45 Degrees Forged, Swivel Nut
MS27068 - Elbow Subassembly, Flared, 90 Degrees Forged, Swivel Nut
MS27069 - Socket, Hose Coupling
MS27070 - Sleeve, Hose Coupling
MS27071 - Union, Nipple
MS27072 - Wire, Retainer
MS27073 - Nut, Tube Coupling - Swivel (S/S By Sae-As4370)
MS27074 - Wire, Retainer
MS27075 - Nipple, Flared, Tube To Hose - Swivel Nut
MS27076 - Nipple, Straight, Swivel Flange
MS27077 - Flange, Swivel, Retaining
MS27078 - Shoulder, Swivel Flange - Aluminum Alloy
MS27079 - Shoulder, Swivel Flange - Corrosion Resisting
MS27080 - Shoulder, Swivel Nut - Aluminum Alloy
MS27081 - Shoulder, Swivel Nut - Corrosion Resisting
MS27082 - Elbow, Nipple End, Swivel Flange To Hose-90 Degrees
MS27083 - Elbow, Tube - 90 Deg Corrosion Resisting
MS27084 - Elbow, Nipple End, Swivel Flange To Hose - 45 Degrees
MS27085 - Elbow, Tube - 45 Deg Corrosion Resisting
MS27086 - Elbow, Nipple End, Flared, Tube To Hose - 90 Degrees Swivel Nut
MS27087 - Elbow, Nipple End, Flared, Tube To Hose - 45 Degrees Swivel Nut
MS27088 - Nipple, Aluminum Alloy
MS27089 - Nipple, Corrosion Resisting
MS27223 - Nipple Assembly 90 Degrees, Adapter, Hose To Tube, Reusable, Hydraulic, Fuel And Oil Lines 1/4 Inch Through 2 Inch Tube Sizes
MS27224 - Swivel Nut Assembly 90 Degrees, Adapter, Hose To Tube, Reusable, Hydraulic, Fuel And Oil Lines 1/4 Inch Through 2 1/2 Inch Tube Sizes
MS27225 - Nipple Assembly 45 Degrees, Adapter, Hose To Tube, Reusable, Hydraulic, Fuel And Oil Lines
MS27226 - Swivel Nut Assembly 45 Degrees, Adapter, Hose To Tube, Reusable, Hydraulic, Fuel And Oil Lines
MS27227 - Flange Nipple Assembly 90 Degrees, Adapter, Hose To Tube, Reusable, Hydraulic, Fuel And Oil Lines
MS27228 - Flange Assembly 90 Degrees, Adapter, Hose To Tube, Reusable, Hydraulic, Fuel And Oil Lines
MS27229 - Flange Nipple Assembly 45 Degrees, Adapter, Hose To Tube, Reusable, Hydraulic, Fuel And Oil Lines
MS27230 - Flange Assembly 45 Degrees, Adapter, Hose To Tube, Reusable, Fuel And Oil Lines
MS27231 - Straight Flange Nipple Assembly, Adapter, Hose To Tube, Reusable, Hydraulic, Fuel And Oil Lines
MS27232 - Straight Flange Assembly Adapter, Hose To Flange, Reusable, Hydraulic, Fuel And Oil Lines
MS27233 - Nut, Swivel, Tube Coupling, Designed For Adapter, Hose To Tube, Reuseable, Hydraulic, Fuel And Oil Lines (Use Ms 27073)
MS27234 - Elbow Tube, 90 Degrees
MS27235 - Elbow Tube, 45 Degrees
MS27236 - Shoulder - Designed For 45 Degrees And 90 Degrees Swivel Nut, Hose To Tube Adapters, Reusable, Hydraulic, Fuel And Oil Lines
MS27237 - Shoulder, Swivel Flange, Adapter, Hose To Tube, Hydraulic Fuel And Oil Lines, 1/2 Through 3 Inch Tubing Sizes
MS27238 - Wire, Nut Retaining, Designed For Adapter, Hose To Tube, Reusable, Hydraulic, Fuel And Oil Lines
MS27239 - Nipple, Straight, Adapter, Hose To Tube, Reusable, Hydraulic, Fuel And Oil Lines, 1/4 Through 4 Inch Tube Sizes
MS27381 - Adapter, Assembly, Flareless, Straight, Tube To Hose - With Swivel Nut
MS27382 - Adapter Assembly, Flareless, 45 Degree Elbow, Tube To Hose-With Swivel Nut
MS27383 - Adapter Assembly, Flareless, 90 Degrees Elbow, Tube To Hose - With Swivel Nut
MS27384 - Adapter Assembly, Flareless, 45 Degrees Forged Elbow, Tube To Hose - With Swivel Nut
MS27385 - Adapter Assembly, Flareless, 90 Degrees Forged Elbow, Tube To Hose - With Swivel Nut
MS27386 - Nipple Subassembly, Flareless, Straight - With Swivel Nut
MS27387 - Elbow Subassembly, Flareless, 45 Degrees, Swivel Nut
MS27388 - Elbow Subassembly, Flareless, 90 Degrees, Swivel Nut
MS27389 - Elbow Subassembly, Flareless, 45 Degrees Forged, Swivel Nut
MS27390 - Elbow Subassembly, Flareless, 90 Degrees, Forged, Swivel Nut
MS27391 - Nipple, Flareless, Tube To Hose - Swivel Nut
MS27392 - Shoulder, Swivel Nut, Flareless- Aluminum Alloy
MS27393 - Shoulder, Swivel Nut, Flareless- Corrosion
MS27394 - Elbow, Flareless, Tube To Hose - 90 Degrees Swivel Nut
MS27395 - Elbow, Flareless, Tube To Hose - 45 Degrees Swivel Nut
MS27404 - Adapter, Straight, Reusable, Tube To Hose, Low Pressure
MS27584 - Adapter, 1/4 Inch, Pneumatic Servicing, Usaf Ground Equipment To Raf Aircraft
MS27585 - Adapter, Water Methanol Servicing, Usaf Ground Equipment To Raf Aircraft
MS27586 - Adapter, Demineralized Water Servicing, Usaf Ground Equipment To Raf Aircraft
MS27587 - Adapter, Engine Oil Servicing, Us Ground Equipment To Raf Aircraft
MS27588 - Adapter, Nitrogen Servicing, Usaf Ground Equipment To Raf Aircraft
MS27589 - Adapter, Oxygen Servicing, Usaf Ground Equipment To Raf Aircraft
MS27590 - Adapter, 3/8 Inch, Hydraulic Servicing, Us Ground Equipment To Raf Aircraft
MS27591 - Adapter, 1/4 Inch Hydraulic Servicing, Us Ground Equipment To Raf Aircraft
MS27592 - Nipple, Adapter, Servicing, Us Ground Equipment To Raf Aircraft
MS27593 - Nut, Adapter, Servicing, Us Ground Equipment To Raf Aircraft
MS27594 - Adapter, Tire Inflating, Usaf Ground Equipment To Raf Aircraft
MS27607 - Body, Nitrogen And Pneumatic Servicing Adapter, Us Ground Equipment To Raf Aircraft
MS27608 - Adapter, 9-16 Inch Pneumatic Servicing, Us Ground Equipment To Raf Aircraft
MS27616 - Adapter Assembly, Flared, Straight, Tube To Hose - With Swivel Nut
MS27617 - Adapter Assembly, Flared, 45 Degrees Elbow, Tube To Hose - With Swivel Nut
MS27618 - Adapter Assembly, Flared, 90 Degrees Elbow, Tube To Hose - With Swivel Nut
MS27619 - Nipple Sub Assembly, Flared, Straight - With Swivel Nut
MS27620 - Elbow Sub Assembly, Flared, 45 Degrees, Swivel Nut
MS27621 - Elbow Sub Assembly, Flared, 90 Degrees, Swivel Nut
MS27622 - Socket, Hose Coupling
MS27623 - Sleeve, Hose Coupling
MS27624 - Union, Nipple
MS27625 - Wire, Retainer
MS27626 - Nipple, Flared, Tube To Hose-Swivel Nut
MS27627 - Elbow, Flared, Tube To Hose, 90 Degrees, Swivel Nut
MS27628 - Elbow, Flared, Tube To Hose, 45 Degrees, Swivel Nut
MS27629 - Adapter Assembly, Flareless, Straight, Tube To Hose-With Swivel Nut
MS27630 - Adapter Assembly, Flareless, 45 Degrees Elbow, Tube To Hose-With Swivel Nut
MS27631 - Adapter Assembly, Flareless, 90 Degrees Elbow, Tube To Hose-With Swivel Nut
MS27632 - Nipple Sub Assembly, Flareless, Straight-With Swivel Nut
MS27633 - Elbow Sub Assembly, Flareless, 45 Degrees, Swivel Nut
MS27634 - Elbow Sub Assembly, Flareless, 90 Degrees, Swivel Nut
MS27635 - Nipple, Flareless, Tube To Hose, Swivel Nut
MS27636 - Elbow, Flareless, Tube To Hose, 90 Degrees, Swivel Nut
MS27637 - Elbow, Flareless, Tube To Hose, 45 Degrees, Swivel Nut
MS27638 - Mandrel Sleeve Setting
MS27639 - Disassembly Tool
MS27755 - Connector, Hose Quick Discounnect, Female, Anti ,G, Suit
MS27769 - Plug, Pipe, Countersink Hex Head
MS27850 - Fittings, Installation Of Straight Threaded Fluid Connection
MS27851 - Fitting, Assembly, Straight Threaded, Fluid Connection, 4000 Psi
MS27852 - Nut, Cres, Fluid Connection Fitting, High Pressure
MS27853 - Flange, Plain, Cres, Fluid Connection Fitting, High Pressure
MS27854 - Flange, Threaded, Cres, Fluid Connection Fitting, High Pressure
MS27855 - Seal, Cres, Nickel Plated, Fluid Connection Fitting, High Pressure
MS27856 - Fitting Assembly, Straight Threaded, Fluid Connection, Low Pressure
MS27857 - Nut, Aluminum, Fluid Connection Fitting, Low Pressure
MS27858 - Flange, Plain, Aluminum, Fluid Connection Fitting, Low Pressure
MS27859 - Flange, Threaded, Aluminum, Fluid Connection Fitting, Low Pressure
MS27860 - Seal, Aluminum, Fluid Connection Fitting, Low Pressure
MS27861 - Elbow 45 Deg., Aluminum, Fluid Connection Fitting, Low Pressure
MS27862 - Elbow, 90 Deg., Aluminum, Fluid Connection Fitting, Low Pressure
MS27863 - Tee, Aluminum, Fluid Connection Fitting, Low Pressure
MS27864 - Cross, Aluminum, Fluid Connection Fitting, Low Pressure
MS27865 - Elbow, 45 Deg., Cres, Fluid Connection Fitting, High Pressure
MS27866 - Elbow, 90 Deg., Cres, Fluid Connection Fitting, High Pressure
MS27867 - Tee, Cres, Fluid Connection Fitting, High Pressure
MS27868 - Cross, Cres, Fluid Connection Fitting, High Pressure
MS27987 - Coupling, Straight, Hose To Hose, Interval (Npsh) Swivel, Rocker Lug, To External (Npsh)
MS27988 - Siamese Connection, Pipe To Hose, External (Npt) Single End, To Internal (Npsh) Siamese Swivel Ends, Rocker Lug (Use Mil-C-52404)
MS27989 - Coupling, Hose, (Water), Double Internal, Swivel, Rocker Lug, For Use With 1 1/2 Inch Water Hose (Use Mil-C-52404)
MS28740 - Fitting End - Hydraulic, Pneumatic, Fuel And Oil Hose (S/S By Ms24587)
MS28742 - Fitting End - Hose, Swivel, Detachable, Flanged, 3 Bolt, Straight
MS28743 - Fitting End, Swivel, Detachable, Flanged, 3 Bolt, 45 Deg. (S/S By Ms28749)
MS28744 - Fitting End - Hose, Swivel, Detachable, Flanged, 3 Bolt, 90 Degrees
MS28745 - Fitting End - Hose, Swivel, Detachable, Flanged, 4 Bolt, Straight
MS28746 - Fitting End - Hose, Swivel, Detachable, 45 Degrees Flange, 4 Bolt
MS28747 - Fitting End, Hose, Swivel, Detachable, Flanged, 4 Bolt, 90 Deg.
MS28748 - Connector, Swivel Flange, Reuseable, Hose (S/S By Ms 27232)
MS28749 - Elbow, Swivel Flange, 45 Deg., Reusable Hose (S/S By Ms27230)
MS28750 - Elbow, Swivel Flanged, 90 Degree, Reusable, Hose (S/S By Ms27228)
MS28752 - Fitting End, Self Sealing Fuel Hose, Swivel, Detachable
MS28753 - Fitting End, Self-Sealing Fuel Hose, Swivel, Detachable, Flanged, Straight
MS28754 - Fitting End, Self-Sealing Fuel Hose, Swivel, Detachable, Flanged, 45 Degrees
MS28755 - Fitting End, Self-Sealing Fuel Hose, Swivel, Detachable, Flanged, 90 Degrees
MS28756 - Hose Assembly, Detachable End Fitting, Self Sealing Fuel
MS28760 - Fitting End, Straight, Attachable, Hydraulic And Pneumatic, High Pressure Hose 3000 Psi, Flared Tube
MS28761 - Fitting End, Straight, Attachable, Hydraulic, High Pressure Hose 3000 Psi, Flareless Tube
MS28780 - Fitting End, 45 Degrees Elbow, Attachable, Hydraulic, High Pressure Hose 3000 Psi, Flared Tube
MS28781 - Fitting End, 90 Degrees Elbow, Attachable, Hydraulic, High Pressure Hose 3000 Psi, Flared Tube
MS29515 - Adapter, Pressure Fuel Servicing, Types A-1 And A-6
MS29522 - Plug, Hexagon Head, Oil Cooler
MS33514 - Fitting End, Standard Dimensions For Flareless Tube Connection And Gasket Seal (S/S By Sae-As33514)
MS33515 - Fitting End, Standard Dimensions For Bulkhead Flareless Tube Connections (S/S By Sae-As33515)
MS33561 - Connection, Aircraft Ground Air Conditioning, 5 Inch
MS33562 - Connection, Aircraft Ground Air Conditioning, 8 Inch
MS33565 - Connections, Ground Leakage Test, Pressurized Cabin, Aircraft
MS33566 - Fittings, Installation Of Flareless Tube, Straight-Threaded Connectors (S/S By Sae-As33566)
MS33583 - Tubing End Double Flare, Standard Dimensions For (S/S By Sae-As33583)
MS33584 - Tubing End Standard Dimensions For Flared (S/S By Sae-As4330)
MS33649 - Boss, Fluid Connection- Internalstraight Thread (S/S By Sae-As5202)
MS33651 - Boss And Installations - Air Connection
MS33656 - Fitting End, Standard Dimensions For Flared Tube Connection And Gasket Seal (S/S By Sae-As4395)
MS33657 - Fitting End, Standard Dimensions For Bulkhead Flared Tube Connection (S/S By Sae-As4396)
MS33658 - Fitting End, Hose Connection, Standard Dimensions For (S/S By Sae-As5132)
MS33660 - Tubing End, Hose Connection, Standard Dimensions For (S/S By Sae-As5131)
MS33677 - Fitting End, Taper Pipe Thread, Standard Dimensions For (S/S By Sae-As5201)
MS33740 - Nipple, Pneumatic Starting, 3 Inch Id
MS33786 - Fitting, Installation, Flared Tube And Hose, Swivel
MS35144 - Plug, Machine
MS35746 - Coupling, Automotive: Air Brake Lines (S/S By A-A-52484)
MS35748 - Packing, Preformed: Air Coupling (S/S By A-A-52484)
MS35755 - Cup, Oil, Lubricating, Ball Valve (Drive), Straight (S/S By Mil-C-1258)
MS35758 - Cups, Grease, Manual Feed
MS35759 - Cups, Grease, Automatic Feed
MS35842 - Clamp, Hose (Low-Pressure) Type "F" (S/S By A-A-52506)
MS35867 - Connection End, Internal Flare, Refrigeration (S/S By Sae-J513)
MS35868 - Connection, End, External Pipe Thread Refrigeration (S/S By Sae-J513)
MS35869 - Adapter, Straight, Male, Refrigeration Pipe To Flared Tube (S/S By Sae-J513)
MS35870 - Adapter, Refrigerant Cylinder, External Flarex Straight Pipe, Refrigeration (S/S By Sae-J513)
MS35871 - Tee, Pipe To Tube, Refrigeration (S/S By Sae-J513)
MS35872 - Flare Nut And Flare Seal Bonnet, Refrigeration (S/S By Sae-J513)
MS35873 - Connection, End, External Flare, Refrigeration (S/S By Sae-J513)
MS35917 - Elbow, Tube, 90 And 45 Degree, Solder- Joint, Refrigeration (S/S By A-A-59442)
MS35918 - Adapter, Straight, Pipe Thread To Tube, Male Solder-Joint, Refrigeration (S/S By A-A-59443)
MS35919 - Adapter, Straight, Pipe To Tube, External Flare To Female Solder-Joint, Refrigeration (S/S By Sae-J513)
MS35920 - Reducer Coupling, Tube, Male To Female Solder-Joint, Refrigeration (S/S By A-A-59444)
MS35921 - Adapter, Straight, Pipe To Tube, Pipe Thd To Female Solder-Joint, Refrigeration (S/S By A-A-59445)
MS35922 - Elbow, Tube, 90 Degree, Reducing, Solder-Joint, Refrigeration (S/S By A-A-59446)
MS35923 - Reducer Coupling, Tube, Female To Female Solder-Joint, Refrigeration (S/S By A-A-59447)
MS35924 - Plug And Cap, Tube, Solder-Joint, Refrigeration (S/S By A-A-59448)
MS35925 - Connection End, Solder-Joint, Refrigeration (S/S By Asme-Ansi-B16.22)
MS35926 - Connection End, Internal Pipe Thread, Refrigeration (S/S By Sae-J513)
MS35927 - Coupling, Tube, With Stop, Solder-Joint, Refrigeration (S/S By A-A-59449)
MS35928 - Elbow, Tube, Street, 90 And 45 Degree, Solder-Joint, Refrigeration (S/S By A-A-59450)
MS35929 - Tee, Tube, Straight, Solder Joint, Refrigeration (S/S By A-A-59451)
MS39070 - Tee, Tube (Use An-804)
MS39071 - Plug, Machine Thread (Use An-806)
MS39133 - Adapter, Straight, Pipe To Hose-Automotive Air Brake Hose
MS39134 - Spring, Helical, Compression, Automotive Air Brake Hose Adapter
MS39135 - Nut, Hose Coupling, Automotive Air Brake Hose Adapter
MS39136 - Sleeve, Compression, Tube-Hose Fitting, Automotive Air Brake Hose Adapter
MS39137 - Adapter Body, Automotive Air Brake
MS39154 - Hose Assembly, Hydraulic And Pneumatic, High Pressure (3000 Psi) Flared Tube (Use Ms500083)
MS39155 - Adapter, Straight, Pipe To Hose - Male, Reusable (S/S By Sae-J516)
MS39156 - Adapter, Straight, Tube To Hose - 37 Deg. Flare, Female, Reusable
MS39157 - Nipple, Tube, 45 Deg. Flared Type, Automotive (S/S By Sae-J512)
MS39158 - Adapter, Straight, Pipe To Tube, Male Pipe End, 45 Deg. Flare Type, Automotive (S/S By Sae J512)
MS39159 - Adapter, Straight, Pipe To Tube, Female Pipe End, 45 Deg. Flared Type, Automotive (S/S By Sae J512)
MS39160 - Elbow, Tube, 90 Deg., 45 Deg. Flared Type, Automotive (S/S By Sae J512)
MS39161 - Elbow, Pipe To Tube,90 Deg., Female Pipe End, 45 Deg. Flared Type, Automotive (S/S By Sea J512)
MS39162 - Elbow, Pipe To Tube, 90 Deg. Male Pipe End, 45 Deg. Flared Type, Automotive (S/S By Sae-J512)
MS39163 - Tee, Pipe To Tube, Male Pipe On Branch, 45 Deg. Flared Type, Automotive (S/S By Sae J512)
MS39164 - Tee, Pipe To Tube Male Pipe On Run 45 Deg. Flared Type, Automotive (S/S By Sae J512)
MS39165 - Tee, Tube, 45 Deg. Flared Type, Automotive (S/S By Sae-J512)
MS39166 - Nut, Tube Coupling, Short And Long 45 Deg. Flared Type, Automotive (S/S By Sae-J512)
MS39167 - Nut, Tube, Coupling-Flared Type, Automotive, Long (S/S By Ms39166)
MS39168 - Nipple, Tube - Tapered Sleeve (Compression) Type, Automotive (S/S By Sae-J512)
MS39169 - Adapter, Straight, Pipe To Tube, Male Pipe End-Tapered Sleeve (Compression) Type, Automotive (S/S By Sae J512)
MS39170 - Elbow, Tube, 90 Deg., Tapered Sleeve (Compression) Type, Automotive S/S By Sae J512)
MS39171 - Elbow, Pipe To Tube, 90 Deg., Male Pipe End-Tapered Sleeve (Compression) Type, Automotive (S/S By Sae-J512)
MIL-DTL-83798/4 - Fittings, Rubber Hose, Lightweight, Medium Pressure, Flareless, Swivel Nut, Straight
MIL-DTL-83798/5 - Fittings, Rubber Hose, Lightweight, Medium Pressure, Flareless, Swivel Nut, 45 Degrees
MIL-DTL-83798/6 - Fittings, Rubber Hose, Lightweight, Medium Pressure, Flareless, Swivel Nut, 90 Degrees
MIL-DTL-83798/7 - Fittings, Rubber Hose, Lightweight, Medium Pressure, Swivel Flange, Straight
MIL-DTL-83798/8 - Fittings, Rubber Hose, Lightweight, Medium Pressure, Swivel Flange, 45 Degrees
MIL-DTL-83798/9 - Fittings, Rubber Hose, Lightweight, Medium Pressure, Swivel Flange, 90 Degrees
MIL-DTL-85061 - Coupling, Fuel Line, Flexible, 125 Psi
This specification covers flexible couplings for joining tubing with SAE-AS5131 style A beaded ends for use in aircraft fuel and vent systems (see 6.1).
MIL-DTL-8783 - Clamp, Hose, Flat Band 500 Degrees F, General Specification For
This specification covers flat band, T-bolt latch clamps and flat band, quick-release latch clamps used in various aircraft installations of duct, hose and flex tubing.
MIL-DTL-8789 - Fitting End, Attachable, Hydraulic, High Pressure (3,000 Psi), General Specification For
This specification covers the requirements for fitting end, attachable, hydraulic pressure (3000 psi).
MIL-E-15330 - Expansion Joint, Pipe, Nonmetallic, Fire-Retardant (S/S By Astm-F1123, A-A-50604, A-A-50605)
This specification covers the construction and material requirements for fire-retardant, nonmetallic expansion joints.
MIL-E-17750 - Elbow, Pipe With Union Tailpiece, Non-Throttling Type, For Gravity-Flow Hot Water Radiators
MIL-E-17814 - Expansion Joints, Pipe, Slip-Type, Packed
This specification covers guided packed slip-type expansion joints used to absorb only axial movement in piping systems. This movement may be caused by thermal expansion, contraction or other factors.
MIL-E-18435 - Exhaust Head, Pipe (S/S By A-A-50494)
This specification covers cast iron and steel exhaust heads for moisture and oil entrainment and discharge of exhaust steam into the atmosphere.
MIL-E-23616 - Expansion Joint, Non Flanged Synthetic Rubber, Fire Retardant, 0-150 Psi Oil Or Water Service (2 Inch To 12 Inch Nominal Pipe Size) (S/S By Mil-E-15330)
MIL-F-1181 - Fittings, Pipe, Bronze, (Threaded) (S/S By Ww-P-460)
MIL-F-1183 - Fittings, Pipe, Cast Bronze, Silver-Brazing, General Specification For
This specification covers pipe fittings of cast bronze with at least one end for silver-brazing into steam, air, oil or water piping systems.
MIL-F-1183/1 - Fittings, Pipe, Cast Bronze, Silver Brazing; Bend, Pipe, Return
MIL-F-1183/10 - Fitting, Pipe, Cast Bronze, Silver-Brazing; Union, Pipe
MIL-F-1183/11 - Fitting, Pipe, Cast Bronze, Silver-Brazing; Union Elbow, Pipe And Union Tee, Pipe
MIL-F-1183/12 - Fittings, Pipe, Cast Bronze, Silver-Brazing; With Flanged Ends(S)
MIL-F-1183/2 - Fittings, Pipe, Cast Bronze, Silver-Brazing; Cap, Pipe
MIL-F-1183/3 - Fitting, Pipe, Cast Bronze, Silver Brazing; Coupling, Pipe
MIL-F-1183/4 - Fittings, Pipe, Cast Bronze, Silver-Brazing; Cross, Pipe
MIL-F-1183/5 - Fittings, Pipe, Cast Bronze, Silver-Brazing; Elbow, Pipe
MIL-F-1183/6 - Fittings, Pipe, Cast Bronze, Silver-Brazing; Lateral, Pipe
MIL-F-1183/7 - Fitting, Pipe, Cast Bronze,Silver-Brazing; Plug, Pipe
MIL-F-1183/8 - Fitting, Pipe, Cast Bronze, Silver-Brazing; Reducer, Pipe
MIL-F-1183/9 - Fittings, Pipe, Cast Bronze, Silver-Brazing; Tee, Pipe
MIL-F-1184 - Fittings, Pipe, Brass Or Bronze (Threaded) 125-Pound (S/S By Ww-P-460)
MIL-F-1224 - Fittings, Tube, Brass Or Bronze, 45 Degree Flared (S/S By Sae-J512)
MIL-F-15049 - Fitting, Tube, Brass Or Copper, 45 Degree Flared 230557
MIL-F-16735 - Fitting, Pipe Rapid-Action-Coupling, 6-Inch
MIL-F-17823 - Flanges, Pipe, Carbon Steel, 300 Psi, W.S.P. (Navy)
MIL-F-18032 - Fitting, Pipe, Butt Welding, Ferrous Metal (Use Ansi B16.9 And Ansi B16.28)
MIL-F-18180 - Flanges And Flanged Fittings, Pipe, Steel, Classes 150, 300, 400, 600, 900, 1500 And 2500, General Specification For (S/S By Asme-B16.5)
This specification covers cast, forged, and deep drawn plate steel pipe flanges and cast and forged flanaged fittings in the pressure-temperature ratings of class 250,300, 400, 600, 900, 1500 and 2500. Reducing flanges without hubs and blind flanges may be manufactured from steel plate.
MIL-F-18180/1 - Flanges And Flanged Fittings, Pipe, Steel, Classes 150, 300, 400, 600, 900, 1500 And 2500, Welding Neck Flanges (S/S By Asme-B16.5)
MIL-F-18180/10 - Flanges & Flanged Fitting, Pipe, Steel, Classes 150, 300, 4008 600, 9008 1500 & 2500, Straight & Reducing Sizes Tees (S/S By Asme-B16.5)
MIL-F-18180/11 - Flanges & Flanged Fittings, Pipe, Steel, Classes 150, 300, 400, 600, 900, 1500 & 2500 Straight & Reducing Size Base Tees (S/S By Asme-B16.5)
MIL-F-18180/12 - Flanges & Flanged Fittings, Pipe, Steel, Classes 150, 300, 400, 600, 900, 1500 & 2500, Straight & Reducing Size, Side Outlet Tees (S/S By Asme-B16.5)
MIL-F-18180/13 - Flanges & Flanged Fittings, Pipe, Steel, Classes 150, 300, 400, 600, 900, 1500 & 2500, Straight & Reducing Sizes Crosses (S/S By Asme-B16.5)
MIL-F-18180/14 - Flanges & Flanged Fittings, Pipe, Steel, Classes 150, 300, 400, 600, 900, 1500 & 2500, Straight & Reducing Size, Side Outlet Crosses (S/S By Asme-B16.5)
MIL-F-18180/15 - Flanges & Flanged Fittings, Pipe, Steel, Classes 150, 300, 400, 600, 900, 1500 & 2500, 45 Deg., Straight & Reducing Sizes Laterals (S/S By Asme-B16.5)
MIL-F-18180/16 - Flanges & Flanged Fittings, Pipe, Steel, Classes 150, 300, 400, 600, 900, 1500 & 2500, Concentric Reducers (S/S By Asme-B16.5)
MIL-F-18180/17 - Flanges & Flanged Fittings, Pipe, Steel, Classes 150, 300, 400, 600, 900, 1500 & 2500, Eccentric Reducers (S/S By Asme-B16.5)
MIL-F-18180/18 - Flanges & Flanged Fittings, Pipe, Steel, Classes 150, 300, 400, 600, 900, 1500 & 2500, Straight & Reducing Size, True Wyes (Y) (S/S By Asme-B16.5)
MIL-F-18180/2 - Flanges And Flanged Fittings, Pipe, Steel, Classes 150, 300, 400, 600, 900, 1500 And 2500, Socket Welding Flanges (S/S By Asme-B16.5)
MIL-F-18180/3 - Flanges And Flanged Fittings, Pipe, Steel, Classes 150, 300, 400, 600, 900 1500, And 2500; Slip-On Welding Flanges (S/S By Asme-B16.5)
MIL-F-18180/4 - Flanges And Flanged Fittings, Pipe, Steel, Classes 150, 300, 400, 600, 900, 1500 And 2500, Lapped Flanges (S/S By Asme-B16.5)
MIL-F-18180/5 - Flanges And Flanged Fittings, Pipe, Steel, Classes 150, 300, 400, 600, 900, 1500 And 2500 Threaded Flanges (S/S By Asme-B16.5)
MIL-F-18180/6 - Flanges And Flanged Fittings, Pipe, Steel, Classes 150, 300, 400, 600, 900, 1500 And 2500, Blind Flanges (S/S By Asme-B16.5)
MIL-F-18180/7 - Flanges And Flanged Fittings, Pipe, Steel, Classes 150, 300, 400, 600, 900, 1500 And 2500, 45 And 90 Degree, Straight And Reducing Size Elbows (S/S By Asme-B16.5)
MIL-F-18180/8 - Flanges & Flanged Fittings, Pipe, Steel, Classes 150, 300, 400, 600, 900, 1500 & 2500, 90 Deg., Straight & Reducing Sizes Base Elbows (S/S By Asme-B16.5)
MIL-F-18180/9 - Flanges & Flanged Fittings, Pipe, Steel, Classes 150, 300, 400, 600, 900, 1500 & 2500, 90 Degree, Straight & Reducing Size, Side Outlet Elbows (S/S By Asme-B16.5)
MIL-F-18280 - Fittings, Flareless Tube, Fluid Connection (S/S By Sae-As18280)
This specification establishes the requirements for flareless tube connection fittings, nuts and sleeves for use in fluid systems (see 6.1).
MIL-F-18287 - Fittings, Hose End, Detachable (For Self Sealing Fuel Hose)
MIL-F-18866 - Fitting, Hydraulic Tube, Flared, 37 Degree And Flareless, Steel (Use Sae-J514)
This specification covers 37 degree flared and flareless steel tube fittings, 1500 and 3000 pounds per square inch (psi) maximum design pressure, -65 Deg to 250 Deg Fahrenheit temperature range, for use in hydraulic or air systems.
MIL-F-19488 - Fittings, Hose, Water, And Steam (Other Than Flexible, Metallic) (S/S By Ww-C-621, Mil-C-52404 And Mil-S-12165)
This specification covers hose fittings for attaching to various hoses.
MIL-F-19607 - Fitting, Hose, Reusable, Medium And High Pressure (Use Mil-H-24135)
MIL-F-20236 - Fittings, Tube And Pipe, Butt Welding, 300 Ps1 And 775 Deg F Maximum (S/S By Ansi/Asme-B16.9)
MIL-F-20668 - Flange, Iron (Malleable)
MIL-F-20670 - Flanges, Pipe, Carbon Steel, 150 P.S.I., W.S.P. (For Naval Shipboard Use)(No S/S Document)
This specification covers carbon steel pipe flanges, 150 pounds per square inch (P.S.I.), W.S.P.
MIL-F-20672 - Fitting, Pipe, Aluminum Alloy (Threaded) 125 Pound
MIL-F-21467 - Fittings, Flareless, Fluid Connection (Shipboard Use) (S/S By Mil-F-18866)
MIL-F-24202 - Fitting, Butt Welding, Seamless Or Welded, 70-30 Copper-Nickel Alloy 700 Psi, 200 Degrees Fahrenheit
This specification covers 70-30 copper-nickel alloy seamless or welded butt-welding fittings in sizes 1/2 inch up to and including 16 inch iron pipe size (i.p.s.).
MIL-F-24227 - Fittings And Flanges, Cast Bronze, Silver, Brazing Suitable For Ultrasonic Inspection
This specification covers tube fittings and flanges of cast bronze with ends for silver-brazing into a piping system, suitable for ultrasonic inspection.
MIL-F-24787 - Fittings, End, Reusable For Flexible Hose Assemblies, General Specification For
This specification covers the requirements for reusable end fittings, elbow (90 Degrees) fittings and 180 Degrees return fittings for use with flexible rubber hose in low, medium and high pressure shipboard piping systems.
MIL-F-24787/1 - Fittings, End, Type F, Fl And Ffl, Flange, Reusable For Flexible Hose Assemblies
This specification covers reusable flanged end fittings for use with wire or synthetic fiber reinforced rubber hose.
MIL-F-24787/2 - Fittings, End, Type A, 37 Degrees Flare, Reusable For Flexible Hose Assemblies
This specification covers reusable SAE 37 degrees flare end fittings for use with wire or synthetic fiber reinforced rubber hose.
MIL-F-24787/3 - Fittings, End, Types C And Cl, O-Ring Seal Union, Reusable For Flexible Hose Assemblies
This specification covers reusable O-ring seal union end fittings for use with wire or synthetic fiber reinforced rubber hose.
MIL-F-24787/4 - Fittings, End, Types E And El, Split Clamp, Reusable, With Types Sc (Split Clamp), Tf Tailpiece Female And Tm Tailpiece Male For Flexible Hose Assemblies
This specification covers reusable split clamp end fittings, and adapters for use with wire or synthetic fiber reinforced rubber hose.
MIL-F-24787/5 - Fittings, End, Type D, Hose To Hose 90 Degrees Elbow, Reusable For Flexible Hose Assemblies
This specification covers reusable hose to hose 90 degrees elbow fittings for use with wire or synthetic fiber reinforced rubber hose.
MIL-F-24787/6 - Fittings, End, Type U, 180 Degrees, Return, Hose To Hose, Reusable For Flexible Hose Assemblies
This specification covers reusable 180 degrees return fittings for use with wire or synthetic fiber reinforced rubber hose.
MIL-F-24787/7 - Fittings, End, Types B And Bl, Gasket Seal Union, Reusable For Flexible Hose Assemblies
This specification covers reusable gasket seal union end fittings for use with wire or synthetic fiber reinforced rubber hose.
MIL-F-27417 - Fitting, Rocket Engine, Fluid Connection
MIL-F-2808 - Fitting, Air Hose, Salvage, 1 1/4 Inch
MIL-F-2864 - Floater, Hose, Nonmetallic
MIL-F-3268 - Fittings; Pipe, Steel, Special (For Tanker Unloading Installations) (S/S By A-A-50581)
This specification covers special fabricated steel pipe spool pieces and 90-degree elbows for use in tanker unloading operations.
MIL-F-3541 - Fittings, Lubrication, General Specification For (S/S By Sae-As35411)
This specification covers threaded lubrication fittings to be used for admitting and retaining lubricants supplied by pressure lubricating equipment.
MIL-F-45911 - Fittings, Automotive Tube, Spherical Sleeve (Compression) Type, Brass (See Notice 1 For Replacement Information)
MIL-F-45968 - Fittings, Automotive Tube, Brass, Inverted Flare (With Steel Nut) (See Notice 1 For Replacement Information)
MIL-F-52525/18 - Fitting, Wire Reinforced Hydraulic Hose And Clamp Halves: Adapter, Tube To Hose, Field Attachable (Reusable), 37 Degrees Flare Female Swivel To Screw On, Straight, Type E, For Use With Type 100Rx 4-Spiral-Light-Wire Reinforce Hose
MIL-F-52525/19 - Fittings, Wire Reinforced Hydraulic Hose And Clam-Halves: Field Attachable (Reusable), Clamp-On To 4-Bolt Split-Flange, Straight, Type A, Adapter, For Use With Type 100R1 Single Wire Braid Hose
MIL-F-52525/20 - Fittings, Wire Reinforced Hydraulic Hose And Clamp-Halves: Field Attachable (Reusable), Clamp-On To 4-Bolt Split-Flange, 45 Degrees, Bent Tube, Type A, Elbow, For Use With Type 100R1 Single Wire Braid Hose
MIL-F-52525/21 - Fittings, Wire Reinforced Hydraulic Hose And Clamp-Halves: Field Attachable (Reusable), Clamp-On To 4-Bolt Split-Flange, 90 Degrees, Shore Drop, Type A, Elbow, For Use With Type 100R1 Single Wire Braid Hose
MIL-F-52525/22 - Fittings, Wire Reinforced Hydraulic Hose And Clamp-Halves: Field Attachable (Reusable), Clamp-On To 4-Bolt Split-Flange, 90 Degrees Bent Tube, Long Drop, Type A, Elbow, For Use With Type 100R1 Single Wire Braid Hose
MIL-F-52525/26 - Fittings, Wire Reinforced Hydraulic Hose And Clamp-Halves: Field Attachable (Reusable), Clamp-On To 4-Bolt Split-Flange, 90 Degrees Bent Tube, Long Drop, Type C, Elbow, For Use With Type 100R10 4-Spiral Wrap Hose
MIL-F-52525/27 - Fittings, Wire Reinforced Hydraulic Hose And Clamp-Halves: Field Attachable (Reusable), Clamp-On To 4-Bolt Split-Flange, Straight, Type B, Adapter, For Use With Type 100R2 Double Wire Braid Hose (S/S By Mil-F-52525/10 Now Mil-Dtl-52525/10)
MIL-F-52525/28 - Fittings, Wire Reinforced Hydraulic Hose And Clamp-Halves: Field Attachable (Reusable), Clamp-On To 4-Bolt Split-Flange, 45 Degrees Bent Tube Type B, Elbow, For Use With Type 100R2 Double Wire Braid Hose (S/S By Mil-F-52525/11 Now Mil-Dtl-52525/11)
MIL-F-52525/29 - Fittings, Wire Reinforced Hydraulic Hose And Clamp-Halves: Field Attachable (Reuseable), Clamp-On To 4-Bolt Split-Flange, 90 Degrees Bent Tube, Short Drop, Type B, Elbow, For Use With Type 100R2 Double Braid Hose (S/S By Mil-F-52525/12)
MIL-F-52525/30 - Fittings, Wire Reinforced Hydraulic Hose And Clamp-Halves: Field Attachable (Reusable), Clamp-On To 4-Bolt Split-Flange, 90 Degrees, Bent Tube, Long Drop, Type B, Elbow, For Use With Type 100R2 Double Braid Hose
MIL-F-5506 - Fitting, Method Of Testing Tube
MIL-F-5509 - Fitting, Flared Tube, Fluid Connection (See Notice 2 For Additional Superseding Information)
This specification establishes the requirements for flared tube, pipe threaded and beaded type fluid connection fittings for use in all types of fluid systems. (see 6.1)
MIL-F-83798/10 - Fitting, Rubber Hose, Lightweight, Medium Pressure (Nipple Subassembly, Flared, Swivel Nut, Straight)
MIL-F-83798/11 - Fitting, Rubber Hose, Lightweight, Medium Pressure, (Nipple Subassembly, Flared, Swivel Nut, 45 Degrees)
MIL-F-83798/12 - Fitting, Rubber Hose, Lightweight, Medium Pressure (Nipple Subassembly, Flareless, Swivel Nut, 90 Degrees)
MIL-F-83798/13 - Fitting, Rubber Hose, Lightweight, Medium Pressure (Nipple Subassembly, Flareless, Swivel Nut, Straight)
MIL-F-83798/14 - Fitting, Rubber Hose, Lightweight, Medium Pressure, (Nipple Subassembly, Flareless Swivel Nut, 45 Degrees)
MIL-F-83798/15 - Fitting, Rubber Hose, Lightweight, Medium Pressure, (Nipple Subassembly, Swivel Nut, 90 Degrees)
MIL-F-83798/16 - Fitting, Rubber Hose, Lightweight, Medium Pressure (Nipple Subassembly, Swivel Flange Straight)
MIL-F-83798/17 - Fitting, Rubber Hose, Lightweight, Medium Pressure, (Nipple Subassembly, Swivel Flange, 45 Degrees)
MIL-F-83798/18 - Fitting, Rubber Hose, Lightweight, Medium Pressure, (Nipple Subassembly, Swivel Flange, 90 Degrees)
MIL-F-83798/19 - Fitting, Rubber Hose, Lightweight, Medium Pressure, (Nipple, Flared, Swivel Nut, Straight)
MIL-F-83798/20 - Fitting, Rubber Hose, Lightweight, Medium Pressure, (Nipple, Flared, Swivel Nut, 45 Degrees)
MIL-F-83798/21 - Fitting, Rubber Hose, Lightweight, Medium Pressure, (Nipple, Flared, Swivel Nut, 90 Degrees)
MIL-F-83798/22 - Fitting, Rubber Hose, Lightweight, Medium Pressure, (Nipple Flareless, Swivel Nut, Straight)
MIL-F-83798/23 - Fitting, Rubber Hose, Lightweight, Medium Pressure, (Nipple, Flared, Swivel Nut, 45 Degrees)
MIL-F-83798/24 - Fitting, Rubber Hose, Lightweight, Medium Pressure, (Nipple, Flareless, Swivel Nut, 90 Degrees)
MIL-F-83798/25 - Fitting, Rubber Hose, Lightweight, Medium Pressure, (Nipple, Swivel Flange, Straight)
MIL-F-83798/26 - Fitting, Rubber Hose, Lightweight, Medium Pressure, (Nipple, Swivel Flange, 45 Degrees)
MIL-F-83798/27 - Fitting, Rubber Hose, Lightweight, Medium Pressure, (Nipple, Swivel Flange, 90 Degrees)
MIL-F-83798/28 - Fitting, Rubber Hose, Lightweight, Medium Pressure, (Socket)
MIL-F-83798/29 - Fitting, Rubber Hose, Lightweight, Medium Pressure, (Sleeve Insert)
MIL-F-85421 - Fittings, Tube, Fluid Systems, Separable, Beam Seal, 3000/4000 Psi, General Specification For (S/S By Sae-As85421)
This specification covers the design requirements and test procedures for separable beam seal fittings which includes end fittings, fitting bodies, and boss fittings for use in aerospace fluid systems.
MIL-F-85421/10 - Fitting, Adapter, Beam Seal, 3000/4000 Psi, Male To Flareless (S/S By Sae-As85421/10)
MIL-F-85421/11 - Fitting, Union, Beam Seal, 3000/4000 Psi, Male Ends (S/S By Sae-As85421/11)
MIL-F-85421/12 - Fitting, Elbow, 90 Deg., Beam Seal, 3000/4000 Psi, Male To Male (S/S By Sae-As85421/12)
MIL-F-85421/13 - Fitting, Elbow, 90 Deg., Beam Seal, 3000/4000 Psi, Bulkhead, Male Ends (S/S By Sae-As85421/13)
MIL-F-85421/14 - Fitting, Elbow, 90 Deg., Beam Seal, 3000/4000 Psi, Male To Female (S/S By Sae-As85421/14)
MIL-F-85421/15 - Fitting, Elbow, 45 Deg., Beam Seal, 3000/4000 Psi, Bulkhead, Male Ends (S/S By Sae-As85421/15)
MIL-F-85421/16 - Fitting, Tee, Beam Seal, 3000/4000 Psi, Bulkhead On Run, Male Ends (S/S By Sae-As85421/16)
MIL-F-85421/17 - Fitting, Tee, Beam Seal, 3000/4000 Psi, Bulkhead On Branch, Male Ends (S/S By Sae-As85421/17)
MIL-F-85421/3 - Fitting, Tee, Reducer, Beam Seal, 3000/4000 Psi, 3 Male Ends (S/S By Sae-As85421/3)
MIL-F-85421/4 - Fitting, Tee, Reducer And Non-Reducer, Beam Seal, 3000/4000 Psi, Male On Run, Swivel Nut On Branch (S/S By Sae-As85421/4)
MIL-F-85421/5 - Fitting, Tee, Reducer And Non-Reducer, Beam Seal, 3000/4000 Psi, Male On Run And Branch, Swivel Nut On Run (S/S By Sae-As85421/5)
MIL-F-85720 - Fitting, Tube, Fluid Systems, Separable, High Pressure, Dynamic Beam Seal, General Specification For (S/S By Sae-As85720)
MIL-F-85720/1 - Fittings, Tube, Fluid Systems, Separable, High Pressure, Dynamic Beam Seal, Design Standard For Male End (S/S By Sae-As85720/1)
MIL-F-8839 - Fittings, Lubrication Drive Type
This specification covers drive-type lubrication fittings for maintenance use only and is not intended for new design.
MIL-G-15383 - Guns, Lubricating, Pressure, Hand-Operated, And Fittings (Shipboard Use) (S/S By Mil-F-3541)
MIL-H-62165/3 - Hose Fittings, Reusable, For Non Metallic Thermoplastic Hose
MIL-I-24063 - Insert Sets, Sound Isolation For Risic Risic-1 Flexible Connectors
This specification covers elastomeric inserts used with rubber insert sound isolation coupling (RISIC-1) flexible connectors.
MIL-I-24783 - Isolator, Ring Type, Pressure, For Shipboard Sewage Service
This specification covers the requirements for ring and flanged spool type isolators, installed between pipe flanges, to isolate pressure and vacuum gauges from clogging by sediment and solids in shipboard sewage systems.
MIL-J-26870 - Joint, Swivel, Aircraft Fuel
This specification covers aircraft fuel swivel joints.
MIL-J-2948 - Joint, Steel, Flexible (For Temporary Pipe Connections
MIL-M-11726 - Manifold, Air Line; One To Seven Outlets
MIL-M-27386 - Manifold Assemblies, Hose-Line: Fueling: 4-Inch, Quick-Coupling Type
MIL-M-28608 - Mender, Hose
MIL-M-52107 - Manifold, Fuel, Bulk Transfer, Quick Disconnect Cam-Locking Connections (Use Mil-M-82002)
MIL-N-17752 - Nozzle, Spray, Water Cooling
MIL-N-22602 - Nozzle, Abrasive Blast, Venturi Type
This specification covers abrasive blast nozzles of the venturi type.
MIL-N-25087 - Nipple, Emergency Oxygen Cylinder Valve, Breakoff (S/S By Mil-V-7560)
MIL-N-25556 - Nozzle, Fill And Vent, Fuming Nitric Acid Servicing
MIL-N-7364 - Nozzle, Oil Servicing, Pistol Grip, Non Drip, Type A&3A
MIL-P-10388 - Pipe Fittings: One Or More Ends Grooved (S/S By A-A-52592)
This specification covers grooved - and combination - type pipe fittings.
MIL-P-14351 - Pipeline Barrel, Cleaner Trap: Incoming And Outgoing
MIL-P-15742 - Plug, Plastic (Heat-Exchanger Tube) (S/S By A-A-59949)
This specification covers heat-exchanger-tube plugs which are driven into both ends of leaking condenser or other heat-exchanger-tubes to prevent contamination of the fluid surrounding the tubes.
MIL-P-18174 - Pipe Fitting, Steel, Threaded 2000, 3000, & 6000 Pound, Wog Use Ansi B16.11
MIL-P-18178 - Pipe Bends, Fabricated (For Shore Use)
MIL-P-18501 - Pipe And Fittings, Steel, Lightweight, Spiral And Longitudinal Welded Seam
MIL-P-18901 - Plug, Protective And Preservative, Plastic (For Internal Threads)
MIL-P-22011 - Pipe Fitting, Plastic, Rigid, Unplasticized, High Impact, Polyvinylchloride
MIL-P-54001 - Plug, Pipe, Magnetic, Headless, Iron, Steel Or Aluminum Alloy (S/S By A-A-59432)
MIL-PRF-12386 - Clamp, Repair, Pipe: With Fuel-Resistant Gasket
This specification covers two types of clamps one for split application and the other for pinhole application over damaged petroleum pipelines.
MIL-PRF-13789 - Strainers, Sediment: Pipeline, Basket Type
This specification covers single element basket-type sediment strainers from 0.75 to 12.00-inch nominal pipe size, for the removal of foreign material from fuel and oil service lines.
MIL-PRF-20042 - Flange, Pipe , Bronze (Silver Brazing)
This specification covers 50, 100, 150, 250, and 400 pound silver brazing bronze pipe flanges for use with water, oil, gas, or steam service not to exceed 425 degrees Fahrenheit ( F).
MIL-PRF-25676 - Adapter, Pressure Lubricating Oil Servicing, Aircraft (S/S By Mil-Dtl-25677)
This specification covers an adapter installed in an aircraft turbine engine lubricating oil system as a connection for ground servicing with pressure lubricating oil servicing equipment, using synthetic lubricating and preservative oil.
MIL-R-11521 - Ring, Expansion, Hose, Brass (S/S By A-A-55535)
MIL-R-17882 - Repair Kits, Metallic Pipe And General Purpose, Damage Control
This specification covers repair kits for metallic pipe and general purpose damage control use.
MIL-S-10385 - Sandtrap Assembly (For Portable 6-Inch Petroleum Pipeline)
This specification covers a sandtrap assembly for use in portable pipeline pumping station manifolds.
MIL-S-12165 - Strainer, Suction, Fire Hose, And Strainers, Suction, Hose
This specification covers firehose and water hose strainers to be attached to the intake end of a suction hose.
MIL-S-15573 - Strainers, Sediment, Pipeline (For Gasoline Service)
MIL-S-16293 - Strainers, Sediment: Pipeline, Water, Air, Gas, Oil Or Steam (S/S By Ww-S-2739)
This specification covers removable basket-and-screen-strainers of various sizes for use in water, air, gas, oil, or steam pipe lines, as specified (see 6.2 and 6.4), to remove dirt, scale particles, and other foreign matter.
MIL-S-17635 - Separators And Purifiers, Steam, Pipeline And Receiver
MIL-S-17849 - Strainers, Sediment, Pipeline, Duplex (With And Without Magnet)
This specification covers duplex strainers for use in lubricating, diesel, fuel oil and sea water cooling systems.
MIL-S-19901 - Spool Pieces (For Submarine Fuel Loading Line)
MIL-S-21427 - Strainer, Assemblies, Main Steam, High Pressure (Sizes 4 Inches And Above)
This specification covers high pressure steam strainer assemblies in sizes 4 inches and above intended primarily for main steam systems, for protection of power equipment and throttle valves from dirt, sediment, pipe scale and foreign objects.
MIL-S-22833 - Strainers, Sediment, Refrigerant 12
This specification covers noncleanable, screen-type, straight-through strainers for use with refrigerant 12 (dichlorodifluoromethane).
MIL-S-27661 - Strainer, Sediment, Jet Fuel Unit, 600 Gpm
MIL-S-28678 - Strainer, Steam, Bronze Body, 250 Psi, Silver Brazed Socket Connection (See Notice 1 For Replacement Information)
MIL-S-2953 - Strainers, Steam (Sizes 3 Inches And Below)
This specification covers basket-type steam strainers in sizes 3 inch and below.
MIL-S-416 - Strainer, Well, Water, Wire-Wound
This specification covers 10-foot long, wire-wound, telescopic type strainers used in connection with water-well construction.
MIL-STD-1330 - Precision Cleaning And Testing Of Shipboard Oxygen, Helium, Helium-Oxygen, Nitrogen, And Hydrogen Systems
MS39172 - Elbow, Pipe Totube, 90Degree, Female Pipe-End Tapered Sleeve (Compression) Type, Automotive (S/S By Sae J512)
MS39173 - Tee, Pipe To Tube, Male Pipe On Branch-Tapered Sleeve (Compression) Type, Automotive (S/S By Sae J512)
MS39174 - Tee, Tube-Tapered Sleeve (Compression) Type, Automotive (S/S By Sae J512)
MS39175 - Tee, Pipe To Tube, Male Pipe On Run-Tapered Sleeve (Compression) Type, Automotive (S/S By Sae J512)
MS39176 - Nut, Tube Coupling-Tapered Sleeve (Compression) Type, Automotive (S/S By Sae J512)
MS39177 - Sleeve, Compression, Tube Fitting-Tapered Sleeve (Compression) Type, Automotive (S/S By Sae J512)
MS39178 - Gross, Pipe To Tube, One Male Pipe End On Branch, For Air Lines- Spherical Sleeve
MS39179 - Adapter, Straight, Pipe To Tube, Male Pipe End, For Air Lines Spherical Sleeve (S/S By Sae-J246)
MS39180 - Adapter, Tube, Male Pipe End, Long-For Air Lines (S/S By Ms39179)
MS39181 - Adapter, Straight, Pipe To Tube, Female Pipe End, For Air Lines-Spherical Sleeve (S/S By Sae J246)
MS39182 - Elbow, Pipe To Tube, 90 Deg. Male Pipe End, For Air Lines-Spherical Sleeve (S/S By Sae J246)
MS39183 - Elbow, Tube, Male Pipe End, Long- For Air Lines (S/S By Ms39182)
MS39184 - Elbow, Pipe To Tube, 90 Deg., Female Pipe End, For Air Lines-Spherical Sleeve (S/S By Sae-J246)
MS39185 - Elbow, Pipe To Tube, 45 Deg., Male Pipe End, For Air Lines-Spherical Sleeve (S/S By Sae-J246)
MS39186 - Elbow, Tube, 90 Deg., For Air Lines-Spherical Sleeve (S/S By Sae-J246)
MS39187 - Nipple, Tube, For Air Lines-Spherical Sleeve (S/S By Sae-J246)
MS39188 - Tee, Tube, For Air Lines -Spherical Sleeve (S/S By Sae-J246)
MS39189 - Tee, Pipe To Tube, Female Pipe End On Run, Male Pipe End On Branch, For Air Lines, Spherical Sleeve (S/S By Sae-J246)
MS39190 - Tee, Pipe To Tube, Male Pipe End On Branch, For Air Lines-Spherical Sleeve (S/S By Sae-J246)
MS39191 - Tee, Pipe To Tube, Male Pipe End On Run, For Air Lines -Spherical Sleeve (S/S By Sae-J246)
MS39192 - Tee, Tube, One Male And One Female Pipe End-For Air Lines
MS39193 - Tee, Pipe To Tube, Female Pipe End On Rwn, For Airlines, Spherical Sleeve
MS39194 - Elbow, Tube, Female Pipe End, Right Side - For Air Lines
MS39195 - Elbow, Pipe To Tube-For Air Lines, Female Pipe End, Left Side
MS39196 - Nut Tube Coupling, Forair Lines-Spherical Sleeve (S/S By Sae-J246)
MS39197 - Sleeve, Compression, Tube Fitting, For Air Lines-Spherical Sleeve (S/S By Sae-J246)
MS39198 - Tees, Tube Safety Sleeve Compression Type
MS39199 - Nipple, Tube-Safety Sleeve Compression
MS39200 - Elbows, Tube - Safety Sleeve Compression Type, 90 Degree, Female Pipe End (User May Consult Ms51813 As A Possible Replacement)
MS39201 - Nipple, Tube-Safety Sleeve Compression Type
MS39201-SUP-2 - Nipple, Tube-safety Sleeve Compression Type
MS39202 - Elbows, Pipe To Tube - Safety Sleeve Compression Type, 90 Degree, Male Pipe End
MS39203 - Adapters, Straight, Pipe To Tube Safety Sleeve Compression Type, Female Pipe End
MS39204 - Elbows, Pipe To Tube - Safety Sleeve Compression Type, 45 Degree, Male Pipe End (Users May Consult Ms51817 As A Possible Replacement)
MS39205 - Tees, Pipe To Tube-Safety Sleeve Compression Type, Male Pipe Side
MS39206 - Adapters, Straight, Pipe To Tube - Safety Sleeve Compression Type, Male Pipe End
MS39207 - Elbows, Tube - Safety Sleeve Compression Type, 90 Degree
MS39208 - Tees, Pipe To Tube Safety Sleeve Compression Type, Female Pipe Side
MS39209 - Tees, Pipe To Tube Safety Sleeve Compression Type Female Pipe End
MS39210 - Nuts, Tube Coupling - Safety Sleeve Compression Type
MS39211 - Tees, Pipe To Tube Safety Sleeve Compression Type, Male Pipe End
MS39212 - Sleeves, Compression, Tube-Hose Fitting-Safety Sleeve Type
MS39230 - Elbow, Pipe-Street, 90 Deg (150 And 300 Lbs)
MS39231 - Elbow, Pipe Street, 45 Deg., (150 & 300 Pounds)
MS39232 - Reducer, Pipe Right Hand Thread (150 And 300 Pounds)
MS39233 - Coupling, Pipe Straight (150 & 300 Pounds)
MS39282 - Coupling, Hose, Field Attachable (Reuseable), Hydraulic, Pressure Type, Clamp-On, 4 Bolt Split Flange, Straight, Single Wire Braid Hose (S/S By Mil-F-52525/19)
MS39283 - Coupling, Hose, Field Attachable (Reuseable), Hydraulic, Pressure Type, Clamp-On, 4 Bolt Split Flange, 45 Deg. Bent Tube, For Ri Single Wire Braid Hose (S/S By Mil-F-52525/20)
MS39284 - Coupling, Hose, Field Attachable (Reuseable), Hydraulic, Pressure Type, Clamp-On, 4 Bolt Split Flange, 90 Deg. Bent Tube, Short Drop, Single Wire Braid Hose (S/S By Mil-F-52525/21)
MS39285 - Coupling, Hose, Field Attachable (Reuseable), Hydraulic, Pressure Type, Clamp-On, 4 Bolt Split Flange, 90 Deg, Bent Tube, Long Drop, Single Wire Braid Hose (S/S By Mil-F-52525/22)
MS39286 - Coupling, Hose, Field Attachable (Reuseable), Hydraulic, Pressure Type, Clamp-On, 4 Bolt Split Flange, Straight, For R10 4 Spiral Wrap Hose (S/S By Mil-F-52525/23 Now Mil-Dtl-52525/23)
MS39287 - Coupling, Hose, Field Attachable (Reuseable), Hydraulic, Pressure Type, Clamp-On, 4 Bolt Split Flange, 45 Deg. Bent Tube, 4 Spiral Wrap Hose (S/S By Mil-F-52525/24 Now Mil-Dtl-52525/24)
MS39288 - Coupling, Hose, Field Attachable (Reuseable), Hydraulic, Pressure Type, Clamp-On, 4 Bolt Split Flange, 90 Deg. Bent Tube, Short Drop, 4 Spiral Wrap Hose (S/S By Mil-F-52525/25 Now Mil-Dtl-52525/25)
MS39289 - Coupling, Hose, Field Attachable (Reuseable) Hydraulic, Pressure Type, Clamp On, 4 Bolt Split Flange, 90 Deg, Bent Tube, Long Drop, For R-10 4 Spiral Wrap Hose (S/S By Mil-F-52525/26)
MS39290 - Coupling, Hose, Field Attachable (Refuseable), Hydraulic, Screw On, Pressure Type, Female, Swivel, 37 Deg. Flare, Straight, Double Wire Braid Hose (S/S By Mil-F-52525/1 Now Mil-Dtl-52525/1)
MS39291 - Coupling, Hose, Field Attachable (Reusable), Hydraulic, Screw On, Pressure Type, Female, Swivel, 37 Deg. Flake, 45 Deg. Bent Tube, Double Wire Braid Hose (Use Mil-F-52525/2)
MS39292 - Coupling Hose, Field Attachable (Reuseable), Hydraulic Screw On, Pressure Type, Female Swivel, 37 Deg. Flare 90 Deg. Bent Tube, Short Drop For R 2 Double Wire Braid Hose (Use Mil-F-52525/3)
MS39293 - Coupling, Hose, Field Attachable (Reuseable, Swivel, 37 Deg. Flare, 90 Deg. Bent Tube, Long Drop, Double Wire Braid Hose (S/S By Mil-F-52525/4 Now Mil-Dtl-52525/4)
MS39294 - Clamp Half, Hydraulic, 4 Bolt Split Flange Type, 0 To 4,000 Psi Pressure And Suction Line (S/S By Mil-F-52525/16 Now Mil-Dtl-52525/16)
MS39295 - Clamp Half, Hydraulic, 4-Bolt Split Flange Type, 4,500, And 5,000 Psi
MS39296 - Connections, Flange To Port For Hydraulic Hose Couplins, 4 Bolt Split Flane Type (S/S By Mil-F-52525/17 Now Mil-Dtl-52525/17)
MS39307 - Coupling, Hose, Reusable, Hydraulic, Oil Suction, 2-Bolt Clamp-On, Straight
MS39308 - Coupling, Hose, Reusable, Hydraulic, Oil Suction, 2-Bolt Clamp-On, 45 Deg. Bent Tube
MS39309 - Coupling, Hose, Reusable, Hydraulic, Oil Suction, 2-Bolt Clamp-On, 90 Deg. Bent Tube
MS39312 - Flange Head Hydraulic, 4 Bolt Split Flange Type Hose Connection, 0 To 2,000, 2,500 & 3,000 Psi (S/S By Sae-J518)
MS39313 - Flange Head, Hydraulic, 4 Bolt Split Flange Type Hose Connection, 3,000 To 6,000 Psi (S/S By Sae-J518)
MS39314 - Port, Mounting Face Dimensions Hydraulic, 4 Bolt Split Flange Type Hose & Tube Connections, 0 To 2,000, 2,500, & 3,000 Psi (S/S By Sae-J518)
MS39315 - Port, Mounting Face Dimensions Hydraulic, 4 Bolt Split Flange Type Hose & Tube Connections, 3,000 To 6,000 Psi (S/S By Sae-J518)
MS39321 - Fitting, Flared, Tube, 37-Degree, Steel (S/S By Mil-F-18866)
MS39322 - Adapter; 37-Degree Flare, Female Swivel To Weld Socket, 3/4-Inch To 1-Inch (Use Sae-J514)
MS39323 - Tube - Reducer, 37-Degree Flare (Use Sae-J514)
MS39324 - Adapter, 37-Degree Flare To ,O, Ring Boss (Use Sae-J514)
MS39326 - Clamp, Spring: Hose (Low Pressure) Type "E" (S/S By Sae-J536)
MS39336 - Y Connection, Quick Disconnect, Cam-Locking Type, Flange, Type Xx (S/S By A-A-59326/20)
MS39337 - Coupling, Hose, Field Attachable (Reuseable) Hydraulic, Pressure Type, Clamp On, 4 Bolt Split Flange, Straight, Double Wire Braid Hose (S/S By Mil-F-52525/27)
MS39338 - Coupling, Hose, Field Attachable (Reuseable) Hydraulic, Pressure Type, Clamp On, 4 Bolt Split Flange, 45 Deg, Bent Tube, Double Wire Braid Hose (S/S By Mil-F-52525/28)
MS39339 - Coupling, Hose, Field Attachable (Reuseable) Hydraulic, Pressure Type, Clamp On, 4 Bolt Split Flange, 90 Deg, Bent Tube, Short Drop, Double Wire Braid Hose (S/S By Mil-F-52525/29)
MS39340 - Coupling, Hose, Field Attachable (Reuseable) Hydraulic, Pressure Type, Clamp On, 4 Bolt Split Flange, 90 Deg. Bent Tube, Long Drop Double Wire Braid Hose (S/S By Mil-F-52525/30)
MS39341 - Coupling, Hose, Field Attachable, (Refuseable), Hydraulic, Screw On, Pressure Type, Female, Swivel, 37 Deg. Flare, Straight, Single Wire Braid Hose (S/S By Mil-F-52525/5 Now Mil-Dtl-52525/5)
MS39342 - Coupling, Hose, Field Attachable (Reuseable), Hydraulic, Screw On, Pressure Type, Female, Swivel, 37 Deg. Flare, Straight, Four Spiral Wrap Hose (S/S By Mil-F-52525/9)
MS39343 - Coupling, Hose, Field Attachable (Reuseable), Hydraulic, Screw On, Pressure Type, Female, Swivel, 37 Deg. Flare, Straight, Six Spiral Wrap Hose
MS39344 - Coupling, Hose, Field Attachable (Reuseable), Hydraulic, Screw On Pressure Type, Female, Swivel, 37 Deg. Flare, 45 Deg. Bent Tube, Single Wire Braid Hose (S/S By Mil-F-52525/6 Now Mil-Dtl-52525/6)
MS39345 - Coupling, Hose, Field Attachable (Reuseable) Hydraulic, Screw On, Pressure Type, Female, Swivel, 37 Deg. Flare, 90 Deg. Bent Tube, Short Drop, Single Wire Braid Hose (S/S By Mil-F-52525/7 Now Mil-Dtl-52525/7)
MS39346 - Coupling, Hose, Field Attachable (Reuseable), Hydraulic, Screw On, Pressure Type, Female Swivel, 37 Deg. Flare, 90 Deg. Bent, Long Drop, Single Wire Braid Hose (S/S By Mil-F-52525/8 Now Mil-Dtl-52525/8)
MS39352 - Adapter Male By Male Quick Disconnect, Cam-Locking Type, Type Xxi (S/S By A-A-59326/21)
MS39353 - Adapter, Straight, Flange To Hose, Field Attachable (Reusable), Hydraulic, Pressure Type, Screw On, 4 Bolt Split Flange, Four Spiral Light Wire Reinforcement Hose
MS39354 - Elbow, Flange To Hose, Field Attachable (Reusable), Hydraulic, Pressure Type, Screw-On, 4-Bolt Split Flange, 45 Degrees Bend, Four Spiral Light Wire Reinforcement Hose
MS39355 - Elbow, Flange To Hose Attachable (Reusable), Hydraulic, Pressure Type, Screw On, 4 Bolt Split Flange, 90 Deg. Bend, Short Drop, Four Spiral Light Wire Reinforcement Hose
MS39356 - Elbow, Flange To Hose, Field Attachable (Reusable) Hydraulic, Pressure Type, Screw-On, 4-Bolt Split Flange, 90 Degrees Bend, Long Drop, Four Spiral Light Wire Reinforcement Hose
MS39357 - Adapter, Straight, Tube To Hose, Field Attachable (Reusable), Hydraulic, Screw-On Pressure Type, Female, Swivel, 37 Deg.Flare, Four Spiral Light Wire Reinforcement Hose (S/S By Mil-F-52525/18)
MS39358 - Elbow, Tube To Hose, Field Attachable (Reusable), Hydraulic, Screw On, Pressure Type, Female, Swivel, 37 Deg. Flare, 90 Deg. Bend, Short Drop, Four Spiral Light Wire Reinforcement Hose
MS39359 - Elbow, Tube To Hose, Field Attachable (Reusable), Hydraulic, Screw On, Pressure Type, Female, Swivel, 37 Deg. Flare, 90 Deg. Bend, Short Drop, Four Spiral Light Wire Reinforcement Hose
MS39360 - Elbow, Tube To Hose, Field Attachable (Reusable) Hydraulic, Screw-On, Pressure Type, Female Swivel, 37 Degrees Flare, 90 Degrees Bend, Long Drop, Four Spiral Light Wire Reinforcement Hose
MS49000 - Reducer, Male By Female And Female By Male Quick Disconnect, Cam-Locking Type Xi (S/S By A-A-59326/12)
MS49001 - Reducer, External Pipe Thread By Quick Disconnect, Cam-Locking Type, Male, Type Xii (S/S By A-A-59326/13)
MS49002 - Reducer, External Pipe Thread By Quick Disconnect, Cam-Locking Type, Female, Type Xiii (S/S By A-A-59326/14)
MS49003 - Y Connection, Quick Disconnect, Cam-Locking Type, Male-Female-Flange, Type Xiv (S/S By Ms27023, Ms27027 And Ms39336)
MS49005 - Plug, Pipe Headless, Aluminum, Iron Or Steel (Use Ww-P-471)
MS49006 - Plug, Pipe, Magnetic-Headless, Aluminum, Iron Or Steel (S/S By A-A-59432)
MS49008 - Tee, Tube, Flare Connection, Refrigeration (S/S By Sae-J513)
MS51500 - Fittings, Hydraulic Tube, Flared 37 Degree And Flareless, Steel; Adapter, Straight, Pipe To Tube, Male Pipe End, 37 Degree Flared(Use Sae-J514)
MS51501 - Nipple, Tube, Regular Hex, 37 Degree Flared (Use Sae-J514)
MS51502 - Nipple, Tube, Regular Hex, 37 Degree Flared (Use Sae-J514)
MS51503 - Adapter, Straight, Pipe To Tube, Female Pipe End, 37 Degrees Flared (Use Sae-J514)
MS51504 - Elbow, Pipe To Tube, 90 Degrees, Male Pipe End, 37 Degrees Flared (Use Sae-J514)
MS51505 - Elbow, Tube, 90 Degrees, 37 Degrees Flared (Use Sae-J514)
MS51506 - Fittings, Hydraulic Tube, Flared 37 Degree And Flareless, Steel; Elbow, Pipe To Tube, 90 Degree, Female Pipe End, 37 Degree Flared(Use Sae-J514)
MS51507 - Elbow, Tube 90 Degrees, Bulkhead, 37 Degrees Flared (Sae-J514)
MS51508 - Elbow, Pipe To Tube, 45 Degrees, Male Pipe End, 37 Degrees Flared (Use Sae-J514)
MS51509 - Elbow, Tube, 45 Degrees Bulkhead, 37 Degrees Flared (Use Sae-J514)
MS51510 - Tee, Tube, 37 Degrees Flared (Use Sae-J514)
MS51511 - Tee, Pipe To Tube, Male Pipe On Run, 37 Degrees Flared (Use Sae-J514)
MS51512 - Tee, Pipe To Tube, Male Pipe On Branch, 37 Degrees Flared (Use Sae-J514)
MS51513 - Tee, Pipe To Tube, Female Pipe On Branch, 37 Degrees Flared (Use Sae-J514)
MS51514 - Tee, Pipe To Tube, Female Pipe On Run, 37 Degrees Flared (Use Sae-J514)
MS51515 - Tee, Tube, Bulkhead On Branch, 37 Degrees Flared (Use Sae-J514)
MS51516 - Tee, Tube, Bulkhead On Run, 37 Degrees Flared (Use Sae-J514)
MS51517 - Cross, Tube, 37 Degrees Flared (Use Sae-J514)
MS51518 - Plug, Machine Thread, 37 Degrees Flared (Use Sae-J514)
MS51519 - Nipple, Tube, Large Hex For Use With O Ring, 37 Degrees Flared (Use Sae-J514)
MS51520 - Nipple, Tube, Bulkhead, 37 Degrees Flared (Use Sae-J514)
MS51521 - Elbow, Tube, 90 Degrees, Swivel, 37 Degrees, Flared (Use Sae-J514)
MS51522 - Elbow, Tube, 45 Degrees, Swivel, 37 Degrees, Flared (Use Sae-J514)
MS51523 - Tee, Tube To Swivel, Swivel On Run, 37 Degrees Flared (Use Sae-J514)
MS51524 - Tee, Tube To Swivel, Swivel On Branch, 37 Degrees, Flared (Use Sae-J514)
MS51525 - Fittings, Hydraulic Tube, Flared 37 Degree And Flareless, Steel; Adapter, Straight, Tube To Boss, O-Ring, 37 Degree Flared (Use Sae-J514)
MS51526 - Adapter, Straight, Tube To Boss, O Ring, 37 Degrees Flared (Long) (Use Sae-J514)
MS51527 - Fittings, Hydraulic Tube, Flared, 37 Degree And Flareless, Steel; Elbow, Tube To Boss, 90 Degree, O-Ring, 37 Degree Flared (Use Sae-J514)
MS51528 - Fittings, Hydraulic Tube, Flared, 37 Degree And Flareless, Steel; Elbow, Tube To Boss, 45 Degree, O-Ring, 37 Degree Flared (Use Sae-J514)
MS51529 - Fittings, Hydraulic Tube, Flared, 37 Degree And Flareless, Steel; Tee, Tube To Boss, Boss On Branch, O-Ring, 37 Degree Flared (Use Sae-J514)
MS51530 - Fittings, Hydraulic Tube, Flared, 37 Degree And Flareless, Steel; Tee, Tube To Boss On Run, O-Ring, 37 Degree Flared (Use Sae-J514)
MS51531 - Nut, Tube Coupling, 37 Degrees Flared (Use Sae-J514)
MS51532 - Fittings, Hydraulic Tube, Flared 37 Degree And Flareless, Steel; Cap, Tube, 37 Degree Flared (Use Sae-J514)
MS51533 - Sleeve, Compression, Tube Fitting, 37 Degrees Flared (Use Sae-J514)
MS51534 - Reducer, Tube, 37 Degrees Flared (Use Sae-J514)
MS51811 - Tee, Tube, Flareless Type, Hydraulic (Use Sae-J514)
MS51812 - Nipple, Tube, Bulkhead, Flareless Type, Hydraulic (Use Sae-J514)
MS51813 - Elbow, Pipe To Tube, 90 Deg., Female Pipe End, Flareless Type, Hydraulic (Use Sae-J514)
MS51814 - Nipple, Tube, Regular Hex, Flareless Type, Hydraulic (Use Sae-J514)
MS51815 - Elbow, Pipe To Tube, 90 Degrees, Male Pipe End, Flareless Type, Hydraulic (Use Sae-J514)
MS51816 - Adapter, Straight, Pipe To Tube, Female Pipe End, Flareless Type, Hydraulic (Use Sae-J514)
MS51817 - Elbow, Pipe To Tube, 45 Degrees, Male Pipe End, Flareless Type, Hydraulic (Use Sae-J514)
MS51818 - Tee, Pipe To Tube, Male Pipe On Branch, Flareless Type, Hydraulic (Use Sae-J514)
MS51819 - Adapter, Straight, Pipe To Tube, Male Pipe End, Flareless Type, Hydraulic (Use Sae-J514)
MS51820 - Elbow, Tube, 90 Degrees, Flareless Type, Hydraulic (Use Sae-J514)
MS51821 - Tee, Pipe To Tube, Female Pipe On Branch, Flareless Type, Hydraulic (Use Sae-J514)
MS51822 - Tee, Pipe To Tube, Female Pipe On Run, Flareless Type, Hydraulic (Use Sae-J514)
MS51823 - Nut, Tube, Coupling, Flareless Type, Hydraulic (Use Sae-J514)
MS51824 - Tee, Pipe To Tube, Male Pipe On Run, Flareless Type, Hydraulic (Use Sae-J514)
MS51825 - Sleeves, Clinches, Tube Fitting, Flareless Type, Hydraulic
MS51839 - Elbow, Tube To Boss, 90 Degrees, O-Ring, Flareless Type, Hydraulic (Use Sae-J514)
MS51841 - Tee, Tube To Boss, Boss On Bench, O-Ring, Flareless Type, Hydraulic (Use Sae-J514)
MS51842 - Elbow, Tube To Boss, 45 Degrees, O-Ring, Flareless Type, Hydraulic (Use Sae-J514)
MS51843 - Adapter, Straight, Tube To Boss, O-Ring, Flareless Type, Hydraulic (Use Sae-J514)
MS51845 - Elbows, Pipe, Brass Or Bronze, Threaded, 90-Degrees Straight, Class 125
MS51846 - Nipple, Pipe, Standard, Brass Or Copper (S/S By Astm-B687)
MS51847 - Bushing, Pipe, Shoulder (Use Ms 14315)
MS51852 - Elbow, Tube To Swivel, 90 Degrees, Flareless Type, Hydraulic (Use Sae-J514)
MS51853 - Tee, Tube To Swivel, Swivel On Branch, Flareless Type, Hydraulic (Use Sae-J514)
MS51854 - Tee, Tube To Swivel, Swivel On Run, Flareless Type, Hydraulic (Use Sae-J514)
MS51855 - Elbow, Tube, 90 Degrees, Bulkhead, Flareless Type, Hydraulic (Use Sae-J514)
MS51856 - Nipple, Tube, Large Hex, O-Ring, Flareless Type, Hydraulic (Use Sae-J514)
MS51860 - Locknut, Bulkhead, 37 Degrees Flared And Flareless Type, Hydraulic (Use Sae-J514)
MS51872 - Nipple, Pipe, Extra Strong, Brass Or Copper (S/S By Astm-B687)
MS51873 - Nipple, Pipe, Extra Strong Steel (See Notice 3 For Replacement Information)
MS51874 - Inverted Nut, Tube Coupling, Flare Type (S/S By Sae J512)
MS51875 - Adapter, Straight, Pipe To Tube, Male Pipe End, Inverted Flare Type (S/S By Sae-J512)
MS51876 - Adapter, Straight, Pipe To Tube, Female Pipe End, Inverted Flare Type (S/S By Sae-J512)
MS51877 - Nipple, Tube, Inverted Flare Type (S/S By Sae-J512)
MS51878 - Elbow, Pipe To Tube, 45 Degree, Male Pipe End, Inverted Flare Type (S/S By Sae-J512)
MS51879 - Elbow, Pipe To Tube; 90 Degree, Male Pipe End, Inverted Flare Type (S/S By Sae-J512)
MS51880 - Tee, Tube; Inverted Flare Type (S/S By Sae-J512)
MS51881 - Tee, Pipe To Tube; Male Pipe On Run, Inverted Flare Type (S/S By Sae-J512)
MS51882 - Tee, Pipe To Tube; Female Pipe-On Branch, Inverted Flare Type (S/S By Sae-J512)
MS51883 - Tee, Pipe To Tube; Male Pipe-On Branch, Inverted Flare Type (S/S By Sae-J512)
MS51884 - Plug, Pipe Square Head, Aluminum, Iron Or Steel (Use Ww-P-471)
MS51885 - Plug, Pipe, Bar Or Slotted, Aluminum, Iron Or Steel (Use Ww-P-471)
MS51886 - Locknut, Cast Iron, Malleable Iron Or Steel (S/S By Ww-P-471)
MS51887 - Bushing, Pipe Aluminum, Iron Or Steel (S/S By Ww-P-471)
MS51888 - Locknut, Adjustable, 37 Degrees Flared And Flareless Type, Hydraulic (Use Sae-J514)
MS51889 - Washer, Back-Up, 37 Degrees Flared And Flareless Type, Hydraulic (Use Sae-J514)
MS51890 - Fittings, Hydraulic Tube, Flared 37 Degree And Flareless, Steel; Cap Assembly, Tube, Flareless Type, Hydraulic (Use Sae-J514)
MS51891 - Plug, Tube Fitting, Threaded, Flareless Type, Hydraulic (Use Sae-J514)
MS51892 - Tee, Tube To Boss, Boss On Run, O-Ring, Flareless Type, Hydraulic (Use Sae-J514)
MS51893 - Adapter, Straight, Tube To Boss, Long, O-Ring, Flareless Type, Hydraulic (Use Sae-J514)
MS51894 - Cross, Tube, Flareless Type, Hydraulic (Use Sae-J514)
MS51895 - Reducer, Tube, Large Hex, O-Ring, Flareless Type, Hydraulic (Use Sae-J514)
MS51952 - Elbows, Pipe, Street, Brass Or Bronze, Threaded, 90-Deg., Street, Class 125
MS51953 - Nipple, Pipe, Standard Steel (S/S/ By Astm-A733)
MS51954 - Tee, Pipe-Reducing (150 Pounds)
MS70088 - Adapter, 45 Deg., Female Thread Swivel Collar, Quick Disconnect, Cam Locking, Male (Tank) (S/S By A-A-59326/15)
MS70091 - Coupling Half, Quick Disconnect, Cam Locking Type, Female, Flanged, Type Viii, (For D-1 Nozzle-Aircraft) (S/S By A-A-59326/9)
MS70095 - Coupling Half, Quick Disconnect, Cam-Locking Type, Male, Internal Straight Threads, Type Xvii (For Use With Nato Equipment) (S/S By A-A-59326/17)
MS70096 - Coupling Half, Quick Disconnect, Cam-Locking Type, Female, External Straight Threads, Type Xvi (For Use With Nato Equipment) (S/S By A-A-59326/16)
MS70097 - Coupling Half, Quick Disconnect, Cam-Locking Type, Female Reducer (Internal Pipe Thread) Type Xviii (S/S By A-A-59326/18)
MS70100 - Coupling Half, Quick Disconnect, Cam-Locking Type, Nipple Adapter, Male By External Grooved Pipe, Type Xix (S/S By A-A-59326/19)
MS87018 - Fitting, Flared, Swivel Nut, Straight, Medium Pressure Hose (S/S By Mil-F-83798/1 Now Mil-Dtl-83798/1)
MS87019 - Fitting, Flared, Swivel Nut, 45 Degrees Medium Pressure Hose (Use Mil-F-83798/2)
MS87020 - Fitting, Flared, Swivel Nut, 90 Deg. Medium Pressure Hose (S/S By Mil-F-83798/3 Now Mil-Dtl-83798/3)
MS87021 - Fitting, Flareless, Swivel Nut, Straight, Medium Pressure Hose (S/S By Mil-F-83798/4 Now Mil-Dtl-83798/4)
MS87022 - Fitting, Flareless, Swivel Nut, 45 Deg., Medium Pressure Hose (S/S By Mil-F-83798/5 Now Mil-Dtl-83798/5)
MS87023 - Fitting, Flareless, Swivel Nut, 90 Degrees, Medium Pressure Hose (S/S By Mil-F-83798/6 Now Mil-Dtl-83798/6)
MS87024 - Fitting, Swivel Flange, Straight, Medium Pressure Hose (S/S By Mil-F-83798/7 Now Mil-Dtl-83798/7)
MS87025 - Fitting, Swivel Flange, 45 Deg., Medium Pressure Hose (S/S By Mil-F-83798/8 Now Mil-Dtl-83798/8)
MS87026 - Fitting, Swivel Flange, 90 Deg., Medium Pressure Hose (S/S By Mil-F-83798/9 Now Mil-Dtl-83798/9)
MS9016 - Bushing - Screw, Plain
MS90385 - Coupling Assembly, Self Sealing, Quick Disconnect, Hydraulic (Water Based Hydraulic Fluid)
MS90520 - Flanges, Cast Iron (Class 125 And 250) And Bronze (150 And 300 Lb) (S/S By Ww-F-406)
MS90521 - Union, Pipe, Steel Or Malleable Iron, Threaded Connection (S/S By Ww-U-531)
MS90522 - Elbow, Cast-Iron Threaded Drainage
MS90523 - Tees, Y-Branches, Crosses, Cast Iron Threaded Drainage
MS90524 - Y-Branches, 90 Deg. Reducing, Cast Iron Threaded Drainage
MS90525 - Y Branches, 45 Deg., Straight & Reducing, Cast Iron Threaded Drainage
MS90526 - Coupling, Increasers, Offsets, Cast-Iron Threaded Drainage
MS90527 - Y-Branch, Tucker And Roof Connections, Cast-Iron Threaded Drainage
MS90528 - Trap, P-Bath And Running, Cast Iron Threaded Drainage
MS9082 - Sleeve, Swivel-Piloted O-Ring, Tube Connection, Brazing, Ams 5645
MS9083 - Collar, Swivel-Piloted O-Ring, Tube Connection, 3 Bolt, Ams 6322 (Asg)
MS9084 - Collar, Swivel-Piloted O-Ring, Tube Connection, 4 Bolt, Ams 6322 (Asg)
MS9085 - Collar, Swivel-Piloted O-Ring, Tube Connection, 6 Bolt, Ams6322
MS9095 - Nipple, Tube - Aluminum, Boss
MS9096 - Elbow, Tube - Ams 4135, Boss, 90 Deg.
MS9097 - Elbow, Tube - Ams 4135, Boss, 45 Deg.
MS9098 - Tee, Tube - Ams 4135, Boss
MS91600 - Nut, Tube Coupling, Series Lc Connectors
MS9193 - Nipple, Tube - Sae-Ams5639, Boss
MS9194 - Elbow, Tube - Sae-Ams5646, Boss, 90 Degrees
MS9195 - Elbow, Tube - Sae-Ams5639, Boss, 45 Degrees
MS9196 - Tee, Tube - Sae-Ams5646, Boss
MS9197 - Nut, Tube Coupling-Cres Sae-Ams5646, Silver Plate
MS9198 - Nut, Tube Coupling-Cres Sae-Ams5646
MS9199 - Nut, Tube Coupling-Aluminum, Ams 4121
MS9225 - Ferrule, Brazing, Tube Fitting - Cres, Ams 5646
MS9313 - Cap, Tube - Sae-Ams5646
MS9314 - Cap Assembly, Tube - Sae-Ams5646
MS9315 - Cap Assembly, Tube - Sae-Ams5646, Silver Plated Nut
MS9378 - Collar, Swivel-Piloted O-Ring, Tube Connection, 2 Bolt, Cres Steel
MS9381 - Coupling, Tube-Brazing, Ams 5646
MS9382 - Tee, Tube-Brazing, Ams 5646
MS9383 - Union, Tube - Aluminum Ams 4121, Conical End, Connector
MS9405 - Plug, Machine Thread-Ams 5646, Metal Gasket, Silver Plated, Mil-S-8879 Thread
MS9483 - Ferrule, Brazing, Tube Fitting-Cres Sae-Ams5646, Straight
MS9769 - Reducer, Tube - Straight, Tube To Boss
MS9879 - Sleeve, Swivel-Piloted O-Ring Tube Connection, Brazing, Ams 5646
MS9901 - Plug, Machine Thread - Ams 5646, Preformed Packing, Mil-S-8879 Thread
MS9953 - Plug, Machine Thread - Ams 4121, Preformed Packing Mil-S-8879 Thread
MS9954 - Plug, Machine Thread-Drilled, Ams 4121, Preformed Packing, Mil-S-8879 Thread
MSS-SP45 - Drain, Bypass And, Connections
This Standard Practice covers drains for valves and fittings regardless of material or pressure class; and fabricated bypasses for valves for all pressure classes.
MSS-SP83 - Pipe Unions Socket Welding And Threaded, Steel, Class 3000
NAS1237 - Elbow - Universal 90 Degree - Flareless
NAS1240 - Tee - Universal - Flareless
NAS1564 - Reducer, Flared Tube
NAS1761 - Elbow, Reducer, 45 Degree, Flareless Tube To Swivel
NAS1762 - Elbow Reducer, 90 Deg., Flareless Tube To Swivel
NAS1763 - Tee, Reducer, Flareless Tube To Swivel, Swivel On Run
NAS1764 - Tee, Reducing, Flareless Tube To Swivel, Swivel On Run
NAS1922 - Clamp, Hose, Band, Tangential Worm, Light Weight
NAS1923 - Clamp, Hose, Band, Tangential Worm, Light Weight
NAS398 - Clamp-Ratchet, Three Piece
NAS424 - Coupling - Tube Flared Fitting, Female Thread
NAS551 - Bolt-Universal Fitting
NAS553 - Elbow-Universal 15 Degrees
NAS591 - Coupling, Rigid Tube Connector, Aluminum
NAS592 - Ring-Rigid Tube Connector, Aluminum
NAS593 - Nut - Rigid Tube Connector, Aluminum
NAS594 - Coupling, Rigid Tube Connector, Corrosion Resistant Steel
NAS595 - Ring - Rigid Tube Connector, Corrosion Resistant Steel
NAS596 - Nut, Rigid Tube Connector, Corrosion Resistant Steel
NAS597 - Fitting, Rigid Tube Connector Flared Tube
NAS652 - Coupling, Rigid Tube Bulkhead Connector
QPL-15330-8 - Expansion Joint, Pipe, Synthetic Rubber, Fire-Retardant
QPL-17882-26 - Repair Kits, Metallic Pipe And General Purpose, Damage Control (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-18280-40 - Fittings, Flareless, Tube, Fluid Connection (S/S By Qpl-As18280)
QPL-18287-3 - Fitting, Hose End, Detachable (For Self Sealing Fuel Hose)
QPL-19179-16 - Coupling Assembly, Quick Diconnect, Fuel
QPL-19607 - Fitting, Hose, Reusable, Medium And High Pressure
QPL-21467-8 - Fittings, Flareless, Fluid Connection (Shipboard Use) (See Notice 1 For Replacement Information)
QPL-24202-16 - Fitting, Butt Welding, Seamless Or Welded, 70-30 Copper-Nickel Alloy, 700 Psi, 200 Deg. F.
QPL-24356-15 - Couplings, Segmented, & Split Clamps Reattachable, 2-1/2-, 4-, 6- & 7-Inch, For Refueling At Sea Hose
QPL-24787-12 - Fittings, End, Reusable For Flexible Hose Assemblies, General Specification For (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-25427-19 - Coupling Assembly, Hydraulic, Self-Sealing, Quick-Disconnect (Replaced By The Qualified Products Database (Qpd) See Notice 3 For Additional Information)
QPL-25531-20 - Coupling Half, Quick Disconnect, Pneumatic Starter, External, Low Pressure (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-25676-11 - Adapter, Pressure Lubricating Oil Servicing, Aircraft
QPL-25677-21 - Adapter, Cap, And Nozzle, Pressure Lubricating Oil Servicing, Aircraft, General Specification For (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-27272-15 - Fittings, Polytetrafluoroethylene Hose, High Temperature, Medium Pressure, General Specification For (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-27417-1 - Fitting, Rocket Engine, Fluid Connection
QPL-2948-4 - Joint, Steel, Flexible, For Temporary Pipe Connections(
QPL-38726-14 - Adapter Assembly, Reusable, Flexible Hose, Low Pressure (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-4109-3 - Coupling Assembly, Air Hose, Quick - Operating
QPL-5070-24 - Adapter, Hose To Hose, Pipe And Flange, Reusable - Hydraulic, Fuel And Oil Lines, General Specification For (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-52525-14 - Fittings, Hose, Reusable, Field-Attachable And Clamp-Halves, General Specification For (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-6985-14 - Clamp, Hose
QPL-7942-5 - Connector, Hose, Quick Acting, Anti (G) Suit
QPL-83296-14 - Fittings, Corrosion Resistant Steel, High Temperature, High Pressure (3000 Psi), Hydraulic And Pneumatic (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-83798/1 - Fittings, Rubber Hose, Lightweight, Medium Pressure, General Specification For (S/S By Qpl-83798)
QPL-83798/2 - Fittings, Rubber Hose, Lightweight, Medium Pressure General Specification For (S/S By Qpl-83798)
QPL-83798/3-1 - Fitting, Rubber Hose, Lightweight, Medium Pressure General Specification
QPL-83798/4-1 - Fitting, Rubber Hose, Lightweight, Medium Pressure General Specification For
QPL-83798/5-1 - Fittings, Rubber Hose, Lightweight, Medium Pressure, General Specification For
QPL-83798/6-1 - Fittings, Rubber Hose, Lightweight, Medium Pressure, General Specification For
QPL-83798/7 - Fittings, Rubber Hose, Lightweight, Medium Pressure, General Specification For (S/S By Qpl-83798)
QPL-83798/8-1 - Fitting, Rubber Hose, Lightweight, Medium Pressure, General Specification For (S/S By Qpl-83798)
QPL-83798/9 - Fitting, Rubber Hose, Lightweight, Medium Pressure, General Specification For
QPL-83798-9 - Fittings, Rubber Hose, Lightweight, Medium Pressure, General Specification For (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-8783-15 - Clamp, Hose, Flat Band 500 Deg. F (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-8789-22 - Fitting End, Attachable Hydraulic High-Pressure (3,000 Psi), General Specification For (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-960-28 - Traps, Steam, Intermittent Discharge And Continuous Flow, Naval Shipboard (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
UL109 - Tube Fittings For Flammable And Combustible Fluids, Refrigeration Service, And Marine Use
These requirements cover fittings to be used in tubing carrying designated flammable or combustible fluids and refrigerants.
UL567 - Petroleum Products And Lp-Gas, Pipe Connectors For
These requirements cover emergency breakaway fittings, swivel connectors and pipe-connecting fittings of the treadless compression type.
USAS-B2.4 - Hose Couplings Screw Threads (See Notice Of Withdrawal For Replacement Information)
The purpose of this document is to provide standards for application to the threaded parts of hose couplings, valves, nozzles, and all other fittings used in direct connection with hose in-service in nominal sizes of 1/2, 5/8, 3/4, l, 1-1/4, 1-1/2, 2, 2-1/2, 3, 3-1/2 and 4 in.
WW-C-1692 - Coupling Assembly And Mender, Hose, (Plastic And Rubber) (S/S By A-A-2921)
WW-C-440 - Clamps, Hose, (Low-Pressure) (S/S By A-A-52506)
WW-C-623 - Couplings, Hose, Garden And Water (Superseeded By Ww-C-624)
WW-C-624 - Coupling Assembly, Hose (Garden, Water, And Water Suction) (S/S By A-A-59614)
This specification covers couplings used with garden, water, and water suction hose.
WW-C-626 - Coupling, Hose, Oil Suction And Discharge
WW-C-631 - Couplings, Hose, Pneumatic And Spray (For Working Pressures Up To 150 Pounds Per Square Inch)
WW-C-633 - Coupling Halves, Cap And Wye; Quick Disconnect Pneumatic Hose, Two-Lug Universal Type (S/S By A-A-59553)
This specification covers two-lug universal, pneumatic hose, quick disconnect coupling halves, cap and wye.
WW-C-636 - Coupling, Hose, Steam (S/S By M1L-C-52705)
WW-C-646 - Coupling, Hose, Water Suction (Use Ww-C-624)
WW-F-406 - Flanges, Cast-Iron (Classes 125 And 250) And Bronze (Classes 150 And 300) (S/S By Ansi-B16.1 And Ansi-B16.24)
This specification covers cast-iron and bronze flanges for general application.
WW-N-351 - Nipple, Pipe, Threaded (S/S By Astm-A733-86 And Astm-B687)
This specification covers threaded pipe nipples made of brass, copper, or steel.
WW-N-701 - Nozzles, Hose, Garden (For 5/8 Inch And 3/4 Inch Hose) (S/S By A-A-50461)
This specification covers garden hose nozzles of the adjustable periphery jet type.
WW-P-325 - Pipe, Bends, Traps, Caps And Plugs, Lead (For Industrial Pressure, And Soil And Waste Applications)
This specification covers lead pipe, bends, traps, caps and plugs.
WW-P-460 - Pipe Fittings; Brass Or Bronze (Threaded), Classes 125 And 250 Pound
This specification covers threaded pipe fittings made of brass or bronze, classes 125 and 250. Certain requirements also pertain to wrought or cast plugs, bushings, couplings, and caps.
WW-P-471 - Pipe Fittings: Bushings, Locknuts, And Plugs; Iron, Steel, And Aluminum; (Threaded); 125-150 Pounds (S/S By A-A-59616)
This specification covers the requirements for bushings, locknuts, and plugs made of aluminum, iron, or steel.
WW-P-491 - Pipe Fitting, Cast Iron, (Threaded) Drainage (Us/S By Ansi-B16.12, Ms90522, Ms90523, Ms90524, Ms90525, Ms90526, Ms90527 And Ms90528)
WW-P-501 - Pipe Fittings, Cast Iron, Screwed 125 And 250 Pound (S/S By Asme-B16.4)
WW-P-521 - Pipe Fittings, Flange Fittings, And Flanges, Steel And Malleable Iron (Threaded And Butt Welding) Class 150 (S/S By Asme-B16.3, Asme-B16.5 And Asme-B16.9)
WW-S-00615 - Head, Sprinkler, (Underground Connected) (S/S By Ww-H-001220)
WW-T-696 - Traps, Steam (S/S By A-A-60001)
WW-T-725 - Tube Fitting, Copper And Copper Alloy, Wrought Or Cast, Solder Ends (S/S By Ansi-B16.18, Ansi-B16.22 And Mss-Sp104)
WW-U-516 - Unions, Brass Or Bronze, Threaded Pipe Connections And Solder-Joint Tube Connections (S/S By A-A-59617)
This specification covers bronze or brass unions with threaded pipe or solder-joint tube connections for joining nonferrous pipe and tubing.
WW-U-531 - Unions, Pipe, Steel Or Malleable Iron: Threaded Connection, 150 Lb, 250 Lb, 300 Lb Wsp (S/S By Asme-B16.39)
Fittings, Pipe, Steel, Classes 150, 300, 400, 600, 900, 1500 & 2500, 90 Degree, Straight & Reducing Size, Side Outlet Elbows (S/S By Asme-B16.5)
MIL-F-18280 - Fittings, Flareless Tube, Fluid Connection (S/S By Sae-As18280)
This specification establishes the requirements for flareless tube connection fittings, nuts and sleeves for use in fluid systems (see 6.1).
MIL-F-18287 - Fittings, Hose End, Detachable (For Self Sealing Fuel Hose)
MIL-F-18866 - Fitting, Hydraulic Tube, Flared, 37 Degree And Flareless, Steel (Use Sae-J514)
This specification covers 37 degree flared and flareless steel tube fittings, 1500 and 3000 pounds per square inch (psi) maximum design pressure, -65 Deg to 250 Deg Fahrenheit temperature range, for use in hydraulic or air systems.
MIL-F-19488 - Fittings, Hose, Water, And Steam (Other Than Flexible, Metallic) (S/S By Ww-C-621, Mil-C-52404 And Mil-S-12165)
This specification covers hose fittings for attaching to various hoses.
MIL-F-19607 - Fitting, Hose, Reusable, Medium And High Pressure (Use Mil-H-24135)
MIL-F-20236 - Fittings, Tube And Pipe, Butt Welding, 300 Ps1 And 775 Deg F Maximum (S/S By Ansi/Asme-B16.9)
MIL-F-20668 - Flange, Iron (Malleable)
MIL-F-20670 - Flanges, Pipe, Carbon Steel, 150 P.S.I., W.S.P. (For Naval Shipboard Use)(No S/S Document)
This specification covers carbon steel pipe flanges, 150 pounds per square inch (P.S.I.), W.S.P.
MIL-F-20672 - Fitting, Pipe, Aluminum Alloy (Threaded) 125 Pound
MIL-F-21467 - Fittings, Flareless, Fluid Connection (Shipboard Use) (S/S By Mil-F-18866)
MIL-F-24202 - Fitting, Butt Welding, Seamless Or Welded, 70-30 Copper-Nickel Alloy 700 Psi, 200 Degrees Fahrenheit
This specification covers 70-30 copper-nickel alloy seamless or welded butt-welding fittings in sizes 1/2 inch up to and including 16 inch iron pipe size (i.p.s.).
MIL-F-24227 - Fittings And Flanges, Cast Bronze, Silver, Brazing Suitable For Ultrasonic Inspection
This specification covers tube fittings and flanges of cast bronze with ends for silver-brazing into a piping system, suitable for ultrasonic inspection.
MIL-F-24787 - Fittings, End, Reusable For Flexible Hose Assemblies, General Specification For
This specification covers the requirements for reusable end fittings, elbow (90 Degrees) fittings and 180 Degrees return fittings for use with flexible rubber hose in low, medium and high pressure shipboard piping systems.
MIL-F-24787/1 - Fittings, End, Type F, Fl And Ffl, Flange, Reusable For Flexible Hose Assemblies
This specification covers reusable flanged end fittings for use with wire or synthetic fiber reinforced rubber hose.
MIL-F-24787/2 - Fittings, End, Type A, 37 Degrees Flare, Reusable For Flexible Hose Assemblies
This specification covers reusable SAE 37 degrees flare end fittings for use with wire or synthetic fiber reinforced rubber hose.
MIL-F-24787/3 - Fittings, End, Types C And Cl, O-Ring Seal Union, Reusable For Flexible Hose Assemblies
This specification covers reusable O-ring seal union end fittings for use with wire or synthetic fiber reinforced rubber hose.
MIL-F-24787/4 - Fittings, End, Types E And El, Split Clamp, Reusable, With Types Sc (Split Clamp), Tf Tailpiece Female And Tm Tailpiece Male For Flexible Hose Assemblies
This specification covers reusable split clamp end fittings, and adapters for use with wire or synthetic fiber reinforced rubber hose.
MIL-F-24787/5 - Fittings, End, Type D, Hose To Hose 90 Degrees Elbow, Reusable For Flexible Hose Assemblies
This specification covers reusable hose to hose 90 degrees elbow fittings for use with wire or synthetic fiber reinforced rubber hose.
MIL-F-24787/6 - Fittings, End, Type U, 180 Degrees, Return, Hose To Hose, Reusable For Flexible Hose Assemblies
This specification covers reusable 180 degrees return fittings for use with wire or synthetic fiber reinforced rubber hose.
MIL-F-24787/7 - Fittings, End, Types B And Bl, Gasket Seal Union, Reusable For Flexible Hose Assemblies
This specification covers reusable gasket seal union end fittings for use with wire or synthetic fiber reinforced rubber hose.
MIL-F-27417 - Fitting, Rocket Engine, Fluid Connection
MIL-F-2808 - Fitting, Air Hose, Salvage, 1 1/4 Inch
MIL-F-2864 - Floater, Hose, Nonmetallic
MIL-F-3268 - Fittings; Pipe, Steel, Special (For Tanker Unloading Installations) (S/S By A-A-50581)
This specification covers special fabricated steel pipe spool pieces and 90-degree elbows for use in tanker unloading operations.
MIL-F-3541 - Fittings, Lubrication, General Specification For (S/S By Sae-As35411)
This specification covers threaded lubrication fittings to be used for admitting and retaining lubricants supplied by pressure lubricating equipment.
MIL-F-45911 - Fittings, Automotive Tube, Spherical Sleeve (Compression) Type, Brass (See Notice 1 For Replacement Information)
MIL-F-45968 - Fittings, Automotive Tube, Brass, Inverted Flare (With Steel Nut) (See Notice 1 For Replacement Information)
MIL-F-52525/18 - Fitting, Wire Reinforced Hydraulic Hose And Clamp Halves: Adapter, Tube To Hose, Field Attachable (Reusable), 37 Degrees Flare Female Swivel To Screw On, Straight, Type E, For Use With Type 100Rx 4-Spiral-Light-Wire Reinforce Hose
MIL-F-52525/19 - Fittings, Wire Reinforced Hydraulic Hose And Clam-Halves: Field Attachable (Reusable), Clamp-On To 4-Bolt Split-Flange, Straight, Type A, Adapter, For Use With Type 100R1 Single Wire Braid Hose
MIL-F-52525/20 - Fittings, Wire Reinforced Hydraulic Hose And Clamp-Halves: Field Attachable (Reusable), Clamp-On To 4-Bolt Split-Flange, 45 Degrees, Bent Tube, Type A, Elbow, For Use With Type 100R1 Single Wire Braid Hose
MIL-F-52525/21 - Fittings, Wire Reinforced Hydraulic Hose And Clamp-Halves: Field Attachable (Reusable), Clamp-On To 4-Bolt Split-Flange, 90 Degrees, Shore Drop, Type A, Elbow, For Use With Type 100R1 Single Wire Braid Hose
MIL-F-52525/22 - Fittings, Wire Reinforced Hydraulic Hose And Clamp-Halves: Field Attachable (Reusable), Clamp-On To 4-Bolt Split-Flange, 90 Degrees Bent Tube, Long Drop, Type A, Elbow, For Use With Type 100R1 Single Wire Braid Hose
MIL-F-52525/26 - Fittings, Wire Reinforced Hydraulic Hose And Clamp-Halves: Field Attachable (Reusable), Clamp-On To 4-Bolt Split-Flange, 90 Degrees Bent Tube, Long Drop, Type C, Elbow, For Use With Type 100R10 4-Spiral Wrap Hose
MIL-F-52525/27 - Fittings, Wire Reinforced Hydraulic Hose And Clamp-Halves: Field Attachable (Reusable), Clamp-On To 4-Bolt Split-Flange, Straight, Type B, Adapter, For Use With Type 100R2 Double Wire Braid Hose (S/S By Mil-F-52525/10 Now Mil-Dtl-52525/10)
MIL-F-52525/28 - Fittings, Wire Reinforced Hydraulic Hose And Clamp-Halves: Field Attachable (Reusable), Clamp-On To 4-Bolt Split-Flange, 45 Degrees Bent Tube Type B, Elbow, For Use With Type 100R2 Double Wire Braid Hose (S/S By Mil-F-52525/11 Now Mil-Dtl-52525/11)
MIL-F-52525/29 - Fittings, Wire Reinforced Hydraulic Hose And Clamp-Halves: Field Attachable (Reuseable), Clamp-On To 4-Bolt Split-Flange, 90 Degrees Bent Tube, Short Drop, Type B, Elbow, For Use With Type 100R2 Double Braid Hose (S/S By Mil-F-52525/12)
MIL-F-52525/30 - Fittings, Wire Reinforced Hydraulic Hose And Clamp-Halves: Field Attachable (Reusable), Clamp-On To 4-Bolt Split-Flange, 90 Degrees, Bent Tube, Long Drop, Type B, Elbow, For Use With Type 100R2 Double Braid Hose
MIL-F-5506 - Fitting, Method Of Testing Tube
MIL-F-5509 - Fitting, Flared Tube, Fluid Connection (See Notice 2 For Additional Superseding Information)
This specification establishes the requirements for flared tube, pipe threaded and beaded type fluid connection fittings for use in all types of fluid systems. (see 6.1)
MIL-F-83798/10 - Fitting, Rubber Hose, Lightweight, Medium Pressure (Nipple Subassembly, Flared, Swivel Nut, Straight)
MIL-F-83798/11 - Fitting, Rubber Hose, Lightweight, Medium Pressure, (Nipple Subassembly, Flared, Swivel Nut, 45 Degrees)
MIL-F-83798/12 - Fitting, Rubber Hose, Lightweight, Medium Pressure (Nipple Subassembly, Flareless, Swivel Nut, 90 Degrees)
MIL-F-83798/13 - Fitting, Rubber Hose, Lightweight, Medium Pressure (Nipple Subassembly, Flareless, Swivel Nut, Straight)
MIL-F-83798/14 - Fitting, Rubber Hose, Lightweight, Medium Pressure, (Nipple Subassembly, Flareless Swivel Nut, 45 Degrees)
MIL-F-83798/15 - Fitting, Rubber Hose, Lightweight, Medium Pressure, (Nipple Subassembly, Swivel Nut, 90 Degrees)
MIL-F-83798/16 - Fitting, Rubber Hose, Lightweight, Medium Pressure (Nipple Subassembly, Swivel Flange Straight)
MIL-F-83798/17 - Fitting, Rubber Hose, Lightweight, Medium Pressure, (Nipple Subassembly, Swivel Flange, 45 Degrees)
MIL-F-83798/18 - Fitting, Rubber Hose, Lightweight, Medium Pressure, (Nipple Subassembly, Swivel Flange, 90 Degrees)
MIL-F-83798/19 - Fitting, Rubber Hose, Lightweight, Medium Pressure, (Nipple, Flared, Swivel Nut, Straight)
MIL-F-83798/20 - Fitting, Rubber Hose, Lightweight, Medium Pressure, (Nipple, Flared, Swivel Nut, 45 Degrees)
MIL-F-83798/21 - Fitting, Rubber Hose, Lightweight, Medium Pressure, (Nipple, Flared, Swivel Nut, 90 Degrees)
MIL-F-83798/22 - Fitting, Rubber Hose, Lightweight, Medium Pressure, (Nipple Flareless, Swivel Nut, Straight)
MIL-F-83798/23 - Fitting, Rubber Hose, Lightweight, Medium Pressure, (Nipple, Flared, Swivel Nut, 45 Degrees)
MIL-F-83798/24 - Fitting, Rubber Hose, Lightweight, Medium Pressure, (Nipple, Flareless, Swivel Nut, 90 Degrees)
MIL-F-83798/25 - Fitting, Rubber Hose, Lightweight, Medium Pressure, (Nipple, Swivel Flange, Straight)
MIL-F-83798/26 - Fitting, Rubber Hose, Lightweight, Medium Pressure, (Nipple, Swivel Flange, 45 Degrees)
MIL-F-83798/27 - Fitting, Rubber Hose, Lightweight, Medium Pressure, (Nipple, Swivel Flange, 90 Degrees)
MIL-F-83798/28 - Fitting, Rubber Hose, Lightweight, Medium Pressure, (Socket)
MIL-F-83798/29 - Fitting, Rubber Hose, Lightweight, Medium Pressure, (Sleeve Insert)
MIL-F-85421 - Fittings, Tube, Fluid Systems, Separable, Beam Seal, 3000/4000 Psi, General Specification For (S/S By Sae-As85421)
This specification covers the design requirements and test procedures for separable beam seal fittings which includes end fittings, fitting bodies, and boss fittings for use in aerospace fluid systems.
MIL-F-85421/10 - Fitting, Adapter, Beam Seal, 3000/4000 Psi, Male To Flareless (S/S By Sae-As85421/10)
MIL-F-85421/11 - Fitting, Union, Beam Seal, 3000/4000 Psi, Male Ends (S/S By Sae-As85421/11)
MIL-F-85421/12 - Fitting, Elbow, 90 Deg., Beam Seal, 3000/4000 Psi, Male To Male (S/S By Sae-As85421/12)
MIL-F-85421/13 - Fitting, Elbow, 90 Deg., Beam Seal, 3000/4000 Psi, Bulkhead, Male Ends (S/S By Sae-As85421/13)
MIL-F-85421/14 - Fitting, Elbow, 90 Deg., Beam Seal, 3000/4000 Psi, Male To Female (S/S By Sae-As85421/14)
MIL-F-85421/15 - Fitting, Elbow, 45 Deg., Beam Seal, 3000/4000 Psi, Bulkhead, Male Ends (S/S By Sae-As85421/15)
MIL-F-85421/16 - Fitting, Tee, Beam Seal, 3000/4000 Psi, Bulkhead On Run, Male Ends (S/S By Sae-As85421/16)
MIL-F-85421/17 - Fitting, Tee, Beam Seal, 3000/4000 Psi, Bulkhead On Branch, Male Ends (S/S By Sae-As85421/17)
MIL-F-85421/3 - Fitting, Tee, Reducer, Beam Seal, 3000/4000 Psi, 3 Male Ends (S/S By Sae-As85421/3)
MIL-F-85421/4 - Fitting, Tee, Reducer And Non-Reducer, Beam Seal, 3000/4000 Psi, Male On Run, Swivel Nut On Branch (S/S By Sae-As85421/4)
MIL-F-85421/5 - Fitting, Tee, Reducer And Non-Reducer, Beam Seal, 3000/4000 Psi, Male On Run And Branch, Swivel Nut On Run (S/S By Sae-As85421/5)
MIL-F-85720 - Fitting, Tube, Fluid Systems, Separable, High Pressure, Dynamic Beam Seal, General Specification For (S/S By Sae-As85720)
MIL-F-85720/1 - Fittings, Tube, Fluid Systems, Separable, High Pressure, Dynamic Beam Seal, Design Standard For Male End (S/S By Sae-As85720/1)
MIL-F-8839 - Fittings, Lubrication Drive Type
This specification covers drive-type lubrication fittings for maintenance use only and is not intended for new design.
MIL-G-15383 - Guns, Lubricating, Pressure, Hand-Operated, And Fittings (Shipboard Use) (S/S By Mil-F-3541)
MIL-H-62165/3 - Hose Fittings, Reusable, For Non Metallic Thermoplastic Hose
MIL-I-24063 - Insert Sets, Sound Isolation For Risic Risic-1 Flexible Connectors
This specification covers elastomeric inserts used with rubber insert sound isolation coupling (RISIC-1) flexible connectors.
MIL-I-24783 - Isolator, Ring Type, Pressure, For Shipboard Sewage Service
This specification covers the requirements for ring and flanged spool type isolators, installed between pipe flanges, to isolate pressure and vacuum gauges from clogging by sediment and solids in shipboard sewage systems.
MIL-J-26870 - Joint, Swivel, Aircraft Fuel
This specification covers aircraft fuel swivel joints.
MIL-J-2948 - Joint, Steel, Flexible (For Temporary Pipe Connections
MIL-M-11726 - Manifold, Air Line; One To Seven Outlets
MIL-M-27386 - Manifold Assemblies, Hose-Line: Fueling: 4-Inch, Quick-Coupling Type
MIL-M-28608 - Mender, Hose
MIL-M-52107 - Manifold, Fuel, Bulk Transfer, Quick Disconnect Cam-Locking Connections (Use Mil-M-82002)
MIL-N-17752 - Nozzle, Spray, Water Cooling
MIL-N-22602 - Nozzle, Abrasive Blast, Venturi Type
This specification covers abrasive blast nozzles of the venturi type.
MIL-N-25087 - Nipple, Emergency Oxygen Cylinder Valve, Breakoff (S/S By Mil-V-7560)
MIL-N-25556 - Nozzle, Fill And Vent, Fuming Nitric Acid Servicing
MIL-N-7364 - Nozzle, Oil Servicing, Pistol Grip, Non Drip, Type A&3A
MIL-P-10388 - Pipe Fittings: One Or More Ends Grooved (S/S By A-A-52592)
This specification covers grooved - and combination - type pipe fittings.
MIL-P-14351 - Pipeline Barrel, Cleaner Trap: Incoming And Outgoing
MIL-P-15742 - Plug, Plastic (Heat-Exchanger Tube) (S/S By A-A-59949)
This specification covers heat-exchanger-tube plugs which are driven into both ends of leaking condenser or other heat-exchanger-tubes to prevent contamination of the fluid surrounding the tubes.
MIL-P-18174 - Pipe Fitting, Steel, Threaded 2000, 3000, & 6000 Pound, Wog Use Ansi B16.11
MIL-P-18178 - Pipe Bends, Fabricated (For Shore Use)
MIL-P-18501 - Pipe And Fittings, Steel, Lightweight, Spiral And Longitudinal Welded Seam
MIL-P-18901 - Plug, Protective And Preservative, Plastic (For Internal Threads)
MIL-P-22011 - Pipe Fitting, Plastic, Rigid, Unplasticized, High Impact, Polyvinylchloride
MIL-P-54001 - Plug, Pipe, Magnetic, Headless, Iron, Steel Or Aluminum Alloy (S/S By A-A-59432)
MIL-PRF-12386 - Clamp, Repair, Pipe: With Fuel-Resistant Gasket
This specification covers two types of clamps one for split application and the other for pinhole application over damaged petroleum pipelines.
MIL-PRF-13789 - Strainers, Sediment: Pipeline, Basket Type
This specification covers single element basket-type sediment strainers from 0.75 to 12.00-inch nominal pipe size, for the removal of foreign material from fuel and oil service lines.
MIL-PRF-20042 - Flange, Pipe , Bronze (Silver Brazing)
This specification covers 50, 100, 150, 250, and 400 pound silver brazing bronze pipe flanges for use with water, oil, gas, or steam service not to exceed 425 degrees Fahrenheit ( F).
MIL-PRF-25676 - Adapter, Pressure Lubricating Oil Servicing, Aircraft (S/S By Mil-Dtl-25677)
This specification covers an adapter installed in an aircraft turbine engine lubricating oil system as a connection for ground servicing with pressure lubricating oil servicing equipment, using synthetic lubricating and preservative oil.
MIL-R-11521 - Ring, Expansion, Hose, Brass (S/S By A-A-55535)
MIL-R-17882 - Repair Kits, Metallic Pipe And General Purpose, Damage Control
This specification covers repair kits for metallic pipe and general purpose damage control use.
MIL-S-10385 - Sandtrap Assembly (For Portable 6-Inch Petroleum Pipeline)
This specification covers a sandtrap assembly for use in portable pipeline pumping station manifolds.
MIL-S-12165 - Strainer, Suction, Fire Hose, And Strainers, Suction, Hose
This specification covers firehose and water hose strainers to be attached to the intake end of a suction hose.
MIL-S-15573 - Strainers, Sediment, Pipeline (For Gasoline Service)
MIL-S-16293 - Strainers, Sediment: Pipeline, Water, Air, Gas, Oil Or Steam (S/S By Ww-S-2739)
This specification covers removable basket-and-screen-strainers of various sizes for use in water, air, gas, oil, or steam pipe lines, as specified (see 6.2 and 6.4), to remove dirt, scale particles, and other foreign matter.
MIL-S-17635 - Separators And Purifiers, Steam, Pipeline And Receiver
MIL-S-17849 - Strainers, Sediment, Pipeline, Duplex (With And Without Magnet)
This specification covers duplex strainers for use in lubricating, diesel, fuel oil and sea water cooling systems.
MIL-S-19901 - Spool Pieces (For Submarine Fuel Loading Line)
MIL-S-21427 - Strainer, Assemblies, Main Steam, High Pressure (Sizes 4 Inches And Above)
This specification covers high pressure steam strainer assemblies in sizes 4 inches and above intended primarily for main steam systems, for protection of power equipment and throttle valves from dirt, sediment, pipe scale and foreign objects.
MIL-S-22833 - Strainers, Sediment, Refrigerant 12
This specification covers noncleanable, screen-type, straight-through strainers for use with refrigerant 12 (dichlorodifluoromethane).
MIL-S-27661 - Strainer, Sediment, Jet Fuel Unit, 600 Gpm
MIL-S-28678 - Strainer, Steam, Bronze Body, 250 Psi, Silver Brazed Socket Connection (See Notice 1 For Replacement Information)
MIL-S-2953 - Strainers, Steam (Sizes 3 Inches And Below)
This specification covers basket-type steam strainers in sizes 3 inch and below.
MIL-S-416 - Strainer, Well, Water, Wire-Wound
This specification covers 10-foot long, wire-wound, telescopic type strainers used in connection with water-well construction.
MIL-STD-1330 - Precision Cleaning And Testing Of Shipboard Oxygen, Helium, Helium-Oxygen, Nitrogen, And Hydrogen Systems
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business