DETAIL SPECIFICATION SHEET CUPS, GREASE, MANUAL FEED
Inactive for new design after 5 April 1999.
INCH-POUND
MS35758D
30 August 2012
SUPERSEDING MS35758C
23 January 2008
This specification is approved for use by all Departments and
Agencies of the Department of Defense.
The requirements for this product described herein shall consist of this specification sheet and
MIL-C-1213.
B B
C C
LEATHER WASHER
METAL WASHER A
LEATHER WASHER
METAL WASHER
A
OPTIONAL DESIGN (WITHOUT RATCHET)
Dash numbers |
Grease capacity ounce |
A Thread |
B max OD inch (mm) |
C max Overall length inch (mm) |
||
Steel |
Brass |
|||||
Uncoated |
Plated |
Uncoated |
||||
-1 |
-4 |
-7 |
.25 |
.125 -27 NPT |
1.125 (28.58) |
1.625 (41.28) |
-2 |
-5 |
-8 |
.50 |
.125 -27 NPT |
1.250 (31.75) |
1.875 (47.63) |
-3 |
-6 |
-9 |
1.0 |
.250 -18 NPT |
1.875 (47.63) |
2.500 (63.50) |
----- |
----- |
-10 |
2.0 |
.375 -18 NPT |
2.250 (57.15) |
2.875 (73.03) |
----- |
----- |
-11 |
3.5 |
.500 -14 NPT |
2.750 (69.85) |
1.250 (31.75) |
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for information only.
3. Unless otherwise specified, the tolerance for 3 place decimals is ± .005 inch (0.13 mm).
4. Threads shall be in accordance with FED-STD-H28/7, FED-STD-H28/8, ASME B1.20.1 and
ASME B1.20.3.
5. The illustration is for identification only and is not intended to restrict design or shapes not dimensioned.
FIGURE 1. Cups, grease, manual feed.
AMSC N/A FSC 4730
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business