INCH-POUND
MIL-DTL-85061C
07 January 2009
SUPERSEDING
MIL-C-85061B
w/AMENDMENT 2
22 September 1986
DETAIL SPECIFICATION
COUPLING, FUEL LINE, FLEXIBLE, 125 PSI
Inactive for new design after 07 January 2009. For new design, use SAE-AS5356.
This specification is approved for use by all Departments and Agencies of the Department of
Defense.
1. SCOPE
1.1 Scope. This specification covers flexible couplings for joining tubing with SAE-
AS5131 style A beaded ends for use in aircraft fuel and vent systems (see 6.1).
1.2 Classification. Coupling materials and sizes are as specified in table I and table II.
1.2.1 Part or Identifying number (PIN). The part or identifying number to be used for
couplings acquired to this specification is identified as follows:
-XX
-X
M85061
Material code letter (see 1.2.3 and table I)
Size dash number (see table II)
Military specification number
Comments, suggestions, or questions on this document should be addressed to the Naval Air
Systems Command, Attention: Code 4L8000B120-3, Highway 547, Lakehurst, NJ 08733-5100
or emailed to michael.sikora@navy.mil. Since contact information can change, you may want to
verify the currency of this address information using the ASSIST online database at
https://assist.daps.dla.mil.1-10-B = 0.625 tube coupling with CRES material
AMSC N/A
FSC 4730
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business