INCH POUND
MIL-PRF-25676E
5 MAY 1997
SUPERSEDING
MIL-A-25676D (ASG)
17 OCTOBER 1986
PERFORMANCE SPECIFICATION
ADAPTER, PRESSURE LUBRICATING OIL SERVICING, AIRCRAFT
This specification is approved for use by the Department of the Air Force and is available
for use by all Departments and agencies of the Department of Defense.
1.
SCOPE
1.1
Scope. This specification covers an adapter installed in an aircraft turbine
engine lubricating oil system as a connection for ground servicing with pressure lubricating oil
servicing equipment, using synthetic lubricating and preservative oil.
1.2
Classification. Pressure lubricating oil servicing adapters will be in the sizes
specified in MS24476 (see 6.2).
1.2.1
Types. The types of adapters are as follows:
Type I
MS24476-1,
inch size.
Type 2
MS24476-2,
inch size.
2.
APPLICABLE DOCUMENTS
2.1
General. The documents listed in this section are cited in section 3 and 4 of this
specification. This section does not include documents cited in other sections of this
specification or recommended for additional information or as examples. While every effort
has been made to ensure the completeness of this list, document users are cautioned that they
must meet all specified requirements documents cited in sections 3 and 4 of this specification,
whether or not they are listed.
Beneficial comments (recommendations, additions, deletions) and any pertinent data which
may be of use in improving this document should be addressed to: the Resources and
Logistics Services Division, SA-ALC/TILDD, 485 Quentin Roosevelt Rd., Bldg 171, Kelly
AFB, TX 78241-6524 by using the Standardization Document Improvement Proposal (DD
Form 1426) appearing at the end of this document or by letter.
AMSC N/A
FSC 4730
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business