INCH-POUND
MS27064E
14 January 2014 SUPERSEDING MS27064D
24 September 2003
DETAIL SPECIFICATION SHEET
ELBOW SUBASSEMBLY, SWIVEL FLANGE, 45°
This specification sheet is approved for use by all Departments and Agencies of the Department of Defense.
The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-27272.
NOTES:
1. Dimension A, see table II, is measured between the hose end of the threaded section of the union and the free end of the insert at its centerline.
2. Dimension B, see table II, is measured between the centerline of the nipple and the free end of the insert at its centerline.
3. Any bent tube design of subassembly components to the left of plane A-A is acceptable
provided that the requirements of this specification sheet and the procurement specification are met.
FIGURE 1. Elbow subassembly illustration.
AMSC N/A FSC 4730
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business