DETAIL SPECIFICATION SHEET ADAPTER ASSEMBLY, FLARED, STRAIGHT,
TUBE TO HOSE - WITH SWIVEL NUT
This specification sheet is approved for use by all Departments and Agencies of the Department of Defense.
INCH-POUND
MS27053E
14 March 2013 SUPERSEDING MS27053D
25 September 2003
The requirements for acquiring the product described
herein shall consist of this specification sheet and MIL-DTL-27272.
NOTES:
1. Dimension A, see table II, is the dimension between the hose end of the adapter and the free end of the insert at its centerline when the socket is assembled on the nipple subassembly.
2. Lockwire holes if required in accordance with SAE-AS1043.
3. Socket may be hex or 2-flat-sides.
FIGURE 1. Adapter assembly illustration.
AMSC N/A FSC 4730
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business