COMMERCIAL ITEM DESCRIPTION COUPLING ASSEMBLIES AND MENDERS, HOSE
The General Services Administration has authorized the use of this commercial item description by all federal agencies.
1. SCOPE. This commercial item description (CID) covers the general requirements for coupling assemblies and menders, hose. Coupling assemblies and menders, hose covered by this CID are intended for commercial/industrial applications.
1. SCOPE. This commercial item description (CID) covers the general requirements for coupling assemblies and menders, hose. Coupling assemblies and menders, hose covered by this CID
are intended for commercial/industrial applications.
2. CLASSIFICATION/PART OR IDENTIFICATION NUMBER (PIN). This CID uses a classification system which is included in the PIN as shown in the following examples (see 7.1).
AA2921 C 1 A
CID number Type Class Size
2.1 Types, classes and sizes. The coupling assemblies and menders shall be of the type, class and size as specified.
Type.
I - (Coupling) Code C II - (Mender) Code M
Class.
1 - Non-reusable Code 1
2 - Reusable Code 2
Size.
A - 5/8 Code A B - 3/4 Code B
Beneficial comments, recommendations, additions, deletions, clarifications, etc., and any data that may improve this document should be sent to: DLA Land and Maritime, ATTN: VAi, P.O. Box 3990, Columbus OH 43218-3990, or email fluidflow@.dla.mil. Since contact information can change you may want to verify the currency of the address information using the ASSIST Online database at https://assist.dla.mil.
AMSC A/C FSC 4730
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business