INCH-POUND WW-P-460E
15 December 2009
SUPERSEDING WW-P-460D
28 February 1994
FEDERAL SPECIFICATION
PIPE FITTINGS; BRASS OR BRONZE (THREADED), CLASSES 125 AND 250 POUND
The General Services Administration has authorized the use of this federal specification, by all Federal agencies.
1. SCOPE AND CLASSIFICATION
1.1 Scope. This specification covers threaded pipe fittings made of brass or bronze, classes 125 and 250. Certain requirements also pertain to wrought or cast plugs, bushings, couplings, and caps.
1.2 Classification. Fittings are to be furnished in the size and pressure rating designated by the applicable detail specification sheet, as specified.
2. APPLICABLE DOCUMENTS
2.1 Government publications. The following documents, of the issues in effect on the date of invitation for bids or request for proposal, form a part of this specification to the extent specified herein:
Detail Specification Sheet
MS14305 - Fittings, Pipe, Brass or Bronze, Threaded (Tees, Crosses, 45-Deg. Elbows, and
Couplings), Class 125
MS14306 - Fittings, Pipe, Brass or Bronze, Threaded (Reducers, Close and Open Return Bends, and
45-Deg. Y-Branches), Class 125
MS14307 - Elbows, Pipe, Brass or Bronze, Threaded, 45-Deg., Street, Class 125
MS14308 - Elbows, Pipe, Brass or Bronze, Threaded, 90-Deg., Reducing, Class 125
MS14309 - Tees, Pipe Brass or Bronze, Threaded, Reducing, Class 125
MS14310 - Caps, Pipe, Brass or Bronze, Threaded, Class 125
MS14311 - Fittings, Pipe, Brass or Bronze Threaded (90-Deg. Elbows, Tees, Crosses,
45-Deg. Elbows, and Couplings), Class 250
MS14312 - Elbows, Pipe, Brass or Bronze, Threaded, 90-Deg., Reducing, Class 250
MS14314 - Plugs, Pipe, Brass or Bronze, Threaded (Square Head and Square Socket), Classes 250 and 125
MS51845 - Elbows, Pipe, Brass or Bronze, Threaded, 90-Deg., Straight, Class 125
(Copies of military specifications and standards required by contractors in connection with specific procurement functions are obtained from the Standardization Documents Order Desk, Building 4D, 700 Robbins Avenue, Philadelphia, PA 19111-5094 or available online at https://assist.daps.dla.mil/quicksearch.)
Beneficial comments, recommendations, additions, deletions, clarifications, etc. and any data that may improve this document should be sent to: Defense Supply Center, Columbus, DSCC-VAI, 3990 East Broad Street, Columbus, OH 43218-5000, or emailed to, FluidFlow@dscc.dla.mil. Since contact information can change, you may want to verify the currency of this address information using the ASSIST Online at https://.daps.dla.mil.
AMSC N/A FSC 4730
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business