INCH-POUND
MS27381C
1 May 2013 SUPERSEDING MS27381B
25 September 2003
DETAIL SPECIFICATION SHEET
ADAPTER ASSEMBLY, FLARELESS, STRAIGHT, TUBE TO HOSE - WITH SWIVEL NUT
This specification sheet is approved for use by all Departments and Agencies of the Department of Defense.
The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-27272.
NOTES:
1. Dimension A, see table II, is measured between the hose end of the socket and the free end of the radius MS8000 series seal insert at its centerline when the socket is assembled on the nipple subassembly (see MIL-DTL-25579/1 for conversion if NAS1760 style ends are used).
2. Socket may be either hex or 2-flat sides.
3 If required, lockwire holes to be drilled in accordance with SAE-AS1043.
FIGURE 1. Adapter assembly illustration.
AMSC N/A FSC 4730
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business