MIL-STD-1330 Precision Cleaning And Testing Of Shipboard Oxygen, Helium, Helium-Oxygen, Nitrogen, And Hydrogen SystemsThis standard provides the requirements for precision cleaning and testing of oxygen or oxygen-enriched systems and components; oxygen generating plants including nitrogen, hydrogen, and demineralized water support systems and components; and helium, helium-oxygen, and hydrogen life support systems and components. Each activity will implement the applicable requirements of this document through a locally prepared and approved procedure. Activities subject to additional quality assurance requirements such as NAVSEA SS800-AG-MAN-010/P-9290 or NAVSEA SS521-AA-MAN-010 will obtain procedure approval from the applicable certifying activity.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42 - 43 - 44 - 45 - 46 - 47 - 48 - 49 - 50 - 51 - 52 - 53 - 54 - 55 - 56 - 57 - 58 - 59 - 60 - 61 - 62 - 63 - 64 - 65 - 66 - 67 - 68 - 69 - 70 - 71 - 72 - 73 - 74 - 75 - 76 - 77 - 78 - 79 - 80 - 81 - 82 - 83 - 84 - 85 - 86 - 87 - 88 - 89 - 90

MIL-STD-1330D(SH)

w/ Change 1

6.3.2  Several referenced documents within Appendix A of this standard are known to be officially withdrawn at the time of this revision's approval.  Since these documents are still in common use within commercial practice and industry, the official status of these publications should not affect the intent of this specification.  Additionally, three documents that have been officially withdrawn at the time of this revision's approval are still in common use within commercial practice and industry; and continued use is technically acceptable.  FED-STD-209, Airborne Particulate Cleanliness Classes in Cleanrooms and Clean Zones, has been cancelled and replaced by ISO-14644 (reference Section 5.1).  However, FED-STD-209 Class 100,000 (or better) clean rooms for critical applications are technically acceptable alternatives to ISO-14644.  MIL-STD-1246 has been cancelled and replaced by IEST-STD-CC1246 (reference Section 5.13).  However, particle counts in accordance with MIL-STD-1246, Product Cleanliness Levels and Contamination Control Program, for critical applications are technically acceptable alternatives to IEST-STD- CC1246.  ASTM D930, Standard Test Method of Total Immersion Corrosion Test of Water Soluble Aluminum Cleaners, has been cancelled without replacement (Reference Appendix A).  For historical purposes, ASTM D930 was used to evaluate the corrosion resistance of all aqueous cleaners with aluminum.

6.4  Safety precautions.  If an oxygen monitor with alarm is used as specified in 4.7.1, it should be in accordance with OPNAVINST 5100.19.

6.5  Subject term (key word) listing. Halogenated solvent

Helium

Hydrogen

Isopropyl alcohol

Navy oxygen cleaner (NOC) Oxygen

Oxygen clean

Trisodium phosphate

6.6  Change notations.  The margins of this standard are marked with vertical lines to indicate modifications generated by this change.  This was done as a convenience only and the Government assumes no liability whatsoever for any inaccuracies in these notations.  Bidders and contractors are cautioned to evaluate the requirements of this document based on the entire content irrespective of the marginal notations.

1/

Name:         

2/

Date:         

CERTIFIED  OXYGEN  CLEAN  MIL-STD-1330

WARNING:  DO  NOT  OPEN  UNTIL  READY  FOR  USE

3/                                                        4/

Final  Cleaner:         

Control  No:          

FIGURE 1.  Typical certification sticker. 5/

45