MIL-STD-1330-SUP-2 Precision Cleaning and Testing of Shipboard Oxygen, Helium, Helium-Oxygen, Nitrogen, and Hydrogen SystemsThis standard provides the requirements for precision cleaning and testing of oxygen or oxygen-enriched systems and components; oxygen generating plants including nitrogen, hydrogen, and demineralized water support systems and components; and helium, helium-oxygen, and hydrogen life support systems and components. Each activity will implement the applicable requirements of this document through a locally prepared and approved procedure. Activities subject to additional quality assurance requirements such as NAVSEA SS800-AG-MAN-010/P-9290 or NAVSEA SS521-AA-MAN-010 will obtain procedure approval from the applicable certifying activity.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42 - 43 - 44 - 45 - 46 - 47 - 48 - 49 - 50 - 51 - 52 - 53 - 54 - 55 - 56 - 57 - 58 - 59 - 60 - 61 - 62 - 63 - 64 - 65 - 66 - 67 - 68 - 69 - 70 - 71 - 72 - 73 - 74 - 75 - 76 - 77 - 78 - 79 - 80 - 81 - 82

MIL-STD-1330D(SH)

20 September 1996

oil, and should also protect the material from temperature extremes of below 40EF and above 100EF.  The certification sticker or tag shall be attached so as to be visible for inspection.

5.16.3.2  Inspection of packaging.  Prior to use or transport, the packaging of all certified oxygen clean materials shall be inspected.  If the outer package is torn or damaged, but the inside package is intact, replace the outer package. If the inside package is torn or damaged exposing the oxygen cleaned surface to the ambient atmosphere, the item shall be recleaned and recertified as specified herein.  An exception is high valued items such as valves, regulators, and

compressors of which local engineering approval to use 5.12 shall be obtained (see

6.3).  For shipboard storage, the packaging of all certified oxygen clean material

should be inspected every 3 years to ensure ready spares are available.

5.17  In-process inspections.

5.17.1  Inspection.  When required by table XII, an inspector or witness shall observe the applicable operation for compliance with this standard.  The witness or inspectors shall be designated by the local activity.

TABLE XII.  In-process operation inspections.

See footnotes at end of table.

46