MIL-STD-1330D(SH)
20 September 1996
1.2.4 Equipment which comes in contact with or is used to transfer any fluid from its source to a system or component within any of the boundaries defined in
1.2.1, 1.2.2, and 1.2.3 when such interface is intended to maintain the cleanliness requirements specified herein.
1.2.5 Open ended applications constructed of material that is configured and operated at a pressure that represents a fire hazard in the presence of an oxygen or oxygen-enriched atmosphere when determined in accordance with the guidelines of ASTM G 63 and ASTM G 94. For open-ended piping or configurations constructed of material and operated in an oxygen or oxygen-enriched atmosphere at a pressure
that does not propagate a flame when determined in accordance with the guidelines of ASTM G 63 and ASTM G 94, clean in accordance with MIL-STD-1622 for diver applications; otherwise use best commercial practice to remove loose scale, dust, grit, filings, oil, and grease. For information, copper, copper-nickel, bronze, brass, and monel will not propagate a flame in an oxygen or oxygen-enriched atmosphere at pressures up to 7500 pounds per square inch (lb/in2).
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections
3, 4, and 5 of this standard. This section does not include documents cited in
other sections of this standard or recommended for additional information or as
examples. While every effort has been made to ensure the completeness of this
list, document users are cautioned that they must meet all specified requirements
of documents cited in sections 3, 4, and 5 of this standard, whether or not they
are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are those listed in the issue of the Department of Defense Index of Specifications and Standards (DoDISS) and supplement thereto, cited in the solicitation (see 6.2).
SPECIFICATIONS FEDERAL
A-A-58020 - Drums, Shipping, Steel with Polyethylene Insert.
L-P-378 - Plastic Sheet and Strip, Polyolefin.
O-S-642 - Sodium Phosphate, Tribasic, Anhydrous;
Dodecahydrate; and Monohydrate; Technical.
BB-N-411 - Nitrogen, Technical.
TT-I-735 - Isopropyl Alcohol.
ZZ-R-710 - Rubber Gasket Material, 35 Durometer Hardness.
DEPARTMENT OF DEFENSE
MIL-S-8660 - Silicone Compound, NATO Code Number S-736.
MIL-D-16791 - Detergents, General Purpose (Liquid, Nonionic).
MIL-B-22191 - Barrier Materials, Transparent, Flexible, Heat-
Sealable.
MIL-F-22606 - Flask Compressed Gas and End Plugs for Air, Oxygen
and Nitrogen.
MIL-G-24139 - Grease, Multipurpose, Water Resistant.
MIL-C-24671 - Cloth, Lint-Free, Flushing and Cleaning.
MIL-L-25567 - Leak Detection Compound, Oxygen Systems. (Metric)
MIL-P-27407 - Propellant Pressurizing Agent Helium.
MIL-G-27617 - Grease, Aircraft and Instrument, Fuel and Oxidizer
Resistant.
MIL-DTL-24800 - Cleaning Compound - Aqueous - Oxygen Systems
Components.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business