MIL-DTL-8783D
SAE-AMS5513
-
Steel, Corrosion Resistant, Sheet, Strip, and Plate 19Cr - 9.2Ni
(SAE 30304) Solution Heat Treated
SAE-AMS5516
-
Steel, Corrosion-Resistant, Sheet, Strip, and Plate 18Cr - 9.0Ni
(SAE 30302) Solution Heat Treated
SAE-AMS5518
-
Steel, Corrosion Resistant, Sheet and Strip 18Cr - 8Ni (SAE
30301) Cold Rolled, 150 ksi (1034 MPa) Tensile Strength
SAE-AMS5639
-
Steel, Corrosion-Resistant, Bars, Wire, Forgings, Tubing, and
Rings 19Cr - 10Ni Solution Heat Treated
SAE-AMS5732
-
Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings,
Tubing, and Rings 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V
Consumable Electrode Melted 1800 Degrees F (982 Degrees C)
Solution and Precipitation Heat Treated
SAE-AMS5737
-
Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, and
Tubing 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V
Consumable Electrode Melted 1650 Degrees F (899 Degrees C)
Solution and Precipitation Heat Treated
SAE-AMS5902
-
Steel, Corrosion-Resistant, Sheet and Strip 18Cr 8Ni (SAE
30301) Cold Rolled, 3/4 Hard, 175 ksi (1207 MPa) Tensile
Strength
SAE-AS7479
-
Bolts and Screws, Steel, UNS S66286 1650 Degrees F Solution
Heat Treated Precipitation Heat Treated Before Roll Threaded
SAE-AS8879
-
Screw Threads - UNJ Profile, Inch
(Copies of these documents are available online at https://www.sae.org or from the SAE World
Headquarters, 400 Commonwealth Drive, Warrendale, PA 15096-0001.)
2.4 Order of precedence. Unless otherwise noted herein or in the contract, in the event of a conflict
between the text of this document and the references cited herein (except for related specification
sheets), the text of this document takes precedence. Nothing in this document, however, supersedes
applicable laws and regulations unless a specific exemption has been obtained.
3. REQUIREMENTS
3.1 Specification sheets. The individual item requirements shall be as specified herein and in
accordance with the applicable specification sheet. In the event of any conflict between the requirements
of this specification and the specification sheet, the latter shall govern.
3.2 Qualification. The flat band hose clamps furnished under this specification shall be products that
are authorized by the qualifying activity for listing on the applicable qualified products list before contract
3.3 Materials. Materials shall be as identified herein. Materials not specified shall be selected by the
contractor and shall be subject to all provisions of this specification.
3.3.1 Recycled, recovered, or environmentally preferable material. Recycled, recovered, or
environmentally preferable materials should be used to the maximum extent possible provided that the
material meets or exceeds the operational and maintenance requirements, and promotes economically
advantageous life cycle costs.
3.3.2 Clamp band. Clamp bands shall be corrosion resistant steel alloy 301, 1/2 hard in accordance
with SAE-AMS5518.
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business