MIL-DTL-8783D
SEPARATE T-BOLT AND TRUNNION
Inches
mm
.030
0.76
.040
1.02
.075
1.91
6.00
152.40
NOTES:
1. Dimensions in inches.
2. Metric equivalents are given for general information only.
3. A - This distance determined from assembly on min bar or tube in accordance with 4.7.2.
4. B - Center clamp on plate by making these dimensions equal within .06 inch (1.52 mm).
FIGURE 1. Test setup for load deflection - Continued.
4.7.4 Band tensile load. The tensile load test shall be conducted on the same or similar specimens
5. PACKAGING
5.1 Packaging. For acquisition purposes, the packaging requirements shall be as specified in the
contract or order (see 6.2). When packaging of material is to be performed by DoD or in-house contractor
personnel, these personnel need to contact the responsible packaging activity to ascertain packaging
requirements. Packaging requirements are maintained by the Inventory Control Point's packaging activity
within the Military Service or Defense Agency, or within the Military Service's System Commands.
Packaging data retrieval is available from the managing Military Department's or Defense Agency's
automated packaging files, CD-ROM products, or by contacting the responsible packaging activity.
6. NOTES
(This section contains information of a general or explanatory nature which may be helpful, but is not
mandatory.)
6.1 Intended use. These are military unique clamps that require strict adherence to military
requirements. The clamps are for use in military aircraft installation in making duct or tube connections
and in other applications requiring a flat metallic band with an adjustment feature. The clamps meet the
strict temperature range of -65F to 500F (-54°C to 260°C), which complies with detailed military
requirements. These clamps are not intended for use in pressurized lines carrying combustibles.
10
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business