MIL-DTL-8783D
DEPARTMENT OF DEFENSE STANDARD
MIL-STD-130
Identification Marking of U.S. Military Property
-
DEPARTMENT OF DEFENSE SPECIFICATION
Clamp, Hose, Flat Band 500F
MIL-DTL-8783/1
-
(Copies of these documents are available online at https://assist.daps.dla.mil or from the Standardization
Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)
2.3 Non-Government publications. The following documents form a part of this document to the extent
specified herein. Unless otherwise specified, the issues of these documents are those cited in the
solicitation or contract.
AMERICAN WELDING SOCIETY (AWS)
AWS D17.2/D17.2M -
Specification for Resistance Welding for Aerospace
Applications
(Copies of these documents are available online at https://www.aws.org or from the American Welding
Society, 550 N.W. LeJeune Road, Miami, Florida 33126-5649)
AEROSPACE INDUSTRIES ASSOCIATION (AIA)
NASM7873
-
Nut, Self-Locking, 1,200 Degrees Fahrenheit
(Copies of these documents are available online at https://www.aia-aerospace.com or from the
Aerospace Industries Association, 1000 Wilson Boulevard, Suite 1700, Arlington, VA 22209-3901).
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION (ISO)
ISO 17025
-
General requirements for the competence of testing and calibration
laboratories
(Copies of these documents are available online at https://www.iso.ch or from the International
nd
th
Organization for Standardization American National Standards Institute, 11 West 42 Street, 13 Floor,
New York, NY 10036.)
NCSL INTERNATIONAL
NCSL Z540.3
-
Requirements for the Calibration of Measuring and Test Equipment
(Copies of these documents are available online at https://www.ncsli.org or from NCSL International
2995 Wilderness Place, Suite 107 Boulder, Colorado 80301-5404)
SAE INTERNATIONAL
SAE-AMS2700
-
Passivation of Corrosion Resistant Steels
SAE-AMS5504
-
Steel, Corrosion-Resistant, Sheet and Strip 18Cr - 8Ni (SAE
30301) Cold Rolled, 3/4 Hard, 175 ksi (1207 MPa) Tensile
Strength
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business