MS33786B
Size code number |
Nominal tube and hose size (ref) inch (mm) |
A dia. +.050 (1.27) -.005 (0.13) |
C dia. inch (mm) |
G dia, ±.005 (0.13) inch (mm) |
|
56 |
3.500 (88.90) |
3.281 (88.34) |
4.281 (108.74) |
+.020 (0.51) -.000 |
4.875 (123.83) |
64 |
4.000 (101.60) |
3.781 (96.04) |
4.781 (121.44) |
5.438 (138.13) |
|
80 |
5.000 (127.00) |
4.781 (121.44) |
5.781 (146.84) |
6.438 (163.53) |
|
96 |
6.000 (152.40) |
5.781 (146.84) |
6.781 (172.24) |
+.030 (0.76) -.000 |
7.438 (188.93) |
112 |
7.000 (177.80) |
6.781 (172.24) |
7.781 (197.64) |
8.500 (215.90) |
|
Size code number |
H dia. min inch (mm) |
Thread J in accordance with MIL-S-7742 (see note 5) |
K ±.020 (0.51) inch (mm) |
L |
M Bolt hole +.010 (0.25) -.000 inch (mm) |
56 |
5.562 (141.27) |
.3125-24UNF-3A |
.812 (20.62) |
.688 (17.48) |
.328 (8.33) |
64 |
6.125 (155.58) |
||||
80 |
7.125 (180.98) |
||||
96 |
8.125 (206.38) |
||||
112 |
9.188 (233.38) |
Size code number |
N (see note 6) inch (mm) |
p Attachment points |
x inch (mm) |
y +.005 (0.13) -.000 inch (mm) |
|
56 |
.469 (11.91) |
8 |
4.214 (107.04) |
+.000 -.010 (0.25) |
.188 (4.78) |
64 |
4.777 (121.34) |
||||
80 |
10 |
5.777 (146.74) |
.208 (5.28) |
||
96 |
12 |
6.777 (172.14) |
+.000 -.020 (0.51) |
||
112 |
14 |
7.840 (199.14) |
.220 (5.59) |
||
Size code number |
Wrench torque (see note 7) inch-pounds (Nm) |
56 |
225 (25.4) |
64 |
|
80 |
|
96 |
|
112 |
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for information only.
3. Unless otherwise noted tolerances are ±.005 (0.76 mm), angles ±.5°.
4. Detail design and construction of swivel fitting mounting pad optional except that gasket sealing surfaces, as noted, shall be finished smooth with a surface roughness not to exceed 150µ-in Ra. Surface finish shall be in accordance with ASME B46.1.
5. Thread J applies to external portion of studs and internal tapped thread for cap screws.
6. For studs and cap screws only.
7. Tabulated torque values indicate limits for proper sealing of fitting to pad.
FIGURE 5. Installation (56 through 112) dimensions and configurations - Continued.
9
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business