MS33786B
Size code number |
Nominal tube and hose size (ref) inch (mm) |
C dia. +.000 -.005 (0.13) inch (mm) |
E inch (mm) |
F rad. inch (mm) |
|
-40 |
2.500 (63.50) |
3.281 (83.34) |
4.000 (101.60) |
±.020 (0.51) |
.375 (9.53) |
-48 |
3.000 (76.20) |
3.781 (96.04) |
4.500 (114.30) |
.625 (15.88) |
|
Size code number |
G dia. ±.005 (0.13) inch (mm) |
H dia. inch (mm) |
Thread J in accordance with MIL-S-7742 (see note 5) |
M bolt hole +.010 (0.25) -.000 inch (mm) |
-40 |
3.812 (96.82) |
4.500 (114.30) |
.3125-24UNF-3A |
.328 (8.33) |
-48 |
4.312 (109.52) |
5.000 (127.00) |
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for information only.
3. Unless otherwise noted tolerances are ±.005 (0.76 mm), angles ±.5°.
4. Detail design and construction of swivel fitting mounting pad optional except that gasket sealing surfaces, as noted, shall be finished smooth with a surface roughness not to exceed 150µ-in Ra. Surface finish shall be in accordance with ASME B46.1.
5. Thread J applies to external portion of studs and internal tapped thread for cap screws.
FIGURE 4. Installation hex mounting -40 and -48, dimensions and configurations.
7
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business