MIL-DTL-85061C
4.5.10.3 Disassembly and inspection. Upon completion of the burst pressure test, the
coupling shall be disassembled and each part and tubing end examined. Any evidence of cracks,
ruptures, or any other structural deformation or failures of any coupling part shall be cause for
rejection of the test coupling.
5. PACKAGING
5.1 Packaging. For acquisition purposes, the packaging requirements shall be as
specified in the contract or order (see 6.2). When packaging of the materiel is to be performed
by DoD or in-house contractor personnel, these personnel need to contact the responsible
packaging activity to ascertain packaging requirements. Packaging requirements are maintained
by the Inventory Control Point's packaging activities within the Military Service or Defense
Agency, or within the military service's system commands. Packaging data retrieval is available
from the managing Military Department's or Defense Agency's automated packaging files, CD-
ROM products, or by contacting the responsible packaging activity.
5.2 Cleaning and drying. Prior to packing, internal and external surfaces of the coupling
and coupling parts shall be cleaned and dried.
5.3 Marking. In addition to any special or other identification marking required by the
contract, each container shall be marked in accordance with MIL-STD-129 and unless otherwise
specified shall include bar code markings. Marking for commercial packages and interior and
exterior packs shall be in accordance with ASTM-D3951. The complete military and
contractor's part number as applicable including the CAGE code shall be marked on all units.
6. NOTES
(This section contains information of a general or explanatory nature that may be helpful
but is not mandatory.)
6.1 Intended use. The flexible couplings covered by this specification are intended for
connecting two SAE-AS5131 style A beaded tube ends used in aircraft fuel and vent systems.
Variable ferrule type couplings are specified in MIL-C-22263, associated specification sheets,
SAE-AS1710 and SAE-AS1720.
6.1.1 Military application. This specification is maintained to support C-130 series
military aircraft which has beaded tubing end and is available for use other military aircraft with
similar design. Beaded tubing ends have no known commercial application.
18
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business