MIL-DTL-85061C
3.9 Interchangeability of parts. All parts having the same design activity, Commercial
and Government Entity (CAGE) code and manufacturer's part number shall be interchangeable.
Each lot (see 6.4.5) shall be manufactured by the same manufacturer, have the same
manufacturer's part number, and shall be made out of the same material and process at the same
time.
3.10 Identification marking of product. The coupling assemblies shall be marked for
identification in accordance with MIL-STD-130. In addition, the coupling assembly shall have
the following markings (see 1.2.1):
M85061-XX-X (basic specification, size dash number, and material code)
Manufacturer's name and part number
3.11 Workmanship. The coupling shall be fabricated and finished with no defects,
cracks, burrs, tool marks, or sharp edges. Where dimensions are critical and affect the
interchangeability of parts, they shall be within the tolerances specified.
3.12 Inspection for delivery. The coupling and its container shall be inspected in
accordance with 4.5.1.2 to make sure the parts are correct and marked properly before delivery.
4. VERIFICATION
4.1 Classification of inspections. The inspection requirements specified herein are
classified as follows:
a.
First article inspection (see 4.2).
b.
Conformance inspection (see 4.3).
4.2 First article inspection. First article inspection shall consist of all examinations and
tests specified in table IV.
4.2.1 First article samples. Unless otherwise specified in the contract or order, as soon
as practicable after the award of the contract or order, the manufacturer shall submit two
couplings of each size and material specified in the contract or order and two complete sets of
detail and assembly drawings. The samples shall be representative of the construction,
workmanship, internal components, and materials used during production. When a manufacturer
is in continuous production of these units from contract to contract, submission of further first
article samples on a new contract may be waived at the discretion of the acquiring activity (see
6.2c). Approval of the first article samples or the waiving of the first article inspection does not
waive the requirements of submitting to the conformance inspection. The first article inspection
samples shall be furnished to the Government as directed by the contracting activity (see 6.2e).
11
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business