MS27395D
REQUIREMENTS:
Intended use. This part is a component of MS27389 for sizes -3/-4C through -8, and MS27387 for sizes -10 through -24. This is a design standard for manufacturing purposes. The item is only procured as an integral part of adapter assemblies.
Dimensions and configuration see figure 1. Material: Material and material codes see table I.
TABLE I. Material to material code.
Material code |
Material |
Requirements |
C |
CRES |
Class 304 or 321 cold drawn or cold rolled, in accordance with SAE-AMS5639 or SAE-AMS5645. |
|
D |
Aluminum |
Bar alloy 6061-T6 or T651 in accordance with SAE-AMS4117. Forgings alloy 6061-T6 in accordance with SAE-AMS-QQ-A- 367, or SAE-AMS4127. Bar alloy 7075-T73, 7075-T7351 in accordance with SAE-AMS-QQ-A-225/9 or alloy 7055-T7351 in accordance with SAE-AMS4124. |
Finish:
Corrosion-resistant steel, passivate in accordance with SAE-AMS2700, method 1, type 6 or 7. Aluminum alloy, anodize in accordance with MIL-A-8625, type II, dye yellow.
Dry film lubricant. Dry film lubricate in accordance with figure 2 and table II.
NOTE: Avoid using graphite dry film lubes with aluminum elbow end because in a wet environment, graphite becomes corrosive to the aluminum.
8
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business