MS27064E
Part or Identifying Number (PIN): The PIN consists of prefix "MS", the specification sheet number, dash number for 45° elbow subassembly size, letter for material, and a blank or number for dry film lubricant. Unassigned PIN's shall not be used.
MS 27064 -10 C 4
Dry film class designator (see table III) Material code letter (see table I)
Size code number (see table II)
Specification sheet number
PIN examples:
MS prefix
MS27064-10 |
indicates a 45° elbow subassembly 10, a combination of aluminum and CRES, and with dry film class designator "blank". |
MS27064-10C |
indicates a 45° elbow subassembly size 10, CRES with dry film class designator "blank". |
MS27064-10C4 |
indicates a 45° elbow subassembly size 10, CRES with dry film class designator 4. |
Identification of product. The PIN and Government Entity (CAGE) Code or manufacturer's trademark shall be permanently marked on the elbow subassembly.
Order of precedence. Unless otherwise noted herein or in the contract, in the event of a conflict between the text of this document and the references cited herein, the text of this document takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained.
Referenced documents shall be of the issue in effect on date of invitations for bid.
Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue, due to the extent of the changes.
Referenced documents. In addition to MIL-DTL-27272, this document references the following:
MIL-A-8625
MIL-PRF-46010
MS20756
MS27077
MS27071
MS27072
MS27056
MS27084
SAE-AS1701
SAE-AS5272
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business