MS27064E
REQUIREMENTS
Elbow subassembly illustration. See figure 1
Intended use. This part is a component of MS27056.
Materials. Material and material codes see table I. See applicable specification sheet and MIL-0TL-27272 for material of other components identified in table II for their material requirements.
TABLE I. Materials and material codes.
Material code |
Material |
Blank |
Combination of aluminum alloy and corrosion-resistant steel (CRES) |
C |
CRES |
Finish: Finishes are performed at component level. Corrosion-resistant steel, do not passivate.
Aluminum alloy. Anodize in accordance with MIL-A-8625, type II, dye blue.
TABLE II. Elbow subassembly composition. 1/ 2/
|
Size and material code |
Wire size and material code |
Union, nipple size and material code |
Elbow, nipple end size and material code |
A 5/ ±.035 (0.89) inch (mm) |
B 5/ ±.035 (0.89) inch (mm) |
MS27072 3/ |
MS27071 3/ 4/ |
MS27084 3/ 4/ |
|||
-8C |
-8C |
-8C |
-8C |
1.266 (32.16) |
.338 (8.59) |
-8 |
-80 |
||||
-10C |
-10C |
-10C |
-10C |
1.324 (33.63) |
.375 (9.53) |
-10 |
-100 |
-100 |
|||
-12C |
-12C |
-12C |
-12C |
1.782 (45.26) |
.468 (11.89) |
-12 |
-120 |
-120 |
|||
-16C |
-16C |
-16C |
-16C |
1.838 (46.69) |
.505 (12.83) |
-16 |
-160 |
-160 |
|||
-20C |
-20C |
-20C |
-20C |
2.052 (52.12) |
.569 (14.45) |
-20 |
-200 |
-200 |
|||
-24C |
-24C |
-24C |
-24C |
2.318 (58.88) |
.624 (15.85) |
-24 |
-240 |
-240 |
1/ 0imensions are in inches.
2/ Metric equivalents are given for general information only.
3/ MS27071, MS27072, and MS27084 shall be dry film lubricated in accordance with table III, dry film is applied in accordance with MS27071, MS27072, or MS27084 as applicable.
4/ Material code "0" aluminum alloy.
5/ See figure 1.
MS27071, MS27072, and MS27084 parts shall be coated with the same type of dry film lubricant as indicated in the PIN, no mixing of dry film lubricants shall be used on an assembly unless it is of the types specified by the "blank" designator.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business