MS24591D
REQUIREMENTS:
Dimensions and configurations: The design, construction, and physical dimensions shall be in accordance with MIL-DTL-5070 and figure 1 in case of conflict between this drawing and
MIL-DTL-5070, this drawing shall govern.
Intended use. This part is a component of MS24587, MS27224, MS27226, MS27228, MS27230, and
MS27232.
Material: Aluminum in accordance with MIL-DTL-5070. Finish: Finish shall be in accordance with MIL-DTL-5070.
Color identification: Color identification shall be in accordance with MIL-DTL-5070.
PIN example:
MS 24591 -16 AA
Material/finish code, see table I Dash number on figure 1
Specification number
MS prefix
TABLE I. Code for material and finish.
Code |
Dash size |
Material/finish |
AA |
-16 through - 32 |
Aluminum - anodic coating |
Marking: The PIN and the manufacturer's Commercial and Government Entity (CAGE) Code or trademark shall be marked on the socket or a removable tag securely attached to the socket.
Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue, due to the extent of the changes.
Referenced documents. In addition to MIL-DTL-5070, this document references the following:
MIL-S-7742
MS24587
MS27224
MS27226
MS27228
MS27230
MS27232
ASME B46.1
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business