MIL-DTL-5513 Swivel Joint, HydraulicThis specification establishes the requirements for hydraulic swivel joints \(see 6.1\).

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21

MIL-DTL-5513D

2. APPLICABLE DOCUMENTS

2.1 General. The documents listed in this section are specified in sections 3, 4, and 5 of this

specification. This section does not include documents cited in other sections of this specification or

recommended for additional information or as examples. While every effort has been made to ensure the

completeness of this list, document users are cautioned that they must meet all specified requirements

documents cited in sections 3, 4, and 5 of this specification, whether or not they are listed.

2.2 Government documents.

2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks

form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these

documents are those cited in the solicitation or contract.

DEPARTMENT OF DEFENSE SPECIFICATIONS

MIL-F-8815

Filter and Filter Elements, Fluid Pressure, Hydraulic Line, 15 Micron Absolute

and 5 Micron Absolute, Type II Systems, General Specification For

MIL-H-8890

Hydraulic Components, Type III (-65� to 450�F), General Specification For

MIL-DTL-25579

Hose Assembly, Polytetrafluoroethylene, High Temperature, Medium Pressure

DEPARTMENT OF DEFENSE STANDARDS

MIL-STD-129

Marking For Shipment and Storage

MIL-STD-810

Environmental Test Methods

MIL-STD-889

Dissimilar Metals

(Copies of these documents are available online at https://assist.daps.dla.mil/quicksearch/ or from the

Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-

5094.)

2.3 Non-Government publications. The following documents form a part of this document to the

extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the

solicitation or contract.

INTERNATIONAL ORGANIZATION FOR STANDARDIZATION (ISO)

ISO 17025

General requirements for the competence of testing and calibration laboratories

(Copies of these documents are available online at www.ansi.org or from the ANSI Customer Service

Department, 25 W. 43rd Street, 4th Floor, New York, NY 10036.)

NATIONAL CONFERENCE OF STANDARDS LABORATORIES (NCSL)

NCSL Z540.3

Requirements for the Calibration of Measuring and Test Equipment

(Copies of these documents are available online at https://www.ncsli.org or from NCSL International

2995 Wilderness Place, Suite 107 Boulder, Colorado 80301-5404.)