MIL-DTL-52525/17C
PIN: The PIN consists of the letter "M" the specification sheet number, a dash, a number for the
connecting unit, and a material finish designator.
52525/17
-8
A
M
Material/finish designator (see table III)
Size dash number for the connecting unit (see table I)
Specification sheet number
M prefix
PIN example: M52525/17-8A, describes a .500 inch (12.70 mm) 4-bolt split-flange, aluminum with an
anodized finish.
To the users of this document, it is recommended that the use of carbon steel material with cadmium
plating be used only when the other materials and finishes specified in this document cannot meet
performance requirements.
Color identification. Color identification shall be in accordance with SAE-AS4841.
Changes from previous issue. Marginal notations are not used in this revision to identify changes
with respect to the previous issue, due to the extent of the changes.
Referenced documents. In addition to MIL-DTL-52525, this document references the following:
MIL-A-8625
ASTM F1136
SAE-AMS2700
MIL-DTL-16232
NASM 35338
SAE-AS4841
MIL-DTL-52471
NASM 90725
SAE-AS28775
MIL-DTL-52525/16
SAE-AMS-C-81562
SAE-J515
MIL-DTL-81706
SAE-AMS-QQ-P-416
SAE-J518
ASTM B633
SAE-AMS2417
ASTM B695
SAE-AMS2488
CONCLUDING MATERIAL
Custodians:
Preparing activity:
Army - AT
DLA - CC
Navy - SH
Air Force - 99
(Project 4730-2007-085)
DLA - CC
Review activities:
Army - CR4
Navy - AS, CG, MC, SA, YD
NOTE: The activities listed above were interested in this document as of the date of this document.
Since organizations and responsibilities can change, you should verify the currency of the information
above using the ASSIST Online database at https://assist.daps.dla.mil.
8