MIL-DTL-52525/17C
TABLE I. Connecting units used with flange type - Continued.
Washer, lock
Screw cap
Clamp-halves
helical, split
hex head
flange to port
Clamp-halves
PIN
Fitting
(4 required)
(4 required)
flange to port
SAE-J518
NASM35338
NASM90725
PIN
PIN 1/ 2/
PIN 1/ 2/
M52525/10-24-32
M52525/10-32-32
M52525/11-32-32
M52525/12-32-32
J518-1 32
NASM90725
M52525/17-32
MS35338-48
M52525/16-32
1161
-113
M52525/43-32-32
M52525/44-32-32
M52525/45-24-24
M52525/45-32-32
1/ Bolts and washers identified in table I are for low carbon steel materials only. If another material listed
in table III is used to manufacture bolts or washers the dimensional requirements shall be in
accordance with NASM90725 and NASM35338.
2/ Never reuse fasteners after they have been subjected to loading or the elements.
The O-ring legacy tables II and III shows O-rings originally called out by MIL-DTL-52525/17 and shows the
superseding PIN for a side by side comparison.
4