MIL-DTL-38726B
SAE-AMS6348
-
Steel, Bars 0.95Cr - 0.20Mo (0.28 to 0.33C) (SAE 4130)
Normalized - UNS G41300
SAE-AMS6349
-
Steel Bars, 0.95Cr - 0.20Mo (0.38 to 0.43C) (SAE 4140),
Normalized
SAE-AMS6370
-
Steel, Bars, Forgings, and Rings 0.95Cr - 0.20Mo (0.28 - 0.33C)
(SAE 4130) - UNS G41300
SAE-AMS6382
-
Steel, Bars, Forgings, and Rings, 0.95Cr - 0.20Mo (0.38 - 0.43C)
(SAE 4140), Annealed)
SAE-AMS-C-81562
-
Coatings, Cadmium, Tin-Cadmium and Zinc (Mechanically
Deposited)
SAE-AMS-QQ-A-225/9 -
Aluminum Alloy 7075, Bar, Rod, Wire, and Special Shapes; Rolled,
Drawn, or Cold Finished
SAE-AMS-QQ-P-416
-
Plating, Cadmium (Electrodeposited)
SAE-ARP908
-
Torque Requirements Installation and Qualification Test, Hose and
Tube Fittings
SAE-AS8879
-
Screw Threads - UNJ Profile, Inch
(Copies of these documents are available from https://www.sae.org/ or from SAE International, 400
Commonwealth Drive, Warrendale, PA 15096-0001.)
2.4 Order of precedence. Unless otherwise noted herein or in the contract, in the event of a conflict
between the text of this document and the references cited herein the text of this document takes
precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a
specific exemption has been obtained.
3. REQUIREMENTS
3.1 Specification sheets. The individual item requirements shall be as specified herein and in
accordance with the applicable specification sheet. In the event of any conflict between the requirements
of this specification and the specification sheet, the latter shall govern.
3.2 Qualification. The adapter assembly furnished under this specification shall be a product that is
authorized by the qualifying activity for listing on the applicable qualified products list (QPL) before
3.3 Recycled, recovered, or environmentally preferable materials. Recycled, recovered, or
environmentally preferable materials should be used to the maximum extent possible provided that the
material meets the operational and maintenance requirements, and promotes economically
advantageous life cycle cost
3.4 Materials. Component parts of the adapter assembly shall be fabricated from the materials listed
in table I, as specified in MS27404.
3.4.1 Heat treatment. Aluminum alloy parts shall be heat treated in accordance with
SAE-AMS2770 to the temper specified in table I.
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business