MIL-DTL-38726B
TABLE VII. Inspection sample.
Accept on zero
Production lot size
sample size
1 to 8
All
9 to 90
8
91 to 150
12
151 to 280
19
281 to 500
21
501 to 1,200
27
1,201 to 3,200
35
3,201 to 10,000
38
10,001 to 35,000
46
4.5.4 Periodic inspection. Periodic inspection shall consist of the tests specified in table VIII, in the
order shown.
4.5.4.1 Acceptance of periodic inspection data. For identical requirements and test procedures,
using an identical fitting, conformance inspection data from MIL-DTL-5593 may be accepted as
conformance inspection data for MIL-DTL-38726 provided that documental approval has been obtained
from the qualifying activity.
4.5.4.2 Periodic inspection (1). Periodic inspection (1) as specified in table VIII shall be performed
on six adapter assemblies, conforming to MS27404 of each size and material used with hose conforming
to MIL-DTL-5593 to construct three hose assemblies, at least once per year regardless of the total
number of adapter assemblies produced. The adapter assemblies selected shall be representative of
those produced during the period with respect to materials and joint configurations. If there has been no
production of a specific size during the past year, periodic inspection (1) is not required for that size.
4.5.4.3 Periodic inspection (2). Periodic inspection (2) as specified in table VIII shall be performed
on two adapter assemblies, conforming to MS27404 of any size and material, at least once per year
regardless of the total number of adapter assemblies produced. The adapter assemblies selected shall
be representative of those produced during the period with respect to the metals used for the threaded
parts if the parts have been produced from more than one type of metal. If there has been no production
during the past year, periodic inspection (2) is not required.
11
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business