MIL-DTL-32480/5
Part or Identifying Number (PIN): The PIN consists of the letter M, the basic specification number,
the specification sheet number, fitting dash size, and a letter for the material finish designator.
M
32480
/5
-10
P
Material and finish code (see table I)
Size (see figure 1)
Specification sheet number
Specification number
M prefix
PIN example: M32480 /5-10P indicates a 45°, male, adapter, .6250 inch (15.875 mm), steel with
zinc phosphate finish.
O-ring is not supplied. Order separately, see MIL-DTL-25988.
Cadmium is not recommended. To the users of this document, it is recommended that the use of
carbon steel material with cadmium plating be used only when other materials and finishes specified
in this document cannot meet performance requirements.
Referenced documents. In addition to MIL-DTL-32480, this document references the following:
MIL-DTL-16232
ASTM F1136/F1136M
SAE AMS2488
MIL-DTL-81706
SAE AMS-C-81562
SAE AMS2700
MIL-DTL-25988
SAE AMS-QQ-P-416
SAE AS4375
ASTM B117
SAE AMS2417
SAE AS8879
ASTM B633
SAE AMS2451/5
SAE J514
ASTM B695
SAE AMS2451/9
SAE J515
SAE AMS2486
SAE J1453-1
SAE J1453-3
CONCLUDING MATERIAL
Custodians:
Preparing activity:
Army - AT
DLA - CC
Navy - AS
Air Force - 99
(Project 4730-2014-028)
DLA - CC
Review activities:
Army - AR
Navy - CG, MC, SA, SH
Air Force - 71
NOTE: The activities listed above were interested in this document as of the date of this document.
Since organizations and responsibilities can change, you should verify the currency of the information
above using the ASSIST Online database at https://assist.dla.mil.
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business