MIL-DTL-22263C
1.2.1 Part or identifying number (PIN). The part or identifying number to be used for
couplings acquired to this specification is identified as follows:
M
22263
-XX
-X
Material code (see table I)
Size in dash number (see table II)
Specification number
M prefix
Example: M22263-10-C = 0.625 tube coupling with CRES material
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this
specification. This section does not include documents cited in other sections of this specification
or recommended for additional information or as examples. While every effort has been made to
ensure the completeness of this list, document users are cautioned that they must meet all
specified requirements of documents cited in sections 3 and 4 of this specification, whether or
not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards,
and handbook form a part of this document to the extent specified herein. Unless otherwise
specified, the issues of these documents are those cited in the solicitation or contract.
DEPARTMENT OF DEFENSE SPECIFICATIONS
MIL-DTL-5624
-
Turbine Fuel, Aviation, Grades JP-4 and JP-5
MIL-PRF-7024
-
Calibrated Fluids, Aircraft Fuel System Components
MIL-A-8625
-
Anodic Coatings for Aluminum and Aluminum Alloys
MIL-DTL-25988
-
Rubber, Fluorosilicone Elastomer, Oil and Fuel Resistant,
Sheets, Strips, Molded Parts, and Extruded Shapes
MIL-R-25988/1
-
Rubber, Fluorosilicone Elastomer, Oil- and Fuel Resistant,
O-Rings, Class 1, Grade 70
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business