A-A-59000A
7.4.1 Repair parts and repair parts boxes. Complete sets of repair screens
for each type and class shall be furnished as follows:
(a)
One set for each of the ten initial strainers required.
(b)
One set for each two additional strainers required.
(c)
Cover O-rings - four for every strainer supplied.
(d)
Other O-rings, and seals - one set for every ten strainers
supplied.
When specified (see 7.1) items (c) and (d) shall be furnished in repair boxes.
7.5 Preinstallation instruction. A set of instructions covering the
preinstallation of the equipment should be furnished. Instructions should
include all information necessary to return the unit to active status, such
as, but not limited to: the addition of lubricants prior to operation,
flushing of lines, removal of greaseproof barrier and the location of detached
components. Instructions should be packaged in a transparent waterproof
plastic bag. Closure shall be by heat sealing. The shipping container in
which the instructions are packed shall be so marked.
7.6 Part number. The part number is a definitive number which corresponds to
the type, class, style, size, and screen perforation of strainers covered by
this commercial item description. The commercial item description number, the
type and class code letter, the style and size code numbers and screen
perforation code letter are combined to form a definitive part number. Part
numbers for the strainers are assigned as follows:
X
XX
X
A-A-59000A
Commercial item
description number
Type and class
code letter
Style and size
code number
Screen perforation
code letter
7.6.1 Type and class. The type and class of strainer (see 1.2) are
identified by a single letter (see table V).
TABLE V.
Code letter to type and class.
Type I
Type II
Class 150
A
B
Class 250
C
D
9
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business