WW-P-460E
6.2 Acquisition requirements. Acquisition documents should specify the following:
a. Title, number, and date of this specification. b. PIN required (see 1.2 and 3.1).
c. When a first article is required for inspection and approval (see 3.2 and 4.2.1). d. Level of preservation and packaging, and level of packing required (see 5.1).
6.3 Data requirements. When this specification is used in an acquisition and data are required to be delivered, the data requirements will be developed as specified by an approved Data Item Description (DID) and delivered in accordance with the approved Contract Data Requirements List (DD Form 1423) incorporated into the contract.
When the provisions of DoD Federal Acquisition Regulations (FAR) Supplement, Part 27, Sub-Part 227.405-70 are
invoked and the DD Form 1423 is not used, the data should be delivered by the contractor in accordance with the contract requirements.
6.4 Part Identification Number (PIN). The PIN to be used for fittings applied to this specification is found in the applicable MS sheet.
6.4.1 Guidance on use of alternative parts with less hazardous or nonhazardous materials. This specification provides for a number of alternative plating materials via the PIN. Users should select the PIN with the least hazardous material that meets the form, fit and function requirements of their application.
6.5 Subject term (key word) listing.
Bushings Caps Couplings Crosses Elbows Plugs Reducers
Return Bends
Tees
Y-Branches
6.6 Environmentally preferable material. Environmentally preferable materials should be used to the maximum extent possible to meet the requirements of this specification. As of the dating of this document, the U.S. Environmental Protection Agency (EPA) is focusing efforts on reducing 31 priority chemicals. The list of chemicals is available on their website at https://www.epa.gov/epawaste/hazard/wastemin/priority.htm. Included in the EPA list of
31 priority chemicals are cadmium, lead, and mercury. Use of the materials on the list should be minimized or eliminated unless needed to meet the requirements specified herein (see Section 3).
6.7 Guidance on use of alternative parts with less hazardous or non-hazardous materials. This specification provides for a number of alternative plating materials via the PIN. Users should select the PIN with the least hazardous material that meets the form, fit, and function requirements of their application.
6.8 Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes.
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business