MS9769B
REQUIREMENTS:
Reducer, tube shall be as specified on figure 1.
Fluorescent penetrate examination shall be in accordance with ASTM E1417.
Fluorescent penetrate shall be in accordance with SAE-AMS2644. Material: Corrosion resistant steel in accordance with SAE-AMS5646. Finish: Passivate in accordance with SAE-AMS2700, type 6.
PIN: The PIN consists of the letter "MS" the specification sheet number, and a dash number for tube and port size. Unassigned PIN's shall not be used.
MS 9769 -021
Size dash number (see figure 1) Specification sheet number
MS prefix
Marking: Part shall be permanently marked with the MS PIN, and include the manufacturers CAGE, name, or trademark.
Application note: Fluid flow reduction is from dimension "Dia. L" to "Dia. A".
Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue, due to the extent of the changes.
Referenced documents. This document references the following: ASME B46.1
ASTM E1417
SAE-AMS2644
SAE-AMS2700
SAE-AMS5646
SAE-AS478
SAE-AS8879
9
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business