MS9769B
PIN |
w inches (mm) |
x inches (mm) |
y inches (mm) |
Approx weight lb/100 (kg/100) |
MS9769-021 |
.565 (14.35) |
.585 (14.86) |
.625 (15.88) |
5.05 (2.3) |
MS9769-022 |
.565 (14.35) |
.670 (17.02) |
.688 (17.48) |
6.31 (2.9) |
MS9769-023 |
.565 (14.35) |
.665 (16.89) |
.812 (20.62) |
7.70 (3.5) |
MS9769-024 |
.565 (14.35) |
.740 (18.80) |
1.000 (25.40) |
11.14 (5.1) |
MS9769-031 |
.625 (15.88) |
.690 (17.53) |
.688 (17.48) |
6.94 (3.1) |
MS9769-032 |
.625 (15.88) |
.670 (17.02) |
.750 (19.05) |
7.53 (3.4) |
MS9769-033 |
.625 (15.88) |
.685 (17.40) |
.812 (20.62) |
8.40 (3.8) |
MS9769-034 |
.625 (15.88) |
.765 (19.43) |
1.000 (25.40) |
11.87 (5.4) |
MS9769-035 |
.625 (15.88) |
.895 (22.73) |
1.125 (28.58) |
16.91 (7.7) |
MS9769-036 |
.625 (15.88) |
.965 (24.51) |
1.312 (33.32) |
20.42 (9.3) |
MS9769-037 |
.625 (15.88) |
.985 (25.02) |
1.625 (41.28) |
29.52 (13.4) |
MS9769-041 |
.690 (17.53) |
.690 (17.53) |
.750 (19.05) |
8.29 (3.8) |
MS9769-042 |
.690 (17.53) |
.710 (18.03) |
.812 (20.62) |
9.16 (4.2) |
MS9769-043 |
.690 (17.53) |
.705 (17.91) |
.875 (22.23) |
9.78 (4.4) |
MS9769-044 |
.690 (17.53) |
.770 (19.56) |
1.000 (25.40) |
12.57 (5.7) |
MS9769-045 |
.690 (17.53) |
.910 (23.11) |
1.125 (28.58) |
17.64 (8.0) |
MS9769-046 |
.690 (17.53) |
.985 (25.02) |
1.312 (33.32) |
21.18 (9.6) |
MS9769-051 |
.750 (19.05) |
.725 (18.42) |
.812 (20.62) |
9.49 (4.3) |
MS9769-052 |
.750 (19.05) |
.700 (17.78) |
.875 (22.23) |
10.09 (4.6) |
MS9769-061 |
.815 (20.70) |
.725 (18.42) |
.875 (22.23) |
10.26 (4.7) |
MS9769-062 |
.815 (20.70) |
.825 (20.96) |
1.000 (25.40) |
12.97 (5.9) |
MS9769-063 |
.815 (20.70) |
.808 (20.52) |
1.062 (26.97) |
13.80 (6.3) |
MS9769-064 |
.815 (20.70) |
.955 (24.26) |
1.125 (28.58) |
17.98 (8.2) |
MS9769-065 |
.815 (20.70) |
1.028 (26.11) |
1.312 (33.32) |
21.43 (9.7) |
MS9769-071 |
.875 (22.23) |
.845 (21.46) |
1.000 (25.40) |
13.12 (6.0) |
MS9769-081 |
1.000 (25.40) |
.818 (20.78) |
1.062 (26.97) |
15.91 (7.2) |
MS9769-082 |
1.000 (25.40) |
.965 (24.51) |
1.125 (28.58) |
20.09 (9.1) |
MS9769-083 |
1.000 (25.40) |
1.060 (26.92) |
1.312 (33.32) |
23.84 (10.8) |
MS9769-084 |
1.000 (25.40) |
1.035 (26.29) |
1.312 (33.32) |
23.57 (10.7) |
MS9769-085 |
1.000 (25.40) |
1.060 (26.92) |
1.625 (41.28) |
32.31 (14.7) |
MS9769-121 |
1.375 (34.93) |
1.120 (28.45) |
1.625 (41.28) |
35.93 (16.3) |
MS9769-122 |
1.375 (34.93) |
1.085 (27.56) |
1.875 (47.63) |
43.74 (19.8) |
MS9769-161 |
1.625 (41.28) |
1.163 (29.54) |
1.875 (47.63) |
42.27 (19.2) |
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for information only.
3. Unless otherwise specified tolerances for linear dimensions are ±.010 inch (0.25 mm), angular dimensions ±5°.
4. Machined surfaces shall be finished to 125µ in Ra, unless otherwise specified on the figures.
Surface finish shall be in accordance with ASME B46.1.
5. Break sharp edges .003 to .015 inch (0.08 to 0.38 mm), unless otherwise specified.
6. Sealing surface shall be free of flaws, nicks, chatter marks, or low spots. Unbroken line of contact to show all around at other than extremities of surface when rotated in contact with 74°0' ±0°1' included angle gage lightly coated by rubbing with carbon paper.
FIGURE 1. Reducer, tube dimensions and configurations - Continued.
8
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business