MS9483C
REQUIREMENTS:
Dimensions and configurations: See figure 1.
Material: Steel, corrosion and heat-resistant in accordance with SAE-AMS5646. Max operating temperature: Oxidation resistance up to 1500°F (816°C).
Max operating pressure: 1500 psi (10 MPa).
Finishing: Optional or abrasive finishing by silicon carbide only.
All parts shall be fluorescent penetrant inspected in accordance with ASTM E1417. Part or Identifying Number (PIN):
MS9483 -08
Ferrule size (see figure 1)
Specification sheet number
PIN Example:
MS9483-08 identifies a ferrule, brazing straight, tube .500 inch (tube), CRES. Mark PIN and manufacturer's identification on package.
Do not use unassigned PINs.
Intended usage: Jet engine, miscellaneous parts, oil, fuel, and de-icing kits.
Not to be used on hydraulic, oxygen or applications requiring pressures of 3000 psi (21 MPa). Changes from previous issue. Marginal notations are not used in this revision to identify changes
with respect to the previous issue due to the extent of the changes.
Referenced documents. In addition to SAE-AS4841, this document references the following: ASME 846.1
ASTM E1417
SAE-AMS5646
5
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business