MS9483C
Dash number |
L reference inches (mm) |
M minimum inches (mm) |
Approx weight lb/100 (kg/100) |
-02 |
.481 (12.22) |
.023 (.58) |
.356 (0.16) |
-03 |
.493 (12.52) |
.023 (.58) |
.488 (0.22) |
-04 |
.511 (12.98) |
.023 (.58) |
.615 (0.28) |
-05 |
.511 (12.98) |
.027 (.69) |
.783 (0.36) |
-06 |
.504 (12.80) |
.028 (.71) |
.894 (0.41) |
-07 |
.538 (13.67) |
.028 (.71) |
1.090 (0.49) |
-08 |
.597 (15.16) |
.031 (.79) |
1.910 (0.87) |
-09 |
.596 (15.14) |
.032 (.81) |
2.140 (0.97) |
-10 |
.631 (16.03) |
.033 (.84) |
2.340 (1.06) |
-11 |
.695 (17.65) |
.037 (.94) |
3.350 (1.52) |
-12 |
.696 (17.68) |
.038 (.97) |
3.670 (1.66) |
-14 |
.705 (17.91) |
.039 (.99) |
4.430 (2.01) |
-16 |
.712 (18.08) |
.041 (1.04) |
5.220 (2.37) |
-18 |
.740 (18.80) |
.042 (1.07) |
7.410 (3.36) |
-20 |
.747 (18.97) |
.045 (1.14) |
6.670 (3.03) |
-24 |
.735 (18.67) |
.057 (1.45) |
11.020 (5.00) |
-28 |
.815 (20.70) |
.069 (1.75) |
18.360 (8.33) |
-32 |
.815 (20.70) |
.082 (2.08) |
21.840 (9.91) |
-40 |
.815 (20.70) |
.082 (2.08) |
29.900 (13.56) |
-48 |
.815 (20.70) |
.089 (2.26) |
32.920 (14.93 |
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for information only.
3. Unless otherwise specified tolerances for linear dimensions are ±.010 inch (0.25 mm) and angular dimensions are ±5°, all diameters concentric within .010 inch (0.25 mm) FIM.
4. Unless otherwise specified machined surfaces to be 125µ inches (3.18µm) in accordance with
ASME 846.1
5. Unless otherwise specified break sharp edges .003 - .015 inches (0.08 - 0.38 mm).
6. Surface J shall be free of nicks, chatter marks, or low spots. Unbroken line of contact to show all around at other than extremities of surface J when rotated in contact with 74°0' ±0°1' included angle gage lightly coated by rubbing with carbon paper.
FIGURE 1. Ferrule, brazing, tube fitting straight - Continued.
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business