MS9313B
Dash number |
E Diameter inches (mm) |
F Diameter inches (mm) |
G inches (mm) |
Approximate weight lb/100 (kg/100) |
-02 |
.090 (2.29) |
.124 (3.15) |
.041 (1.04) |
.37 (0.17) |
-03 |
.150 (3.81) |
.185 (4.70) |
.040 (1.02) |
.63 (0.29) |
-04 |
.200 (5.08) |
.242 (6.15) |
.036 (.91) |
1.00 (0.45) |
-05 |
.260 (6.60) |
.302 (7.67) |
.035 (.89) |
1.44 (0.65) |
-06 |
.320 (8.13) |
.358 (9.09) |
.031 (.79) |
1.67 (0.76) |
-07 |
.385 (9.78) |
.430 (10.92) |
.036 (.91) |
2.18 (0.99) |
-08 |
.438 (11.13) |
.504 (12.80) |
.044 (1.12) |
3.27 (1.48) |
-09 |
.500 (12.70) |
.555 (14.10) |
.036 (.91) |
3.82 (1.73) |
-10 |
.562 (14.27) |
.621 (15.77) |
.039 (.99) |
4.36 (1.98) |
-11 |
.625 (15.88) |
.698 (17.73) |
.048 (1.22) |
5.67 (2.57) |
-12 |
.686 (17.42) |
.769 (19.53) |
.054 (1.37) |
6.39 (2.90) |
-14 |
.812 (20.62) |
.894 (22.71) |
.054 (1.37) |
8.09 (3.67) |
-16 |
.938 (23.83) |
1.021 (25.93) |
.055 (1.40) |
9.92 (4.50) |
-18 |
1.062 (26.97) |
1.174 (29.82) |
.074 (1.88) |
13.91 (6.31) |
-20 |
1.188 (30.18) |
1.299 (32.99) |
.074 (1.88) |
17.00 (7.71) |
-24 |
1.438 (36.53) |
1.532 (38.91) |
.062 (1.57) |
23.61 (10.71) |
-28 |
1.688 (42.88) |
1.839 (46.71) |
.100 (2.54) |
34.90 (15.83) |
-32 |
1.938 (49.23) |
2.099 (53.31) |
.107 (2.72) |
42.65 (19.35) |
-40 |
2.438 (61.93) |
2.594 (65.89) |
.117 (2.97) |
57.75 (26.19) |
-48 |
2.938 (74.63) |
3.099 (78.71) |
.107 (2.72) |
75.45 (34.22) |
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for information only.
3. Caps shall be free of all burrs and slivers.
4. Unless otherwise specified tolerance is ±.010 inch (0.25 mm) angular dimensions ±5°.
5. This surface shall be free of nicks, chatter marks, or low spots. Unbroken line of contact to show all around at other than extremities of this surface when rotated in content with 74° 0'± 0° 1' included angle gage lightly coated by rubbing with carbon paper.
6. For design features purposes, this standard takes precedence over documents referenced herein.
FIGURE 1. Cap, tube - Continued. REQUIREMENTS:
Dimensions and configurations: See figure 1.
Material: Steel, corrosion and heat-resistant in accordance with SAE-AMS5646. Parts shall be fluorescent penetrate inspected in accordance with ASTM E1417.
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business