MS9196B
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for information only.
3. Unless otherwise specified tolerances for linear dimensions are ±.015 inch (0.38 mm) and angular dimensions are ±5°, all diameters shall be concentric within .010 inch (0.25 mm) FIM.
4. Unless otherwise specified machined surfaces to be 125µ inches (3.18µm) in accordance with
ASME B46.1.
5. Diameter F shall be free of thread marks.
6. Diameter F shall be concentric with PD of thread within .0025 inch (1.134 mm) FIM.
7. Lettering height:
For size -02 through -04 dimension: .020 - .040 inch (0.51 - 1.02 mm). For size -05 through -16 dimension: .040 - .060 inch (1.02 - 1.52 mm). For size -18 and larger dimension: .090 - .150 inch (2.29 - 3.81 mm).
8. Parting line mismatch .015 inch (0.38 mm) max.
9. Unless otherwise specified break sharp edges .003 - .015 inches (0.08 - 0.38 mm).
10. Dimensions are to sharp corners unless otherwise specified.
11. All threads shall be in accordance with FED-STD-H28/2.
FIGURE 1. Tee, tube, boss - Continued.
REQUIREMENTS:
Dimensions and configurations: See figure 1.
Material: Steel, corrosion and heat-resistant in accordance with SAE-AMS5646. Max operating temperature: Oxidation resistance up to 1500°F (816°C).
Max operating pressure: 1500 psi (10 MPa).
Finish: Passivate in accordance with SAE-AMS2700, method 1.
All parts shall be fluorescent penetrant inspected in accordance with ASTM E1417. PIN:
MS9196 -08
Elbow size (see figure 1)
Specification sheet number
PIN Example:
MS9196-08 identifies a tee .500 inch (tube), CRES. Do not use unassigned PINs.
The approximate weight for each fitting is shown in table I
8
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business