MS9194C
REQUIREMENTS:
Dimensions and configurations: See figure 1.
Material: Steel, corrosion and heat-resistant in accordance with SAE-AMS5646. Max operating temperature: Oxidation resistance up to 1500°F (816°C).
Max operating pressure: 1500 psi (10MPa).
Finish: Passivate in accordance with SAE-AMS2700, method 1.
All parts shall be fluorescent penetrant inspected in accordance with ASTM E1417. PIN:
MS9194 -08
Elbow size (see figure 1)
Specification sheet number
PIN Example:
MS9194-08 identifies a 90° elbow .500 inch (tube), CRES. Do not use unassigned PIN's.
Intended usage: Jet engine, miscellaneous parts, oil, fuel, and de-icing kits.
Not to be used on hydraulic, oxygen or applications requiring pressures of 3000 psi (21 MPa). Changes from previous issue. Marginal notations are not used in this revision to identify changes
with respect to the previous issue due to the extent of the changes.
Referenced documents. In addition to SAE-AS4841, this document references the following: FED-STD-H28/2
ASTM E1417
ASME 846.1
SAE-AS478
SAE-AMS2700
SAE-AMS5646
10
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business