MS9194C
Dash number |
z inches (mm) ±.010 (0.25) |
Approx weight lbs/ea (grams/ea) |
-02 |
1.018 (25.86) |
.025 (11) |
-03 |
1.033 (26.24) |
.036 (16) |
-04 |
1.146 (29.11) |
.050 (23) |
-05 |
1.171 (29.74) |
.065 (29) |
-06 |
1.301 (33.05) |
.083 (38) |
-07 |
1.336 (33.93) |
.097 (44) |
-08 |
1.523 (38.68) |
.186 (84) |
-09 |
1.553 (39.45) |
.215 (98) |
-10 |
1.743 (44.27) |
.280 (127) |
-11 |
1.918 (48.72) |
.408 (185) |
-12 |
1.948 (49.48) |
.445 (202) |
-14 |
2.070 (52.58) |
.538 (244) |
-16 |
2.135 (54.23) |
.644 (292) |
-18 |
2.225 (56.52) |
.954 (433) |
-20 |
2.290 (58.17) |
1.087 (493) |
-24 |
2.145 (54.48) |
1.436 (651) |
-28 |
2.750 (69.85) |
2.612 (1185) |
-32 |
3.100 (78.74) |
3.382 (1534) |
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for information only.
3. Unless otherwise specified tolerances for linear dimensions are ±.015 inch (0.38 mm) and angular dimensions are ±5°, all dimensions concentric within .010 inch (0.25 mm) FIM.
4. Unless otherwise specified machined surfaces to be 125µ inches (3.18µm) in accordance with
ASME 846.1.
5. Diameter F shall be free of thread marks.
6. Diameter F shall be concentric with PD of thread within .0025 inch (1.134 mm) FIM.
7. Lettering height:
For -02 through -04 size: .020 - .040 inch (0.51 - 1.02 mm). For size -05 through -16: .040 - .060 inch (1.02 - 1.52 mm). For size -18 and larger: .090 - .150 inch (2.29 - 3.81 mm).
8. All diameters shall be concentric within .010 inch (0.25 mm) FIM unless otherwise specified.
9. Parting line mismatch .015 inch (0.38 mm) max.
10. E minimum wall thickness between forged surface and hole A.
11. Unless otherwise specified break sharp edges .003 - .015 inches (0.08 - 0.38 mm).
12. Dimensions are to sharp corners unless otherwise specified.
13. Threads shall be in accordance with FED-STD-H28/2.
FIGURE 1. Elbow, tube, boss, 90° - Continued.
9
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business