MS39212J
TA8LE I. Material and finish designators.
Designator |
Material |
Finish |
8lank |
Steel |
Cadmium plating in accordance with SAE-AMS-C-81562, type II, class 3 or SAE-AMS-QQ-P-416, type II, class 2. |
G |
Steel |
Zinc plating with chromate conversion in accordance with ASTM 8695, type II, class 5. |
H |
Steel |
Zinc phosphate in accordance with MIL-DTL-16232, type Z, class 1 and shall be hexavalent chromium free. |
J |
Steel |
Zinc plating with chromate conversion in accordance with ASTM 8633; type VI, Fe/Zn 25 |
N |
Steel |
NAVAIR trivalent chromium pretreatment (TCP) in accordance with MIL-DTL-81706, type II, class 1a. |
P |
Steel |
Zinc plating with colorless passivate in accordance with ASTM 8633, type VI, Fe/Zn 5. |
S |
Corrosion resistant steel 1/ |
No additional finish. Passivation in accordance with SAE-AMS2700, type 6 or 7. 1/ |
V |
Steel |
Zinc nickel in accordance with SAE-AMS2417, type 1. |
1/ Stainless steel of such hardness as to be capable of biting, fully annealed type 304 stainless steel
tubing.
Part or Identifying Number (PIN) example:
MS39212 - 1 R
MS number
Dash number (see figure 1)
Material and finish designator, see table I.
Guidance on use of alternative parts with less hazardous or non-hazardous materials. This specification provides an alternate material, corrosion resistant steel, and Zinc finish via the PIN. Users should select the PIN with the least hazardous material that meets the form, fit, and function requirements of their
For old designs that use compression sleeves, shall be done in accordance with MS39212. Table II shows supersession data to compression sleeves in accordance with SAE-J514. These replacements are for new design. Users are cautioned to evaluate replacements for their particular application.
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business