MS39202G
Chemical finish:
Code |
Finish |
C |
Carbon steel: Cadmium in accordance with SAE-AMS-QQ-P-416, type II, class 3, 200µ inches to 300µ inches (5.08 µm to 7.62 µm) thick. |
F |
Alloy: Cadmium in accordance with SAE-AMS-QQ-P-416, type II, class 3, 200µ inches to 300µ inches (5.08 µm to 7.62 µm) thick. |
S |
Corrosion resistant steel: Passivate in accordance with SAE AMS2700, type 6 or 7. |
Z |
Steel, alternative chem finish: ASTM 8633 type VI, FeZn 25. |
Part or Identifying Number (PIN) example: (PIN covers the complete item with nuts and sleeves.)
MS 27612 -8 C Z
If finish code same as Material code, then use only one code.
Material code
Dash size
Specification number
MS prefix
Guidance on use of alternative parts with less hazardous or non-hazardous materials. This specification provides an alternate material, corrosion resistant steel, and Zinc finish via the PIN. Users should select the PIN with the least hazardous material that meets the form, fit, and function requirements of their application.
Changes from previous issue. The margins of this specification are marked with vertical lines to indicate where changes from the previous issue were made. This was done as a convenience only and the Government assumes no liability whatsoever for any inaccuracies in these notations. 8idders and contractors are cautioned to evaluate the requirements of this document based on the entire content irrespective of the marginal notations and relationship to the last previous issue.
Referenced documents. This document reference the following: FED-STD-H28 SAE AMS5665
ASTM A564/A564M SAE AMS5862
ASTM 8633 SAE AMS2700
SAE AIR4127 SAE-AMS-QQ-P-416
SAE AMS5659 MS39212
MS39210
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business