MS39202G
TABLE I. Elbows, pipe to tube-safety sleeve compression type, 90 degree, male pipe end - Continued. 1/ 2/
K |
L |
M |
3/4 |
21/32 |
31/32 |
3/4 |
21/32 |
1 |
25/32 |
3/4 |
1-5/32 |
25/32 |
13/16 |
1-3/16 |
1-1/16 |
7/8 |
1-9/32 |
1-1/16 |
15/16 |
1-3/8 |
1-3/16 |
1-1/8 |
1-9/16 |
1-3/16 |
1-1/8 |
1-21/32 |
1-3/16 |
1-5/16 |
1-27/32 |
1-7/16 |
1-1/8 |
1-9/16 |
1-1/4 |
1-3/16 |
1-23/32 |
1-7/16 |
1-5/16 |
1-27/32 |
1-9/16 |
1-1/2 |
2-3/32 |
1-9/16 |
1-1/2 |
2-3/32 |
1-3/4 |
1-3/4 |
2-11/32 |
1-3/4 |
1-3/4 |
2-11/32 |
1-15/16 |
1-3/4 |
2-11/32 |
1-15/16 |
1-3/4 |
2-11/32 |
1-5/16 |
2-1/4 |
2-7/8 |
2-5/16 |
2-1/4 |
2-7/8 |
2-9/16 |
2-3/8 |
3-1/16 |
1/ Dimensions are in inches.
2/ This illustration is for identification and is not intended to restrict designs or shapes not dimensioned.
REQUIREMENTS:
Dimensions and configuration: See figure 1.
Tolerances: Unless otherwise specified, decimals ±.005, fractions ±1/64, degrees ±2°. Threads: The threads shall be in accordance with FED-STD-H28.
Elbows. See table I.
Material:
Code |
Material |
C |
Steel bar, type AISI-C-1112, C-1113, C-1117, C-1118 or C-1137 in accordance with SAE AIR4127. |
F |
Alloy steel, in accordance with SAE AIR4127. |
S |
Corrosion resistant steel in accordance with SAE AMS5659, SAE AMS5862, or, alloy 15-5 PH in accordance with ASTM A564/A564M type XM-12 or UNS S15500, or SAE AMS5665. |
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business