MS39135G
TABLE II. Alternate design nut materials.
MS dash number |
Material |
-A-1-B |
Brass |
-A-1-S |
Steel |
FIGURE 2. Alternate design, hose coupling, nut - Continued.
REQUIREMENTS:
Nuts shall be as specified on figures 1 and 2 and tables I and II.
The nuts specified herein are a component of the adapter, straight pipe to hose, automotive air brake hose
MS39133.
Materials shall conform to formed rod, tempered, half-hard brass as specified in ASTM-B16/B16M and steel as specified in ASTM-A108.
Finishes for brass shall be uncoated and steel shall be zinc coated, thickness not less than 25µm, type II, as specified in ASTM-B633.
Tolerances for the nut, unless otherwise specified, are as follows:
.XXX = ±.005
.XX = ±.02
Angles ±2°
Threads shall be in accordance with FED-STD-H28/2 and ASME-B1.1. Example of a PIN: MS39135-1-B
MS39135 -1 -B
Specification sheet number
Size dash number for pipe end (see table I) Material (see table I)
Example of a PIN, alternate design: MS39135-A-1-B.
MS39135 -A -1 -B
Specification sheet number
Dash letter for alternate design
Size dash number for pipe end (see table II) Material (see table II)
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business