MS33651C
Supersession data: This air valve replaces AN6287-1 on shock struts, air bottles and accumulators and is suitable for all operating pressures up to 5000 psi (17 MPa).
FIGURE 5. M6164-2 high pressure air valve assembly. REQUIREMENTS
This is a design standard and not to be used as a PIN.
Use 0-ring SAE-AS568-015 to seal valve at the boss, using holes provided in 3/4 hex of body. Use valve as a complete assembly. Do not interchange parts.
The valve assembly shall not contact any internal parts of the unit in which it is used. An additional area of .078 inch (1.98 mm) minimum clearance shall be provided for opening valve.
Steel boot shall be used with steel bolt and aluminum alloy body shall be used with aluminum alloy bolt. Provide space around valve M6164-2 to permit use of open end wrench on the hexes and to protect
connection of MIL-DTL-8348 gage assemblies.
5
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business