MS28760E
|
Size dash no. |
Hose ID ref Inch (mm) |
Tubing OD (inch) (mm) |
Nut PIN |
A Max inch (mm) |
B Max inch (mm) |
C inch (mm) |
|
4 |
.219 (5.56) |
.250 (6.35) |
AN818-4 |
.875 (22.23) |
2.100 (53.34) |
.295 (7.49) |
±.010 (0.25) |
5 |
.281 (7.14) |
.313 (7.95) |
AN818-5 |
.937 (23.80) |
2.240 (56.90) |
.355 (9.02) |
|
6 |
.344 (8.74) |
.375 (9.53) |
AN818-6 |
1.160 (29.46) |
2.470 (62.74) |
.435 (11.05) |
|
8 |
.438 (11.13) |
.500 (12.70) |
AN818-8 |
1.375 (34.93) |
2.730 (69.34) |
.573 (14.55) |
|
10 |
.563 (14.30) |
.625 (15.88) |
AN818-10 |
1.550 (39.37) |
3.020 (76.71) |
.680 (17.27) |
|
12 |
.688 (17.48) |
.750 (19.05) |
AN818-12 |
1.740 (44.20) |
3.230 (82.04) |
.850 (21.59) |
|
16 |
.875 (22.23) |
1.000 (25.40) |
AN818-16 |
2.000 (50.80) |
3.600 (91.44) |
1.103 (28.02) ±.015 (0.38) |
|
Size dash no. |
D inch (mm) |
E Min inch (mm) |
F Min inch (mm) |
G min (see note 5) inch (mm) |
x inch (mm) |
|
4 |
.375 (9.53) |
±.015 (0.38) |
.188 (4.78) |
.146 (3.71) |
.563 (14.30) |
.005 (0.13) |
5 |
.177 (4.50) |
.625 (15.88) |
||||
6 |
.250 (6.35) |
.271 (6.88) |
.688 (17.48) |
|||
8 |
.438 (11.13) |
.365 (9.27) |
.875 (22.23) |
.010 (0.25) |
||
10 |
.515 (13.08) |
±.031 (0.79) |
.312 (7.92) |
.455 (11.56) |
1.000 (25.40) |
|
12 |
.502 (12.75) |
.375 (9.53) |
.508 (12.90) |
1.250 (31.75) |
||
16 |
.620 (15.75) |
.778 (19.76) |
1.500 (38.10) |
|||
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for information only.
3. Unless otherwise specified, tolerances are ±.005 inch (0.13 mm).
4. The fitting identification shall be marked in accordance with MIL-DTL-8789.
5. Hex or flats shall fit standard wrench openings.
6. Threads shall be in accordance with SAE-AS8879
FIGURE 1. Fitting end, straight, flared tube dimensions and configuration - Continued. REQUIREMENTS:
These fittings are for use with MIL-DTL-8788 hose. See figure 1 for fitting end sizes and dimensions.
Material: Nipples and nuts shall be of steel and the socket shall be of aluminum in accordance with
MIL-DTL-8789. Finish:
Aluminum alloy: Anodic treatment, in accordance with MIL-A-8625, type II.
Steel: Cadmium plate, in accordance with SAE AMS-QQ-P-416, type II, class 3, color-black.
A non-standard swivel nut may be used provided the hex and thread dimensions are in accordance with AN818 and the nut shall not be removable from the assembly.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business