MS27639B
|
PIN |
A +.000 -.005 (-0.13) inches (mm) |
MS27639-4C |
.315 (8.00) |
MS27639-6C |
.410 (10.41) |
MS27639-8C |
.505 (12.83) |
MS27639-10C |
.640 (16.26) |
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for information only.
3. All tolerances shall be ±.005 inch (0.13 mm), unless otherwise specified.
4. Surface roughness, in accordance with ASME B46.1, shall not exceed 125 µin Ra, unless otherwise specified.
5. For hex, use commercial stock size tolerance as specified in SAE-AMS2241.
6. Dimensioning and tolerancing are in accordance with ASME Y14.5M.
7. Radius or break all corners to .005 +.005/-.000 inch (0.13 +0.13/-0.00 mm), unless otherwise specified.
8. All burrs and slivers shall be removed.
FIGURE 1. Disassembly tool - Continued. REQUIREMENTS:
Dimensions and configurations: The design, construction, and physical dimensions shall be in accordance with MIL-DTL-83296 and on figure 1, in case of conflict between this specification sheet and MIL-DTL-83296, this specification sheet shall govern.
This part for use with hose assemblies in accordance with MIL-DTL-32330.
Material: Material shall be tool steel alloy UNS T41902, type 2 in accordance with ASTM A681. Hardness: Hardness shall be Rockwell C 58 to 60.
Finish: Finish shall be black oxide in accordance with SAE-AMS2485.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business