MS27623C
REQUIREMENTS:
Dimensions and configurations: The design, construction, and physical dimensions shall be in accordance with MIL-DTL-83296 and figure 1, in case of conflict between this specification sheet and MIL-DTL-83296, this specification sheet shall govern.
This part is a component of MS27616, MS27617, MS27618, MS27620, MS27621, MS27633, and
MS27634. The item is only procured as an integral part of an adapter assembly.
Material: Material shall be corrosion resistant steel (CRES) alloy 17-4PH in accordance with
SAE-AMS-5643.
Hardness: Hardness shall be Rockwell C 35 to 39 or Rockwell superficial hardness 30N-55.5 to
N-58.5.
Finish: Finish shall be passivated as specified in MIL-DTL-83296. PIN example:
MS27623 -4 C
Material (C for CRES)
Dash size (see figure 1)
Specification sheet number
MS prefix
PIN example: MS27623-4C indicates a sleeve 1/4 inch, CRES.
Changes from previous issue. Marginal notations are not used in this revision to identify changes due to the extent of the changes.
Referenced documents. In addition to MIL-DTL-83296, this document references the following:
MIL-DTL-83298
MS27616
MS27617
MS27618
MS27620
MS27621
MS27633
MS27634
ASME Y14.5M ASME 846.1
SAE-AMS-5643
SAE-AS5272
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business