MS27623C
PIN |
H +.000 -.005 (-0.13) inch (mm) |
J ±.003 (0.08) inch (mm) |
K +.000 -.005 (-0.13) inch (mm) |
L ±.005 (0.13) inch (mm) |
M ±.005 (0.13) inch (mm) |
N ±.005 (0.13) inch (mm) |
P ±.005 (0.13) inch (mm) |
R ±.005 (0.13) inch (mm) |
MS27623-4C |
- |
.440 (11.18) |
- |
- |
.085 (2.16) |
.185 (4.70) |
.275 (6.99) |
- |
MS27623-6C |
- |
.584 (14.83) |
- |
- |
.100 (2.54) |
.225 (5.72) |
.300 (7.62) |
- |
MS27623-8C |
- |
.663 (16.84) |
- |
- |
.260 (6.60) |
.360 (9.14) |
.460 (11.68) |
- |
MS27623-10C |
.760 (19.30) |
.740 (18.80) |
.800 (20.32) |
.012 (.30) |
.222 (5.64) |
.347 (8.81) |
- |
.104 (2.64) |
|
PIN |
S ±.002 (0.05) inch (mm) |
U inch (mm) |
Y inch (mm) |
z ±.003 (0.08) inch (mm) |
AA ±.003 (0.08) inch (mm) |
AB inch (mm) |
AC ±.005 (0.13) inch (mm) |
AD ±.005 (0.13) inch (mm) |
|
MS27623-4C |
.016 (0.41) |
- |
- |
- |
- |
10° |
±.25° |
- |
- |
MS27623-6C |
.0267 (0.678) |
.1245 (3.162) |
.502 (12.75) |
.543 (13.79) |
12° |
±.25° |
- |
- |
|
MS27623-8C |
- |
- |
- |
- |
8° |
±.50° |
- |
- |
|
MS27623-10C |
- |
- |
- |
- |
8° |
±.50° |
.193 (4.90) |
.308 (7.82) |
|
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for information only.
3. Unless otherwise specified, tolerances shall be ±.005 inch (0.13 mm).
4. Radius or break all corners to .005 + .005/-.000 inch, (0.13 +0.13/-0.00 mm) unless otherwise specified.
5. Unless otherwise specified, surface roughness, in accordance with ASME B46.1, shall not exceed
125 µin Ra.
6. Dimensioning and tolerancing are in accordance with ASME Y14.5M.
7. In area AX, a dry-film lubricant shall be used as specified in SAE-AS5272. Dry film lubricant in area
AY shall not be cause for rejection. Dry film lubricant shall not be allowed in area Az.
8. All burrs and slivers shall be removed.
FIGURE 1. Sleeve dimensions and configuration - Continued.
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business