MS27622B
|
PIN |
AK ±.005 (0.13) inch (mm) |
AL ±2° |
AM ±2° |
AN ±2° |
AP |
AR .005 (0.13) inch (mm) |
AS ±.5° |
|
MS27622-4C |
- |
20° |
17° |
20° |
30° |
±.5° |
- |
- |
MS27622-6C |
.642 (16.31) |
16° |
45° |
45° |
- |
|||
MS27622-8C |
- |
10° |
10° |
60° |
- |
- |
||
MS27622-10C |
- |
30° |
15° |
40° |
45° |
±2° |
- |
.694 (17.63) |
PIN |
AT ±.005 (0.13 mm) inch(mm) |
AU ±5° |
AV +.005 -.000 (+0.13) inch (mm) |
AW ±.005 (0.13) inch (mm) |
AY (inch (mm) |
|
MS27622-4C |
.555 (14.10) |
15° |
- |
- |
.565 (14.35) |
+.008 -.000 (+0.20, -0.00) |
MS27622-6C |
.689 (17.50) |
- |
- |
.682 (17.32) |
+.009 -.000 (+0.23, -0.00) |
|
MS27622-8C |
.580 (14.73) |
- |
- |
.830 (21.08) |
+.007 -.000 (+0.18, -0.00) |
|
MS27622-10C |
- |
.914 (23.22) |
.578 (14.68) |
1.008 (25.60) |
+.008 -.000 (+0.20, -0.00) |
|
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for information only.
3. Unless otherwise specified, tolerances shall be ±.005 inch (0.13 mm).
4. Radius or break all corners to .005 +.005/-.000 inch (0.13 +.013/-.000 mm), unless otherwise specified.
5. Surface roughness, as specified in ASME B46.1, shall not exceed 125 µin Ra.
6. All burrs and slivers shall be removed.
7. Dimensioning and tolerancing are in accordance with ASME Y14.5M.
FIGURE 1. Socket dimensions and configuration - Continued. REQUIREMENTS:
Dimensions and configurations: The design, construction, and physical dimensions shall be in accordance with MIL-DTL-83296 and figure 1, in case of conflict between this specification sheet and MIL-DTL-83296, this specification sheet shall govern.
This part is a component of MS27616 through MS27618 and MS27629 through MS27631. The item is only procured as an integral part of an adapter assembly.
Material: Material shall be corrosion resistant steel, class 304, condition B, in accordance with
ASTM A276 or ASTM A473. Sizes -4, -6, and -8 shall have a minimum yield of 70,000 psi (483 MPa)
and size -10 shall have a minimum yield of 60,000 psi (414 MPa).
6
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business